[MPlayer-cvslog] r33966 - trunk/configure
diego
subversion at mplayerhq.hu
Thu Aug 11 19:45:28 CEST 2011
Author: diego
Date: Thu Aug 11 19:45:28 2011
New Revision: 33966
Log:
configure: spelling cosmetics
Modified:
trunk/configure
Modified: trunk/configure
==============================================================================
--- trunk/configure Thu Aug 11 19:45:25 2011 (r33965)
+++ trunk/configure Thu Aug 11 19:45:28 2011 (r33966)
@@ -58,7 +58,7 @@
touch ffmpeg/mp_auto_pull
fi
-# Prevent locale nonsense from breaking basic text processing utils
+# Prevent locale nonsense from breaking basic text processing utilities
export LC_ALL=C
# Store the configure line that was used
@@ -152,7 +152,7 @@ EOF
}
# The following checks are special and should only be used with broken and
-# non-selfsufficient headers that do not include all of their dependencies.
+# non-self-sufficient headers that do not include all of their dependencies.
header_check_broken() {
cat > $TMPC << EOF
@@ -192,7 +192,7 @@ tmp_run() {
"$TMPEXE" >> "$TMPLOG" 2>&1
}
-# Display error message, flushes tempfile, exit
+# Display error message, flush temporary file, exit.
die () {
echo
echo "Error: $@" >&2
@@ -429,7 +429,7 @@ Codecs:
--enable-musepack enable libmpcdec support (deprecated in favour of libavcodec) [disabled]
--disable-libopencore_amrnb disable libopencore_amr narrowband [autodetect]
--disable-libopencore_amrwb disable libopencore_amr wideband [autodetect]
- --disable-libopenjpeg disable OpenJPEG (JPEG2000) input/output support [autodetect]
+ --disable-libopenjpeg disable OpenJPEG (JPEG 2000) input/output support [autodetect]
--disable-crystalhd disable CrystalHD support [autodetect]
--disable-decoder=DECODER disable specified FFmpeg decoder
--enable-decoder=DECODER enable specified FFmpeg decoder
@@ -1413,7 +1413,7 @@ for ac_option do
--enable-iwmmxt) _iwmmxt=yes ;;
--disable-iwmmxt) _iwmmxt=no ;;
--enable-mmx) _mmx=yes ;;
- --disable-mmx) # 3Dnow! and MMX2 require MMX
+ --disable-mmx) # 3DNow! and MMX2 require MMX
_3dnow=no _3dnowext=no _mmx=no _mmxext=no ;;
*)
@@ -1715,20 +1715,20 @@ if test "$_nm" = auto ; then
test -z "$_nm" && _nm=nm
fi
-# XXX: this should be ok..
+# XXX: this should be OK..
_cpuinfo="echo"
if test "$_runtime_cpudetection" = no ; then
# Cygwin has /proc/cpuinfo, but only supports Intel CPUs
-# FIXME: Remove the cygwin check once AMD CPUs are supported
+# FIXME: Remove the Cygwin check once AMD CPUs are supported
if test -r /proc/cpuinfo && ! cygwin; then
# Linux with /proc mounted, extract CPU information from it
_cpuinfo="cat /proc/cpuinfo"
elif test -r /compat/linux/proc/cpuinfo && ! x86 ; then
# FreeBSD with Linux emulation /proc mounted,
# extract CPU information from it
- # Don't use it on x86 though, it never reports 3Dnow
+ # Don't use it on x86 though, it never reports 3DNow!
_cpuinfo="cat /compat/linux/proc/cpuinfo"
elif darwin && ! x86 ; then
# use hostinfo on Darwin
@@ -1818,9 +1818,9 @@ EOF
echores "$_mtrr"
if test "$_gcc3_ext" != ""; then
- # if we had to disable sse/sse2 because the active kernel does not
+ # If we had to disable SSE/SSE2 because the active kernel does not
# support this instruction set extension, we also have to tell
- # gcc3 to not generate sse/sse2 instructions for normal C code
+ # gcc3 to not generate SSE/SSE2 instructions for normal C code.
