[MPlayer-dev-eng] A DVD ripping example into docs?
diego at biurrun.de
Sat Dec 27 22:14:07 CET 2003
Sorry for responding this late, the message got blocked because you
were not subscribed to the mailing list.
Having something like this in the docs would be very cool.
Unfortunately I don't know squat about encoding, so I cannot really
review this. Once you have a patch ready, please send it to the
mplayer-docs mailing list. We'll help you with integrating the patch
into the docs structure there.
Samuli Kärkkäinen writes:
> My friend wrote what I consider a very good explanation of his process of
> creating a high quality rip of a DVD movie. Because I believe in examples
> and HOWTOs in documentation, I offer this (with his permission) as part of
> chapter 7 "Encoding with MEncoder" of the documentation. The title could be
> fe. "Making a high quality MPEG4 rip of a DVD movie".
> The text below is a direct copy of the original email. Obviously to be
> incorporated into documentation, the text must be reformatted and cleaned up
> somewhat. I'm willing to do that. Shall I do the formatting and post this as
> a patch against the manual?
> --- snip ---
> > Another thing, when you encode a DVD to your PC what setting do you use?
> Well I use Linux software, but the settings should mostly translate to
> any windows software you use, with the exception of the aspect ratio,
> which windows software doesn't support at all or very well.
> So you asked for it. It's not trivial. Basically I encode like this:
> 1. Play the DVD and run a crop detect filter on it. This gives me
> a crop rectangle to use for encoding. The reason for this is
> that many DVDs have a different aspect ratio than 1.779, which
> is the aspect a DVD stream is in. So you want to crop out the
> pointless black bars when you rip. A common aspect is 2.35,
> which is cinescope. Most big blockbuster movies have this
> aspect ratio.
> 2. With this new crop rectangle, calculate the aspect ratio for
> this movie. We preserve the aspect rather than scaling the
> video stream, because scaling just needlessly makes the video
> bigger. Lots of people do this because the aspect tag in the
> mpeg4 header is ignored by most/all windows players, but my
> Linux player recognizes it just fine. Sometimes the crop area
> requires manual tweaking. So say the crop area is 720:364:0:56
> (that's the actual crop area for Harry Potter 2). That means
> the raw video stream is 720x364, left offset 0, top offset 56.
> How to calculate the new aspect ratio? (Remember the DVD aspect
> ratio is 1.779, or 854/480). The aspect is not 720/364 because
> DVD video stream is scaled up. NTSC DVD video stream is 720x480
> but it is scaled to 854x480 when viewed to give the proper
> aspect ratio. So the aspect ratio for this Harry Potter DVD is
> really 720*(854/720)/364 or 2.346. Now I know aspect=2.346 for
> ripping, when using that crop area.
> 3. Next I must pick the quality level. Normally I use constant
> quantizing (aka constant quality, or variable bitrate). I don't
> care how big the movie is, only that the quality is good. With
> my encoder I use setting "vqscale=3" where 1 is the highest
> quality. BUT, if the movie is long and the total movie size
> will exceed 2GB, I suddenly care how big the movie is. The
> movie must be less than 2GB because my media player (and many
> others) can't index AVIs past 2GB which means no seeking in
> movies that big. There's an extension for AVIs called ODML that
> allows 64 bit indexing but mine doesn't support it yet, so I
> have to make sure the movie doesn't exceed 2GB. If it would be
> bigger than 2GB with constant quality, I go to step 4, otherwise
> I go to step 5.
> 4. So I have to make sure the movie is less than 2GB which it would
> be with vqscale=3. I could probably use vqscale=4 and make it
> smaller, but then I lose on quality. I want to make the movie
> the best possible quality that will fit in 2GB so I must use
> average bitrate encoding, or ABR, which involves 2 pass
> encoding. With ABR I must calculate the average video bitrate
> to use. You may have heard of 3 pass encoding, but that's used
> for ABR audio. I never ever ever compress my audio. I always
> copy the audio stream raw from DVD, so I can get the AC3
> stream. The AC3 stream, if it's DD5.1, is typically 448kbit.
> So if my movie is, say, 3 hours long (LoTR was), and I need to
> squeeze it into 2GB, and I know my audio bitrate is 448kbit/s,
> you can see how it's possible to determine the bitrate to use
> for a two pass.
> 5. At this point I figure out if the movie requires any filtering
> like increasing gamma, sharpening, etc. I never deinterlace
> video. I used to, but I now strongly believe that deinterlacing
> belongs during playback, not during encoding. Although it's my
> experience that most movies are not deinterlaced.
> 6. So now I know what filters I need to use, what my crop area and
> aspect ratio is, what bitrate to use if it's an ABR encoding,
> and I'm ready to go.
> If you're going to be a DVD ripping aficionado you need to know about
> telecine, aka 3-2/2-3 pulldown, and inverse telecine. The crux of it is
> that movies are filmed at a framerate of 23.976 fps (yes, exactly that)
> whereas NTSC video is 29.97 fps. If you rip a DVD at 29.97, you're really
> wasting space because of the way telecine works, plus you'll find that when
> the camera pans over some scene, it will look choppy. So for movies (i.e.
> not TV shows like Buffy or Friends or something), you should force output
> framerate to 23.976. And if your encoding software is any good, it will
> recognize that the video stream had undergone a pulldown process, and will
> apply inverse telecine to the video. This means your resulting rip will be
> 23.976 frames and will be the exact same frames used in the original film
> (more or less).
> So for my Harry Potter example above, I was able to use constant
> quantizing and it fit in under 2GB. (With constant quality really the
> only way to tell if it'll fit under 2GB is to rip it and find out.)
> Here is the command line I would use to rip that movie. It won't be
> much use to you, but you can see the settings I use, and maybe translate
> those into your software:
> mencoder -dvd 1 -oac copy -ovc lavc -lavcopts vcodec=mpeg4:vqscale=3:vhq:v4mv:keyint=250:aspect=2.346 -ofps 23.976 -vop crop=720:364:0:56 -o Harry_Potter_2.avi
> "-oac copy" says copy the audio stream raw from the DVD. vhq and v4mv
> are specific high quality settings for the mpeg4 codec I use. keyint
> says to specify a key frame every 250 frames. Etc., etc. I didn't
> apply any gamma or sharpening filters to this rip. Normally you don't
> need to, except for maybe older movies, or B&W, or some cartoons.
> A lot of this could be automated, but the whole process can't be. It's
> very much a manual thing as each DVD is different and you need to
> experiment sometimes to get the best results. More often than not,
> though, the formula above works just fine for me (with different crop
> area and aspect, of course).
> There you go. Easy as pie, eh?
> --- snap ---
> Samuli Kärkkäinen |\ _,,,---,,_
> skarkkai at woods.iki.fi ---------ZZZzz /,`.-'`' -. ;-;;,_------
> http://www.woods.iki.fi |,4- ) )-,_. ,\ ( `'-'
> '---''(_/--' `-'\_)
> MPlayer-dev-eng mailing list
> MPlayer-dev-eng at mplayerhq.hu
More information about the MPlayer-dev-eng