[MPlayer-dev-eng] [PATCH] New slave command radio_step_freq

[Vladimir Voroshilov]

2006/11/16, RC <rcooley at spamcop.net>:
> On Wed, 15 Nov 2006 23:17:48 +0600
> voroshil at gmail.com wrote:
>
> > Hi, All
> > Attached patch adds ability to tune radio frequency using new slave
> > command: radio_step_freq. Step interval can be changed with step_value
> > parameter.
>
> Minor complaint...  MPlayer doesn't print out anything when you use
> this function, so you can only guess what frequency you're currently on.
>
> A simple MP_MSG,  "Selected frequency: 100.05" or similar would be a big
> improvement.
"Current frequency is: 100.05" printed in verbose (-v) mode.
I'm working on apropriate OSD message in this case.
>
> Otherwise, the patch (v2) seems to work fine.
> _______________________________________________
> MPlayer-dev-eng mailing list
> MPlayer-dev-eng at mplayerhq.hu
> http://lists.mplayerhq.hu/mailman/listinfo/mplayer-dev-eng
>


-- 
Regards,
Vladimir Voroshilov     mailto:voroshil at gmail.com
JID: voroshil at jabber.ru
ICQ: 95587719