[MPlayer-cvslog] r34810 - in trunk: configure libmpcodecs/ad_mpg123.c
diego
subversion at mplayerhq.hu
Tue Mar 13 12:44:05 CET 2012
Author: diego
Date: Tue Mar 13 12:44:05 2012
New Revision: 34810
Log:
Update ad_mpg123 in preparation to replace mp3lib.
patch by Thomas Orgis, thomas-forum orgis org
Modified:
trunk/configure
trunk/libmpcodecs/ad_mpg123.c
Modified: trunk/configure
==============================================================================
--- trunk/configure Sun Mar 11 17:27:32 2012 (r34809)
+++ trunk/configure Tue Mar 13 12:44:05 2012 (r34810)
@@ -6298,12 +6298,14 @@ else
fi
echores "$_mp3lib"
-# Any version of libmpg123 shall be fine.
+# Any version of libmpg123 that knows MPG123_RESYNC_LIMIT shall be fine.
+# That is, 1.2.0 onwards. Recommened is 1.14 onwards, though.
echocheck "mpg123 support"
def_mpg123='#undef CONFIG_MPG123'
if test "$_mpg123" = auto; then
_mpg123=no
- statement_check mpg123.h 'mpg123_init()' -lmpg123 && _mpg123=yes && extra_ldflags="$extra_ldflags -lmpg123"
+ statement_check mpg123.h 'mpg123_param(NULL, MPG123_RESYNC_LIMIT, -1, 0.)' -lmpg123 &&
+ _mpg123=yes && extra_ldflags="$extra_ldflags -lmpg123"
fi
if test "$_mpg123" = yes ; then
def_mpg123='#define CONFIG_MPG123 1'
Modified: trunk/libmpcodecs/ad_mpg123.c
==============================================================================
--- trunk/libmpcodecs/ad_mpg123.c Sun Mar 11 17:27:32 2012 (r34809)
+++ trunk/libmpcodecs/ad_mpg123.c Tue Mar 13 12:44:05 2012 (r34810)
@@ -1,7 +1,7 @@
/*
* MPEG 1.0/2.0/2.5 audio layer I, II, III decoding with libmpg123
*
- * Copyright (C) 2010 Thomas Orgis <thomas at orgis.org>
+ * Copyright (C) 2010-2012 Thomas Orgis <thomas at orgis.org>
*
* MPlayer is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -39,36 +39,20 @@ LIBAD_EXTERN(mpg123)
#include "libvo/fastmemcpy.h"
-/* We avoid any usage of mpg123 API that is sensitive to the large file
- * support setting. This ensures compatibility with a wide range of libmpg123
- * installs. This code is intended to work with version 1.0.0 of libmpg123.
- *
- * Though the chosen API subset is not affected by the choice of large file
- * support, the mpg123 header (old versions of which) might include a check
- * for matching _FILE_OFFSET_BITS. Since MPlayer does always define this one
- * for large file support, we are safe for any default mpg123 install that
- * either doesn't have such checks or defaults to the large value of
- * _FILE_OFFSET_BITS .
- * So, in short: There's no worry unless you have a non-default libmpg123
- * with intentionally disabled large file support. */
-/* You might need to #undef _FILE_OFFSET_BITS here on a 64 bit system
- with released mpg123 1.12 when using callback API. SVN snapshots
- should work fine. */
+/* Reducing the ifdeffery to two main variants:
+ * 1. most compatible to any libmpg123 version
+ * 2. fastest variant with recent libmpg123 (>=1.14)
+ * Running variant 2 on older libmpg123 versions may work in
+ * principle, but is not supported.
+ * So, please leave the check for MPG123_API_VERSION there, m-kay?
+ */
#include <mpg123.h>
-/* Selection of mpg123 usage patterns:
- * AD_MPG123_CALLBACK: Use callback API instead of feeding of memory buffers.
- * That needs mpg123>=1.12, on x86-64 SVN snapshot because of
- * _FILE_OFFSET_BITS being defined (see above).
- * AD_MPG123_PACKET: Use packet-based input (including pts handling).
- * AD_MPG123_SEEKBUFFER: Use internal mpg123 buffer to enhance stream parsing.
- * Makes sense with callback API only.
- * Any of those might affect I/O performance, might be significant compared
- * to the excessively optimized decoding.
