[Mplayer-cvslog] CVS: 0_90/DOCS mplayer.1,1.337,1.338
Diego Biurrun CVS
diego at mplayerhq.hu
Mon Mar 24 19:24:32 CET 2003
Update of /cvsroot/mplayer/0_90/DOCS
In directory mail:/var/tmp.root/cvs-serv28122
Modified Files:
mplayer.1
Log Message:
Man page synchronized with vop.txt plus further clarifications and
corrections in the -vop section.
Index: mplayer.1
===================================================================
RCS file: /cvsroot/mplayer/0_90/DOCS/mplayer.1,v
retrieving revision 1.337
retrieving revision 1.338
diff -u -r1.337 -r1.338
--- mplayer.1 20 Mar 2003 03:36:55 -0000 1.337
+++ mplayer.1 24 Mar 2003 18:24:30 -0000 1.338
@@ -1,7 +1,7 @@
.\" MPlayer (C) 2000-2003 Arpad Gereoffy
.\" This man page was/is done by Gabucino, Diego Biurrun, Jonas Jermann
.\"
-.\" Run this to get a html version of the man page:
+.\" Run this to get a HTML version of the man page:
.\" cat mplayer.1 | sed s/SS\ 20/SS\ 4/ | groff -man -Thtml - > manpage.html
.\" Run this to get a text version of the man page:
.\" groff -m man -Tascii mplayer.1 | col -bx > manpage.txt
@@ -1975,7 +1975,7 @@
.br
The parameters are optional and if omitted, some of them are set to default
values.
-Use -1 to keep the default value.
+Use '-1' to keep the default value.
Parameters w:h means width x height in pixels, x:y means x;y position counted
from the upper left corner of the bigger image.
.br
@@ -1987,6 +1987,11 @@
.IPs crop[=w:h:x:y]
Crops the given part of the image and discards the rest.
Useful to remove black bands from widescreen movies.
+.RSss
+w,h: Cropped width and height, defaults to original width and height.
+.br
+x,y: Position of the cropped picture, defaults to center.
+.REss
.IPs cropdetect[=0\-255]
Calculates necessary cropping parameters and prints the recommended parameters
to stdout.
@@ -1995,43 +2000,87 @@
(default: 24)
.IPs rectangle[=w:h:x:y]
Draws a rectangle of the requested width and height at the specified
-coordinates over the image (used to test crop).
-(default: maximum w/\:h, upper left x/\:y position)
+coordinates over the image (useful for testing crop parameters).
+.RSss
+w,h: width and height (default: -1, maximum possible width where boundaries
+are still visible.
+.br
+x,y: top left corner position (default: -1, uppermost leftmost)
+.REss
+.IPs
+The plugin responds to the input.conf directive 'change_rectangle'
+that takes two parameters.
+The first parameter can be 0 for w, 1 for h, 2 for x or 3 for y.
+The second parameter is the amount of pixels by which to change the
+designated rectangle boundary.
.IPs expand[=w:h:x:y:o]
Expands (not scales) movie resolution to the given value and places the
-unscaled original at coordinates x y. Negative values for w and h are
-treated as offsets to the original size. For example, expand=0:-50:0:0
-adds a 50 pixel border to the bottom of the picture.
-Can be used for placing subtitles/\:OSD in the resulting black bands (default:
-original w/\:h, centered x/\:y).
-The last parameter (de)activates OSD rendering (default: 0=disabled).
+unscaled original at coordinates x, y.
+Can be used for placing subtitles/\:OSD in the resulting black bands.
+.RSss
+w,h: expanded width,height (default: original width,height)
+.br
+x,y: position of original image on the expanded image (default: center)
+.br
+o: OSD/subtitle rendering
+ 0: disable (default)
+ 1: enable
+.REss
+.IPs
+Negative values for w and h are treated as offsets to the original size, e.g.
+expand=0:-50:0:0 adds a 50 pixel border to the bottom of the picture.
.IPs flip
Flips the image upside down.
See also option \-flip.
.IPs mirror
-Flips the image on Y axis.
+Mirrors the image on the Y axis.
.IPs rotate[=<0-7>]
Rotates and flips (optional) the image +/\:\- 90 degrees.
For parameters between 4-7 rotation is only done if the movie's geometry is
portrait and not landscape.
.IPs scale[=w:h[:c[:p]]]
Scales the image with the software scaler (slow) and performs a YUV<\->RGB
-colorspace conversion (see \-sws option too).
+colorspace conversion (also see \-sws option).
+.RSss
+w,h: new width/height after scaling (default: original width,height)
+ Note: If -zoom is used, and underlying filters (including libvo) are
+ incapable of scaling, then it defaults to d_width/\:d_height!
+ -1: original width/\:height
+ 0: scaled d_width/\:d_height
+ -2: Calculate w/\:h using the other dimension and the prescaled aspect ratio.
