[Mplayer-cvslog] CVS: main/etc example.conf,1.49,1.50

[Arpi of Ize]

Update of /cvsroot/mplayer/main/etc
In directory mail:/var/tmp.root/cvs-serv3602/etc

Modified Files:
	example.conf 
Log Message:
documenting vesa 3 / GTF config
patch by Rudolf Marek <MAREKR2 at cs.felk.cvut.cz>


Index: example.conf
===================================================================
RCS file: /cvsroot/mplayer/main/etc/example.conf,v
retrieving revision 1.49
retrieving revision 1.50
diff -u -r1.49 -r1.50
--- example.conf	6 Oct 2002 20:59:45 -0000	1.49
+++ example.conf	7 Oct 2002 11:27:20 -0000	1.50
@@ -75,8 +75,14 @@
 # ffactor = 0.75
 
 ##
-## FBdev driver: specify your monitor's timings, so resolutions
-## can be autodetected.
+## FBdev driver: 
+
+# fb = /dev/fb0				# framebuffer device to use
+# fbmode = 640x480-120			# use this mode (read from fb.modes!)
+# fbmodeconfig = /etc/fb.modes		# the fb.modes file
+
+## VESA and FBdev driver: specify your monitor's timings
+## 
 ## (see for example /etc/X11/XF86Config for timings!)
 ## ** CAUTION! IF YOUR DISPLAY DOESN'T SUPPORT AUTOMATICALLY TURNING OFF WHEN
 ##    OVERDRIVED (AND EVEN IF IT DOES), THIS MAY CAUSE DAMAGE TO YOUR DISPLAY!
@@ -85,10 +91,6 @@
 ## k, K : means multiply by 1000
 ## m, M : means multiply by 1.000.000
 ##
-
-# fb = /dev/fb0				# framebuffer device to use
-# fbmode = 640x480-120			# use this mode (read from fb.modes!)
-# fbmodeconfig = /etc/fb.modes		# the fb.modes file
 # monitor_hfreq = 31.5k-50k,70k		# horizontal frequency range
 # monitor_vfreq = 50-90			# vertical frequency range
 # monitor_dotclock = 30M-300M		# dotclock (or pixelclock) range