- */
-/* #define AD_MPG123_CALLBACK */
-#define AD_MPG123_PACKET
-/* #define AD_MPG123_SEEKBUFFER */
+/* Enable faster mode of operation with newer libmpg123, avoiding
+ * unnecessary memcpy() calls. */
+#if (defined MPG123_API_VERSION) && (MPG123_API_VERSION >= 33)
+#define AD_MPG123_FRAMEWISE
+#endif
/* Switch for updating bitrate info of VBR files. Not essential. */
#define AD_MPG123_MEAN_BITRATE
@@ -84,77 +68,8 @@ struct ad_mpg123_context {
#endif
/* If the stream is actually VBR. */
char vbr;
-#if (defined AD_MPG123_CALLBACK) && (defined AD_MPG123_PACKET)
- unsigned char *packet;
- int packleft;
-#endif
};
-static void context_reset(struct ad_mpg123_context *con)
-{
-#ifdef AD_MPG123_MEAN_BITRATE
- con->mean_rate = 0.;
- con->mean_count = 0;
- con->delay = 1;
-#endif
-#if (defined AD_MPG123_CALLBACK) && (defined AD_MPG123_PACKET)
- con->packet = NULL;
- con->packleft = 0;
-#endif
-}
-
-
-#ifdef AD_MPG123_CALLBACK
-/* Mpg123 calls that for retrieving data.
- * This wrapper is at least needed for the call frame (ssize_t vs. int). */
-static ssize_t read_callback(void *ash, void *buf, size_t count)
-{
- sh_audio_t *sh = ash;
-#ifdef AD_MPG123_PACKET
- struct ad_mpg123_context *con = sh->context;
- unsigned char *target = buf;
- int need = count;
- ssize_t got = 0;
- while (need > 0) {
- if (con->packleft > 0) {
- int get = need > con->packleft ? con->packleft : need;
- /* Any difference to normal memcpy? */
- fast_memcpy(target, con->packet, get);
- /* OK, that does look redundant. */
- con->packet += get;
- con->packleft -= get;
- target += get;
- need -= get;
- got += get;
- } else {
- double pts;
- /* Feed more input data. */
- con->packleft = ds_get_packet_pts(sh->ds, &con->packet, &pts);
- if (con->packleft <= 0)
- break; /* Apparently that's it. EOF. */
-
- /* Next bytes from that presentation time. */
- if (pts != MP_NOPTS_VALUE) {
- sh->pts = pts;
- sh->pts_bytes = 0;
- }
- }
- }
- return got;
-#else
- /* It returns int... with the meaning of byte count. */
- return (ssize_t) demux_read_data(sh->ds, buf, count);
-#endif
-}
-
-/* Arbitrary input seeking is not supported with this MPlayer API(?).
- That also means that we won't read any ID3v1 tags. */
-static off_t seek_callback(void *sh, off_t pos, int whence)
-{
- return -1;
-}
-#endif
-
/* This initializes libmpg123 and prepares the handle, including funky
* parameters. */
static int preinit(sh_audio_t *sh)
@@ -170,8 +85,6 @@ static int preinit(sh_audio_t *sh)
sh->context = malloc(sizeof(struct ad_mpg123_context));
con = sh->context;
- context_reset(con);
-
/* Auto-choice of optimized decoder (first argument NULL). */
con->handle = mpg123_new(NULL, &err);
if (!con->handle)
@@ -185,17 +98,6 @@ static int preinit(sh_audio_t *sh)
if (mpg123_param(con->handle, MPG123_ADD_FLAGS, flag, 0.0) != MPG123_OK)
goto bad_end;
#endif
-#ifdef AD_MPG123_CALLBACK
- /* The I/O is handled via callbacks to MPlayer stream functions,
- * actually only the reading, as general seeking does not seem to be available */
- if (mpg123_replace_reader_handle(con->handle, read_callback,
- seek_callback, NULL) != MPG123_OK) {
- mp_msg(MSGT_DECAUDIO, MSGL_ERR, "mpg123 error: %s\n",
- mpg123_strerror(con->handle));
- mpg123_exit();
- return 0;
- }
-#endif
/* Basic settings.
* Don't spill messages, enable better resync with non-seekable streams.
@@ -203,10 +105,6 @@ static int preinit(sh_audio_t *sh)
* old libmpg123. Generally, it is not fatal if the flags are not
* honored */
mpg123_param(con->handle, MPG123_ADD_FLAGS, MPG123_QUIET, 0.0);
- /* Old headers don't know MPG123_SEEKBUFFER yet, so use the plain 0x100. */
-#ifdef AD_MPG123_SEEKBUFFER
- mpg123_param(con->handle, MPG123_ADD_FLAGS, 0x100, 0.0);
-#endif
/* Do not bail out on malformed streams at all.