+ -3: Calculate w/\:h using the other dimension and the original aspect ratio.
+.br
+c: chroma skipping
+ 0: use all available input lines for chroma
+ 1: use only every 2. input line for chroma
+ 2: use only every 4. input line for chroma
+ 3: use only every 8. input line for chroma
+.br
+p: scaling parameter (depends upon the scaling method used)
+ for -sws 2 (bicubic) it is sharpness (0 (soft) - 100 (sharp))
+ for -sws 7 (gaussian) it is sharpness (0 (soft) - 100 (sharp))
+ for -sws 9 (lanczos) it is filter length (1 - 10)
The value 0 is used for scaled (aspect) destination w/\:h.
-(default: original w/\:h, destination w/\:h with \-zoom) Optionaly chroma
+(default: original w/\:h, destination w/\:h with \-zoom) Optionally chroma
skipping (c from 0\-3) and scaling parameters can be specified.
(see the \-sws option for details)
+.REss
.IPs yuy2
Forces software YV12/\:I420 or 422P to YUY2 conversion.
+Useful for video cards/\:drivers with slow YV12 but fast YUY2 support.
.IPs rgb2bgr[=swap]
-RGB 24/\:32 <\-> BGR 24/\:32 colorspace conversion with optional R <\-> B
-swapping.
+RGB 24/\:32 <\-> BGR 24/\:32 colorspace conversion.
+.RSss
+swap: Also perform R <\-> B swapping.
+.REss
.IPs palette
RGB/\:BGR 8 \-> 15/\:16/\:24/\:32bpp colorspace conversion using palette.
.IPs format[=fourcc]
-Restricts the colorspace for next filter.
-It does not do any conversion.
+Restricts the colorspace for the next filter without doing any conversion.
Use together with the scale filter for a real conversion.
+.RSss
+fourcc: format name like rgb15, bgr24, yv12, etc (default: yuy2)
+.REss
.IPs pp[=filter1[:option1[:option2...]]/[-]filter2...] (see \-pphelp too)
This option enables usage of MPlayer's internal postprocessing filter,
and also gives an interface where you can pass options to the named filter.
@@ -2075,27 +2124,44 @@
.br
\-vop pp=hb:y/vb:a \-autoq 6
.REss
+.IPs test
+Generate various test patterns.
.IPs lavc[=quality:fps]
-Realtime MPEG1 encoder for use with DVB/\:DXR3 (libavcodec)
+Fast software YV12 to MPEG1 conversion with libavcodec for use with DVB/\:DXR3.
+Faster and of better quality than \-vf fame.
+.RSss
+quality:
+ 1 \- 31 fixed qscale
+ 32 \- fixed bitrate in kBits
+.br
+fps: force output fps (float value) (default: 0, autodetect based on height)
+.REss
.IPs fame
-Realtime MPEG1 encoder for use with DVB/\:DXR3 (libfame)
+Fast software YV12 to MPEG1 conversion with libfame for use with DVB/\:DXR3.
.IPs dvbscale[=aspect]
-Set up optimal scaling for DVB cards.
-(aspect = DVB_HEIGHT*ASPECTRATIO, default: 768)
+Set up optimal scaling for DVB cards, scaling the X axis in hardware and
+calculating the Y axis scaling in software to keep aspect.
+.RSss
+aspect: control aspect ratio, calculate as DVB_HEIGHT*ASPECTRATIO (default:
+576*4/3=768), set it to 576*(16/9)=1024 for a 16:9 TV.
+.REss
+.IPs
+Only useful together with expand+scale:
+\-vf dvbscale,scale=-1:0,expand=-1:576:-1:-1:1,lavc
.IPs "noise[=luma[u][t|a][h][p]:chroma[u][t|a][h][p]]"
-Adds noise
+Adds noise.
.RSss
<0\-100>: luma noise
.br
<0\-100>: chroma noise
.br
-u: uniform noise
+u: uniform noise (gaussian otherwise)
.br
-t: temporal noise
+t: temporal noise (noise pattern changes between frames)
.br
-a: averaged temporal noise
+a: averaged temporal noise (smoother, but a lot slower)
.br
-h: high quality
+h: high quality (slightly better looking, slightly slower)
.br
p: mix random noise with a (semi)regular pattern
.REss
@@ -2112,20 +2178,24 @@
time: temporal strength (default = 6)
.REss
.IPs eq[=bright:cont]
-Activates the software equalizer with interactive controls like the hardware
-eq controls.
-The values can be from -100 to 100.
+Software equalizer with interactive controls just like the hardware
+equalizer, for cards/\:drivers that do not support brightness and
+contrast controls in hardware.
+Might also be useful with MEncoder, either for fixing poorly captured
+movies, or for slightly reducing contrast to mask artifacts and get by
+with lower bitrates.
+Initial values in the range -100 \- 100 may be given on the command line.
