[MPlayer-cygwin] Can't get winvidix to work

[Chhaya, Harshal]

Sascha,

Thanks for your reply.

I was running mplayer on a different PC than the one I was building
it on.

Since the target PC doesn't have cygwin and I don't want to install 
it there, I tried the same on the 'build' PC. The build PC has a 
Matrox Graphics Millenium G200 video card. There are two 'mga' drivers
in the 'vidix/drivers' directory - mga_vid.so and mga_crtc2_vid.so -
and I guess one of them will work with the card.

> Seems like the driver files have to be somewhere else on cygwin
> Put them into /usr/local/lib/mplayer/vidix/ and try again.
> If it fails please send the full output of MPlayer.

I created the 'mplayer/vidix' directory under /usr/local/lib and
copied all the .so files there. This is the output I get:



bash-2.05b$ ./mplayer.exe  -vo winvidix -v file.avi

MPlayer 1.0pre5-3.3.1 (C) 2000-2004 MPlayer Team

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville 791.0 MHz
(Family: 6, St
epping: 3)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading config file mplayer/mplayer.conf: No such file or directory
Reading config file /cygdrive/c/Documents and
Settings/A0384599/.mplayer/config
Reading /cygdrive/c/Documents and
Settings/A0384599/.mplayer/codecs.conf: Can't
open '/cygdrive/c/Documents and Settings/A0384599/.mplayer/codecs.conf':
No such
 file or directory
Reading mplayer/codecs.conf: Can't open 'mplayer/codecs.conf': No such
file or d
irectory
Using built-in default codecs.conf.
CommandLine: '-vo' 'winvidix' '-v' 'file.avi'
get_path('font/font.desc') -> '/cygdrive/c/Documents and
Settings/A0384599/.mpla
yer/font/font.desc'
font: can't open file: /cygdrive/c/Documents and
Settings/A0384599/.mplayer/font
/font.desc
font: can't open file: ./share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using usleep() timing
get_path('input.conf') -> '/cygdrive/c/Documents and
Settings/A0384599/.mplayer/
input.conf'
Can't open input config file /cygdrive/c/Documents and
Settings/A0384599/.mplaye
r/input.conf: No such file or directory
Parsing input config file mplayer/input.conf
Input config file mplayer/input.conf parsed: 53 binds
get_path('file.avi.conf') -> '/cygdrive/c/Documents and
Settings/A0384599/.mplayer/
file.conf'

Playing file.avi.
[file] File size is 10655748 bytes
STREAM: [file] file.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
AVI file format detected.
list_end=0x146
======= AVI Header =======
us/frame: 33372  (fps=29.965)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (16) HAS_INDEX
frames  total: 7228   initial: 0
streams: 2
Suggested BufferSize: 0
Size:  256 x 192
==========================
list_end=0xD4
==> Found video stream: 0
====== STREAM Header =====
Type: vids   FCC: DIVX (58564944)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 0
Rate: 29965/1000 = 29.965
Start: 0   Len: 7228
Suggested BufferSize: 0
Quality 0
Sample size: 0
==========================
found 'bih', 40 bytes of 40
======= VIDEO Format ======
  biSize 40
  biWidth 256
  biHeight 192
  biPlanes 1
  biBitCount 24
  biCompression 808802372='DX50'
  biSizeImage 1013760
===========================
Regenerating keyframe table for DIVX 4 video
list_end=0x146
==> Found audio stream: 1
====== STREAM Header =====
Type: auds   FCC:  (0)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 0
Rate: 8000/1 = 8000.000
Start: 0   Len: 1929070
Suggested BufferSize: 0
Quality 0
Sample size: 0
==========================
found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 22050
avg byte/sec: 8000
Block align: 1
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x0
mp3.nBlockSize=417
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
===========================
list_end=0x9F115C
Found movie at 0x152 - 0x9F115C
Reading INDEX block, 14442 chunks for 7228 frames (fpos=0x9f1164)
AVI index offset: 0x14E (movi=0x152 idx0=0x4 idx1=0xFAC)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video size=8377212 (7228) audio size=1929070 (1929070)
VIDEO:  [DX50]  256x192  24bpp  29.965 fps  277.8 kbps (33.9 kbyte/s)
[V] filefmt:3  fourcc:0x30355844  size:256x192  fps:29.97  ftime:=0.0334
get_path('sub/') -> '/cygdrive/c/Documents and
Settings/A0384599/.mplayer/sub/'
get_path('default.sub') -> '/cygdrive/c/Documents and
Settings/A0384599/.mplayer
/default.sub'
========================================================================
==
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: made decode tables with MMX optimization
mp3lib: using MMX optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 2.0, Layer III, 22050 Hz 64 kbit Stereo, BPF: 209
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 22050 Hz, 2 ch, 16 bit (0x10), ratio: 8000->88200 (64.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
========================================================================
==
No vidix driver name provided, probing available ones (-v option for
details)!
vosub_vidix: Couldn't find working VIDIX driver
Error opening/initializing the selected video_out (-vo) device.

uninit audio: mp3lib
DEMUXER: freeing demuxer at 0x10130af8

Exiting... (End of file)
bash-2.05b$



Let me know if this helps or if you need any additional details.

Regards,
Harshal