* MPlayer does not handle a decoder throwing the towel on crappy input. */
mpg123_param(con->handle, MPG123_RESYNC_LIMIT, -1, 0.0);
@@ -217,9 +115,25 @@ static int preinit(sh_audio_t *sh)
* Don't forget to eventually enable ReplayGain/RVA support, too.
* Let's try to run with the default for now. */
+ /* That would produce floating point output.
+ * You can get 32 and 24 bit ints, even 8 bit via format matrix. */
+ /* mpg123_param(con->handle, MPG123_ADD_FLAGS, MPG123_FORCE_FLOAT, 0.); */
+
/* Example for RVA choice (available since libmpg123 1.0.0):
mpg123_param(con->handle, MPG123_RVA, MPG123_RVA_MIX, 0.0) */
+#ifdef AD_MPG123_FRAMEWISE
+ /* Prevent funky automatic resampling.
+ * This way, we can be sure that one frame will never produce
+ * more than 1152 stereo samples. */
+ mpg123_param(con->handle, MPG123_REMOVE_FLAGS, MPG123_AUTO_RESAMPLE, 0.);
+#else
+ /* Older mpg123 is vulnerable to concatenated streams when gapless cutting
+ * is enabled (will only play the jingle of a badly constructed radio
+ * stream). The versions using framewise decoding are fine with that. */
+ mpg123_param(con->handle, MPG123_REMOVE_FLAGS, MPG123_GAPLESS, 0.);
+#endif
+
return 1;
bad_end:
@@ -291,7 +205,19 @@ static void print_header_compact(struct
smodes[i->mode]);
}
-#ifndef AD_MPG123_CALLBACK
+/* return MPG123_OK if decoder is ready to produce output
+ * the other usual return code would be MPG123_NEED_MORE. */
+static int have_initial_frame(mpg123_handle *mh)
+{
+ long rate;
+ int chan, enc;
+ /* Abusing the format query function.
+ * It returns MPG123_OK if an intial frame has been parsed.
+ * It returns MPG123_NEED_MORE if input data is needed.
+ * Not handing NULL pointers for compatibility with old libmpg123. */
+ return mpg123_getformat(mh, &rate, &chan, &enc);
+}
+
/* This tries to extract a requested amount of decoded data.
* Even when you request 0 bytes, it will feed enough input so that
* the decoder _could_ have delivered something.
@@ -318,19 +244,13 @@ static int decode_a_bit(sh_audio_t *sh,
struct ad_mpg123_context *con = sh->context;
/* There will be one MPG123_NEW_FORMAT message on first open.
- * This will be implicitly handled in reopen_stream(). */
+ * This will be handled in init(). */
do {
size_t got_now = 0;
- ret = mpg123_decode(con->handle, NULL, 0, buf + got, count - got,
- &got_now);
- got += got_now;
-#ifdef AD_MPG123_PACKET
- sh->pts_bytes += got_now;
-#endif
+ /* Feed the decoder. This will only fire from the second round on. */
if (ret == MPG123_NEED_MORE) {
int incount;
-#ifdef AD_MPG123_PACKET
double pts;
unsigned char *inbuf;
/* Feed more input data. */
@@ -343,26 +263,45 @@ static int decode_a_bit(sh_audio_t *sh,
sh->pts = pts;
sh->pts_bytes = 0;
}
-#else
- const int inbufsize = 4096;
- unsigned char inbuf[inbufsize];
- /* Feed more input data. */
- incount = demux_read_data(((sh_audio_t *) sh)->ds,
- inbuf, inbufsize);
- if (incount == 0)
- break; /* Apparently that's it. EOF. */
-#endif
+#ifdef AD_MPG123_FRAMEWISE
+ /* Have to use mpg123_feed() to avoid decoding here. */
+ ret = mpg123_feed(con->handle, inbuf, incount);
+#else
/* Do not use mpg123_feed(), added in later libmpg123 versions. */
ret = mpg123_decode(con->handle, inbuf, incount, NULL, 0, NULL);
- /* Return value is checked in the loop condition.
- * It could be MPG12_OK now, it could need more. */
+#endif
+ if (ret == MPG123_ERR)
+ break;
}
- /* Older mpg123 versions might indicate MPG123_DONE, so be prepared. */
+ /* Theoretically, mpg123 could return MPG123_DONE, so be prepared.