.IPs eq2[=gamma:contrast:brightness:saturation:rg:gg:bg]
Alternative software equalizer that uses lookup tables (very slow),
allowing gamma correction in addition to simple brightness,
contrast and saturation adjustment. Note that it uses the same MMX
-optimized code as -vop eq if all gamma values are 1.0!
+optimized code as \-vf eq if all gamma values are 1.0.
The parameters are given as floating point values.
-Defaults are gamma=1.0, contrast=1.0, brightness=0.0 and saturation=1.0.
Parameters rg, gg, bg are the independent gamma values for the Red, Green
-and Blue components, all default to 1.0.
-The values are 0.1\-10 for gammas, -2\-2 for contrast (negative values result
-in negative image) -1\-1 for brightness and 0\-3 for saturation.
+and Blue components.
+Defaults are 1.0, brightness=0.0.
+Value ranges are 0.1\-10 for gammas, -2\-2 for contrast (negative values result
+in a negative image), -1\-1 for brightness and 0\-3 for saturation.
.IPs halfpack[=f]
Convert planar YUV 4:2:0 to half-height packed 4:2:2, downsampling luma but
keeping all chroma samples.
@@ -2147,27 +2217,28 @@
.IPs "unsharp=l|cWxH:amount[:l|cWxH:amount]"
Unsharp mask / gaussian blur.
.RSss
-l: apply effect on luma component
+l: Apply effect on luma component.
.br
-c: apply effect on chroma components
+c: Apply effect on chroma components.
.br
WxH: width and height of the matrix, odd sized in both directions
(min = 3x3, max = 13x11 or 11x13, usually something between 3x3 and 7x7)
.br
-amount: relative amount of sharpness / blur to add to the image
-(amount < 0 = blur, amount > 0 = sharpen, usually something between -1.5 and
-1.5)
+amount: Relative amount of sharpness/\:blur to add to the image
+(a sane range should be -1.5 \- 1.5).
+ <0: blur
+ >0: sharpen
.REss
.IPs swapuv
Swap U & V plane.
.IPs "il=[d|i][s][:[d|i][s]]"
(de)interleaves lines.
-The goal of this filter is to add ability of processing interlaced images
-pre-field without deinterlacing it.
-You can filter your interlaced dvd and playback on TV without breaking the
+The goal of this filter is to add the ability to process interlaced images
+pre-field without deinterlacing them.
+You can filter your interlaced DVD and play it on a TV without breaking the
interlacing.
-While deinterlacing (with the post processing filter) removes the interlacing
-permamently (by smoothing averaging etc) deinterleaving splits the frame into
+While deinterlacing (with the postprocessing filter) removes interlacing
+permanently (by smoothing, averaging, etc) deinterleaving splits the frame into
2 fields (so called half pictures), so you can process (filter) them
independently and then re-interleave them.
.RSss
@@ -2178,7 +2249,7 @@
s: swap fields (exchange even & odd lines)
.REss
.IPs "field[=n]"
-Extracts a single field from interlaced image using stride arithmetic
+Extracts a single field from an interlaced image using stride arithmetic
to avoid wasting CPU time. The optional argument n specifies whether
to extract the even or the odd field (depending on whether n is even
or odd).
@@ -2226,16 +2297,16 @@
.RSss
radius: size of the filter
.br
-power: how often the filter should be applied
+power: How often the filter should be applied.
.REss
-.IPs "sab=rad:pfilter:cDiff[:rad:pfilter:cDiff]"
+.IPs "sab=rad:pf:colorDiff[:rad:pf:colorDiff]"
shape adaptive blur
.RSss
rad: blur filter strength (~0.1\-4.0) (slower if larger)
.br
-pfilter: prefilter strength (~0.1\-2.0)
+pf: prefilter strength (~0.1\-2.0)
.br
-cDiff: how different the pixels are allowed to be to be considered
+colorDiff: How different the pixels are allowed to be considered.
(~0.1-100.0)
.REss
.IPs "smartblur=rad:strength:thresh[:rad:strength:thresh]"
@@ -2248,7 +2319,7 @@
thresh: filter all (0), filter flat areas (0\-30) or filter edges (-30\-0)
.REss
.IPs "perspective=x0:y0:x1:y1:x2:y2:x3:y3:t"
-perspective correcture
+perspective correction
.RSss
x0,y0,...: coordinates of the top left, top right, bottom left, bottom right
corners
@@ -2260,7 +2331,7 @@
.IPs 1bpp
1bpp bitmap to YUV/BGR 8/15/16/32 conversion
.IPs "bmovl=hidden:opaque:<fifo>"
-Read bitmaps from a FIFO and display them in window.
+Read bitmaps from a FIFO and display them in a window.
.
.RSss
hidden: sets the default value of the 'hidden' flag (boolean)
More information about the MPlayer-cvslog
mailing list