[MPlayer-cygwin] win98 + winvidix + mach 64 not working!

[Compn]

At 1/16/2004 7:53:00 PM, you wrote:
>> ah, thought it would be easier than that, nevermind, i'm stupid
>> is there a readme/HOWTO for vidix on mingw anywhere?
>> 
>
>Copy libdha/bin/mapdev.vxd to windows/system and reboot.
>Compile mplayer with --enable-vidix and put the .so files from
>vidix/drivers into mplayer/vidix relative to your mplayer.exe
>Start playback with mplayer -vo winvidix
>
>Sascha
>


ok, i did that, compiled my first mingw build (sorry about that
i was using a build made by md)
still not work, stops at the end without opening vid window and not do anything
til i ctrl+c

my mplayer seems to need a mwgz.dll , i think i may have built it wrongly ;\
but it works fine otherwise (after i copy that dll from mingw to mplayer dir)

i understand that the driver may not work on all cards...


MPlayer dev-CVS-040116-15:24-3.2.3 (C) 2000-2004 MPlayer Team

CPU: Intel Pentium MMX P55C 166.3 MHz (Family: 5, Stepping: 3)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX

Reading config file /usr/local/etc/mplayer/mplayer.confReading config file C:/PROGRAMS/MPLAYER/mplayer/config
Reading C:/PROGRAMS/MPLAYER/mplayer/codecs.conf: 61 audio & 170 video codecs
CommandLine: '-v' '-vo' 'winvidix' 'bl.mpg'
Font C:\programs\mplayer\font-arial-18-iso-8859-1\font.desc loaded successfully! (206 chars)
Using MMX Optimized OnScreenDisplay
Using usleep() timing
get_path('input.conf') -> 'C:/PROGRAMS/MPLAYER/mplayer/input.conf'
Parsing input config file C:/PROGRAMS/MPLAYER/mplayer/input.conf
Input config file C:/PROGRAMS/MPLAYER/mplayer/input.conf parsed: 52 binds
get_path('bl.mpg.conf') -> 'C:/PROGRAMS/MPLAYER/mplayer/bl.mpg.conf'

Playing bl.mpg.
WINSOCK2 init: 0
[file] File size is 5173252 bytes
STREAM: [file] bl.mpg
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 00C59BA0  
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 00C59BA0  
Checking for NuppelVideo
DEMUXER: freeing demuxer at 00C59BA0  
Checking for REAL
DEMUXER: freeing demuxer at 00C59BA0  
Checking for SMJPEG
DEMUXER: freeing demuxer at 00C59BA0  
DEMUXER: freeing demuxer at 00C5A404  
Searching demuxer type for filename bl.mpg ext: .mpg
Checking for MOV
DEMUXER: freeing demuxer at 00C5A404  
Checking for VIVO
header block 1 size: 0
DEMUXER: freeing demuxer at 00C5A404  
DEMUXER: freeing demuxer at 00C5A404  
DEMUXER: freeing demuxer at 00C5A404  
DEMUXER: freeing demuxer at 00C5A404  
DEMUXER: freeing demuxer at 00C5A404  
Checking for PVA
DEMUXER: freeing demuxer at 00C5A404  
Checking for MPEG-TS...
TRIED UP TO POSITION 70766, FOUND 0, packet_size= 71, SEEMS A TS? 0
DEMUXER: freeing demuxer at 00C5A404  
Checking for LMLM4 Stream Format
Invalid packet in LMLM4 stream: ch=0 size=553648376
LMLM4 Stream Format not found
DEMUXER: freeing demuxer at 00C5A404  
system stream synced at 0xB (11)!
==> Found video stream: 0
MPEG-PS file format detected.
==> Found audio stream: 0
Searching for sequence header... OK!
VIDEO:  MPEG1  320x240  (aspect 1)  23.976 fps  512.0 kbps (64.0 kbyte/s)
[V] filefmt:2  fourcc:0x10000001  size:320x240  fps:23.98  ftime:=0.0417
get_path('sub/') -> 'C:/PROGRAMS/MPLAYER/mplayer/sub/'
get_path('default.sub') -> 'C:/PROGRAMS/MPLAYER/mplayer/default.sub'
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: made decode tables with MMX optimization
mp3lib: using MMX optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer II, 44100 Hz 128 kbit Dual-Channel, BPF: 418
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 16000->176400 (128.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
No vidix driver name provided, probing available ones (-v option for details)!
get_path('vidix/') -> 'C:/PROGRAMS/MPLAYER/mplayer/vidix/'
vidixlib: PROBING: C:/PROGRAMS/MPLAYER/mplayer/vidix/mach64_vid.so
[mach64] Found chip: 3D Rage I/II 215GT [Mach64 GT]
vidixlib: C:/PROGRAMS/MPLAYER/mplayer/vidix/mach64_vid.so probed o'k
vidixlib: will use C:/PROGRAMS/MPLAYER/mplayer/vidix/mach64_vid.so driver
vidixlib: Attempt to initialize driver at: 6BCC19D0
[mach64] version dev-CVS-040116-15:24-3.2.3
uninit audio: mp3lib
DEMUXER: freeing demuxer at 00C5A404  
DEMUXER: freeing sh_audio at 00C8D600  
DEMUXER: freeing sh_video at 00C8D3A0  
WINSOCK2 uninit