[MPlayer-cygwin] win98 + winvidix + mach 64 not working!

[Sascha Sommer]

> tried with this and  the other version, same results
> MPlayer dev-CVS-040112-09:19-3.3.1
>
> MPlayer 1.0pre3-3.2.3 (C) 2000-2003 MPlayer Team
>
> CPU: Intel Pentium MMX P55C 227.6 MHz (Family: 5, Stepping: 3)
> Detected cache-line size is 32 bytes
> CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
> Compiled with Runtime CPU Detection - WARNING - this is not optimal!
> To get best performance, recompile MPlayer
with --disable-runtime-cpudetection.
> Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or
directory
> Reading config file C:/PROGRAMS/MPLAYER/mplayer/config
> Reading C:/PROGRAMS/MPLAYER/mplayer/codecs.conf: 61 audio & 170 video
codecs
> CommandLine: '-v' '-vo' 'winvidix:mach64_vid.dll' 'bl.mpg'
> init_freetype
> Font C:\programs\mplayer\font-arial-18-iso-8859-1\font.desc loaded
successfully! (206 chars)
> Using MMX Optimized OnScreenDisplay
> Using usleep() timing
> get_path('input.conf') -> 'C:/PROGRAMS/MPLAYER/mplayer/input.conf'
> Parsing input config file C:/PROGRAMS/MPLAYER/mplayer/input.conf
> Input config file C:/PROGRAMS/MPLAYER/mplayer/input.conf parsed: 52 binds
> get_path('bl.mpg.conf') -> 'C:/PROGRAMS/MPLAYER/mplayer/bl.mpg.conf'
>
> Playing bl.mpg.
> WINSOCK2 init: 0
> [file] File size is 5173252 bytes
> STREAM: [file] bl.mpg
> STREAM: Description: File
> STREAM: Author: Albeu
> STREAM: Comment: based on the code from ??? (probably Arpi)
> Checking for YUV4MPEG2
> DEMUXER: freeing demuxer at 01A00BA8
> ASF_check: not ASF guid!
> DEMUXER: freeing demuxer at 01A00BA8
> Checking for NuppelVideo
> DEMUXER: freeing demuxer at 01A00BA8
> Checking for REAL
> DEMUXER: freeing demuxer at 01A00BA8
> Checking for SMJPEG
> DEMUXER: freeing demuxer at 01A00BA8
> DEMUXER: freeing demuxer at 01A01400
> DEMUXER: freeing demuxer at 01A01400
> Searching demuxer type for filename bl.mpg ext: .mpg
> Checking for MOV
> DEMUXER: freeing demuxer at 01A01400
> Checking for VIVO
> header block 1 size: 0
> DEMUXER: freeing demuxer at 01A01400
> DEMUXER: freeing demuxer at 01A01400
> DEMUXER: freeing demuxer at 01A01400
> DEMUXER: freeing demuxer at 01A01400
> DEMUXER: freeing demuxer at 01A01400
> DEMUXER: freeing demuxer at 01A01400
> Checking for PVA
> DEMUXER: freeing demuxer at 01A01400
> Checking for MPEG-TS...
> TRIED UP TO POSITION 70766, FOUND 0, packet_size= 71, SEEMS A TS? 0
> DEMUXER: freeing demuxer at 01A01400
> Checking for LMLM4 Stream Format
> Invalid packet in LMLM4 stream: ch=0 size=553648376
> LMLM4 Stream Format not found
> DEMUXER: freeing demuxer at 01A01400
> system stream synced at 0xB (11)!
> ==> Found video stream: 0
> MPEG-PS file format detected.
> ==> Found audio stream: 0
> Searching for sequence header... OK!
> VIDEO:  MPEG1  320x240  (aspect 1)  23.976 fps  512.0 kbps (64.0 kbyte/s)
> [V] filefmt:2  fourcc:0x10000001  size:320x240  fps:23.98  ftime:=0.0417
> get_path('sub/') -> 'C:/PROGRAMS/MPLAYER/mplayer/sub/'
> get_path('default.sub') -> 'C:/PROGRAMS/MPLAYER/mplayer/default.sub'
> ==========================================================================
> Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
> mp3lib: made decode tables with MMX optimization
> mp3lib: using MMX optimized decore!
> MP3lib: init layer2&3 finished, tables done
>
> MPEG 1.0, Layer II, 44100 Hz 128 kbit Dual-Channel, BPF: 418
> Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
> AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 16000->176400 (128.0 kbit)
> Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
> ==========================================================================
> get_path('vidix/') -> 'C:/PROGRAMS/MPLAYER/mplayer/vidix/'
> [mach64] Found chip: 3D Rage I/II 215GT [Mach64 GT]
> [mach64] Driver was forced. Was found known chip
> vidixlib: Attempt to initialize driver at: 6BCC1990
> [mach64] version dev-CVS-040112-09:19-3.3.1
> Cannot open driver, error=00000002
>
> tried not forcing it too... same result
>
> No vidix driver name provided, probing available ones (-v option for
details)!
> get_path('vidix/') -> 'C:/PROGRAMS/MPLAYER/mplayer/vidix/'
> vidixlib: PROBING: C:/PROGRAMS/MPLAYER/mplayer/vidix/cyberblade_vid.dll
> [cyberblade] Can't find chip
> vidixlib: PROBING: C:/PROGRAMS/MPLAYER/mplayer/vidix/mach64_vid.dll
> [mach64] Found chip: 3D Rage I/II 215GT [Mach64 GT]
> vidixlib: C:/PROGRAMS/MPLAYER/mplayer/vidix/mach64_vid.dll probed o'k
> vidixlib: will use C:/PROGRAMS/MPLAYER/mplayer/vidix/mach64_vid.dll driver
> vidixlib: Attempt to initialize driver at: 6BCC1990
> [mach64] version dev-CVS-040112-09:19-3.3.1
> Cannot open driver, error=00000002
>
>
> whats up?
> win98se
> ati mach 64 onboard video
> ibm aptiva c-65 2176
>
> anything i can do to help garner support for this onboard beast?
> this anything to do with the /'s being in the wrong way? e.g. c:/programs/
instead of
> correct c:\programs\.... ?
>

Did you install mapdev.vxd as described in libdha/bin/Readme ?
Don't expect it to work there is a big chance that it won't work and that it
will never work due to driver
conflicts. There might be system crashes and other weired behaviour.
Moreover there is no gpl dha helper
that works on all windows versions.

Sascha