cflag_check $_march $_gcc3_ext && _march="$_march $_gcc3_ext"
fi
@@ -1879,7 +1879,7 @@ case "$host_arch" in
fi
;;
15) iproc=686
- # k8 cpu-type only supported in gcc >= 3.4.0, but that will be
+ # k8 CPU type only supported in gcc >= 3.4.0, but that will be
# caught and remedied in the optimization tests below.
proc=k8
;;
@@ -2140,7 +2140,7 @@ case "$host_arch" in
if test "$proc" = "k8"; then
cflag_check -march=$proc $cpuopt=$proc || proc=athlon-xp
fi
- # This will fail if gcc version < 3.3, which is ok because earlier
+ # This will fail if gcc version < 3.3, which is OK because earlier
# versions don't really support 64-bit on amd64.
# Is this a valid assumption? -Corey
if test "$proc" = "athlon-xp"; then
@@ -4390,7 +4390,7 @@ echores "$_xinerama"
# Note: the -lXxf86vm library is the VideoMode extension and though it's not
# needed for DGA, AFAIK every distribution packages together with DGA stuffs
# named 'X extensions' or something similar.
-# This check may be useful for future mplayer versions (to change resolution)
+# This check may be useful for future MPlayer versions (to change resolution)
# If you run into problems, remove '-lXxf86vm'.
echocheck "Xxf86vm"
if test "$_vm" = auto && test "$_x11" = yes ; then
@@ -4526,7 +4526,7 @@ if test "$_vidix" = yes ; then
#test "$_vidix_drivers" || _vidix_drivers="cyberblade ivtv mach64 mga mga_crtc2 nvidia pm2 pm3 radeon rage128 s3 sh_veu sis unichrome"
test "$_vidix_drivers" || _vidix_drivers="cyberblade mach64 mga mga_crtc2 nvidia pm2 pm3 radeon rage128 s3 sh_veu sis unichrome"
- # some vidix drivers are architecture and os specific, discard them elsewhere
+ # some VIDIX drivers are architecture and os-specific, discard them elsewhere
x86 || _vidix_drivers=$(echo $_vidix_drivers | sed -e s/cyberblade// -e s/sis// -e s/unichrome// -e s/s3//)
(test $host_arch = "sh" && linux) || _vidix_drivers=$(echo $_vidix_drivers | sed s/sh_veu//)
@@ -4790,7 +4790,7 @@ echocheck "PNG support"
if test "$_png" = auto ; then
_png=no
if irix ; then
- # Don't check for -lpng on irix since it has its own libpng
+ # Don't check for -lpng on IRIX since it has its own libpng
# incompatible with the GNU libpng
res_comment="disabled on irix (not GNU libpng)"
else
@@ -4847,7 +4847,7 @@ else
fi
-echocheck "OpenJPEG (JPEG2000) support"
+echocheck "OpenJPEG (JPEG 2000) support"
if test "$libopenjpeg" = auto ; then
libopenjpeg=no
define_statement_check OPJ_STATIC openjpeg.h 'opj_dparameters_t dec_params; opj_set_default_decoder_parameters(&dec_params)' -lopenjpeg && libopenjpeg=yes
@@ -4878,9 +4878,9 @@ echores "$_pnm"
echocheck "GIF support"
-# This is to appease people who want to force gif support.
+# This is to appease people who want to force GIF support.
# If it is forced to yes, then we still do checks to determine
-# which gif library to use.
+# which GIF library to use.
if test "$_gif" = yes ; then
_force_gif=yes
_gif=auto
@@ -5987,12 +5987,12 @@ if test "$_fontconfig" = auto ; then
#include <stdlib.h>
#include <fontconfig/fontconfig.h>
#if FC_VERSION < 20402
-#error At least version 2.4.2 of fontconfig required
+#error At least version 2.4.2 of Fontconfig required
#endif
int main(void) {
int err = FcInit();
if (err == FcFalse) {
- printf("Couldn't initialize fontconfig lib\n");
+ printf("Could not initialize Fontconfig library.\n");
exit(err);
}
return 0;
@@ -7746,7 +7746,7 @@ fi
echores "$_lircc"
if arm; then
-# Detect maemo development platform libraries availability (http://www.maemo.org),
+# Detect Maemo development platform libraries availability (http://www.maemo.org),
# they are used when run on Nokia 770|8x0
echocheck "maemo (Nokia 770|8x0)"
if test "$_maemo" = auto ; then
@@ -8761,7 +8761,7 @@ EOF
if test "$_mtrr" = yes ; then
- echo "Please check mtrr settings at /proc/mtrr (see DOCS/HTML/$language_doc/video.html#mtrr)"
+ echo "Please check MTRR settings at /proc/mtrr (see DOCS/HTML/$language_doc/video.html#mtrr)"
echo
fi
More information about the MPlayer-cvslog
mailing list