+ * Should not happen in our usage, but it is a valid return code. */
else if (ret == MPG123_ERR || ret == MPG123_DONE)
break;
+ /* Try to decode a bit. This is the return value that counts
+ * for the loop condition. */
+#ifdef AD_MPG123_FRAMEWISE
+ if (!buf) { /* fake call just for feeding to get format */
+ ret = have_initial_frame(con->handle);
+ } else { /* This is the decoding. One frame at a time. */
+ ret = mpg123_replace_buffer(con->handle, buf, count);
+ if (ret == MPG123_OK)
+ ret = mpg123_decode_frame(con->handle, NULL, NULL, &got_now);
+ }
+#else
+ ret = mpg123_decode(con->handle, NULL, 0, buf + got, count - got,
+ &got_now);
+#endif
+
+ got += got_now;
+ sh->pts_bytes += got_now;
+
+#ifdef AD_MPG123_FRAMEWISE
+ } while (ret == MPG123_NEED_MORE || (got == 0 && count != 0));
+#else
} while (ret == MPG123_NEED_MORE || got < count);
+#endif
if (ret == MPG123_ERR) {
mp_msg(MSGT_DECAUDIO, MSGL_ERR, "mpg123 decoding failed: %s\n",
@@ -373,29 +312,22 @@ static int decode_a_bit(sh_audio_t *sh,
return got;
}
-#endif
/* Close, reopen stream. Feed data until we know the format of the stream.
* 1 on success, 0 on error */
static int reopen_stream(sh_audio_t *sh)
{
- long rate;
- int chan, enc;
struct ad_mpg123_context *con = (struct ad_mpg123_context*) sh->context;
mpg123_close(con->handle);
- context_reset(con);
+ /* No resetting of the context:
+ * We do not want to loose the mean bitrate data. */
-#ifdef AD_MPG123_CALLBACK
- if (MPG123_OK == mpg123_open_handle(con->handle, sh) &&
-#else
- if (/* Open and make sure we have fed enough data to get stream properties. */
- MPG123_OK == mpg123_open_feed(con->handle) &&
+ /* Open and make sure we have fed enough data to get stream properties. */
+ if (MPG123_OK == mpg123_open_feed(con->handle) &&
/* Feed data until mpg123 is ready (has found stream beginning). */
!decode_a_bit(sh, NULL, 0) &&
-#endif
- /* Not handing NULL pointers for compatibility with old libmpg123. */
- MPG123_OK == mpg123_getformat(con->handle, &rate, &chan, &enc)) {
+ MPG123_OK == have_initial_frame(con->handle)) {
return 1;
} else {
mp_msg(MSGT_DECAUDIO, MSGL_ERR,
@@ -443,7 +375,11 @@ static int init(sh_audio_t *sh)
* For VBR, the first frame will be a bad estimate. */
sh->i_bps = (finfo.bitrate ? finfo.bitrate : compute_bitrate(&finfo))
* 1000 / 8;
- context_reset(con);
+#ifdef AD_MPG123_MEAN_BITRATE
+ con->delay = 1;
+ con->mean_rate = 0.;
+ con->mean_count = 0;
+#endif
con->vbr = (finfo.vbr != MPG123_CBR);
sh->channels = channels;
sh->samplerate = rate;
@@ -477,6 +413,12 @@ static int init(sh_audio_t *sh)
mpg123_close(con->handle);
return 0;
}
+#ifdef AD_MPG123_FRAMEWISE
+ /* Going to decode directly to MPlayer's memory. It is important
+ * to have MPG123_AUTO_RESAMPLE disabled for the buffer size
+ * being an all-time limit. */
+ sh->audio_out_minsize = 1152 * 2 * sh->samplesize;
+#endif
return 1;
} else {
@@ -526,29 +468,13 @@ static int decode_audio(sh_audio_t *sh,
{
int bytes;
-#ifdef AD_MPG123_CALLBACK
- struct ad_mpg123_context *con = sh->context;
- size_t got_bytes = 0;
- if (MPG123_ERR == mpg123_read(con->handle, buf, minlen, &got_bytes)) {
- mp_msg(MSGT_DECAUDIO, MSGL_ERR, "Decoding error in mpg123: %s\n",
- mpg123_strerror(con->handle));
- return -1;
- }
-#ifdef AD_MPG123_PACKET
- sh->pts_bytes += got_bytes;
-#endif
- bytes = got_bytes;
-#else
- bytes = decode_a_bit(sh, buf, minlen);
-#endif
-
+ bytes = decode_a_bit(sh, buf, maxlen);
if (bytes == 0)
return -1; /* EOF */
#ifdef AD_MPG123_MEAN_BITRATE
update_info(sh);
#endif
-
return bytes;
}
More information about the MPlayer-cvslog
mailing list