[Mplayer-cvslog] CVS: main/DOCS mencoder.1,1.41,1.42
Winner of tha face compo
gabucino at mplayerhq.hu
Sat May 4 07:30:08 CEST 2002
Update of /cvsroot/mplayer/main/DOCS
In directory mail:/var/tmp.root/cvs-serv30270
Modified Files:
mencoder.1
Log Message:
applied Jonas Jermann's patch
Index: mencoder.1
===================================================================
RCS file: /cvsroot/mplayer/main/DOCS/mencoder.1,v
retrieving revision 1.41
retrieving revision 1.42
diff -u -r1.41 -r1.42
--- mencoder.1 4 May 2002 05:27:48 -0000 1.41
+++ mencoder.1 4 May 2002 05:30:05 -0000 1.42
@@ -1,191 +1,158 @@
.\" MEncoder (C) 2000-2002 Arpad Gereoffy <sendmail at to.mplayer-users>
.\" This manpage was/is done by Gabucino
.\"
-.TH MEncoder 1
+.TH "MEncoder" "1" "2002-05-03"
+
.SH NAME
mencoder \- Movie Encoder for Linux
-.SH SYNOPSIS
+
+.SH "SYNOPSIS"
+.B mencoder
+.RB [options]\ [\fIfile\fP\ |\ \fIURL\fP\ |\ \fIplaylist\fP\ |\ \-\ ]\ [\-o\ file]
+.BR
+.B mencoder
+.RB [global\ options]\ \fIfile1\fP\ [specific\ options]\ [file2]\ [specific\ options]\ [\-o\ file]
+.BR
+.B mencoder
+.RB [global\ options]\ {\fIgroup\ of\ files\ and\ options\fP}\ [group\ specific\ options]\ [\-o\ file]
+.BR
+.B mencoder
+.RB [dvd|vcd|tv]://[title]\ [options]\ [\-o\ file]
+.BR
.B mencoder
-.RB [ \-vcd\ <track\ number> ]
-.RB [ \-dvd\ <titleid> ]
-.RB [ \-chapter\ <chapterid> ]
-.RB [ \-dvdangle\ <angleid> ]
-.RB [ \-dvdkey\ <key> ]
-.RB [ \-nobps ]
-.RB [ \-aid\ <id> ]
-.RB [ \-vid\ <id> ]
-.RB [ \-pp\ <quality> ]
-.RB [ \-vc\ <video\ codec\ name> ]
-.RB [ \-ac\ <audio\ codec\ name> ]
-.RB [ \-vfm\ <video\ codec\ family> ]
-.RB [ \-afm\ <audio\ codec\ family> ]
-.RB [ \-include\ <configfile> ]
-.RB [ \-mc\ seconds/5f ]
-.RB [ \-v ]
-.RB [ \-mp3file\ <filename> ]
-.RB [ \-ac3file\ <filename> ]
-.RB [ \-ovc\ <video\ codec\ name> ]
-.RB [ \-oac\ <audio\ codec\ name> ]
-.RB [ \-nosound ]
-.RB [ \-mf\ <multifile\ options> ]
-.RB [ \-divx4opts\ <codec\ options> ]
-.RB [ \-lavcopts\ <codec\ options> ]
-.RB [ \-lameopts\ <codec\ options> ]
-.RB [ \-pass\ <1/2> ]
-.RB [ \-passlogfile\ <filename> ]
-.RB [ \-ofps\ <fps> ]
-.RB [ \-o\ <filename> ]
-.RB [ \-frames\ <number> ]
-.RB [ \-sws\ <0-2> ]
-.RB [ \-ffourcc\ fourcc ]
-.RB [ \-ss\ <time> ]
-.RB [ \-endpos\ <time> ]
-.RB [ \-audiofile\ <file\ name> ]
-.RB [ \-sub\ <subtitle\ file\ name> ]
-.I - or file or files specified with escaped wildcard or device
-.PP
+.RB [mms|http]://URL[:port]\ [options]\ [\-o\ file]
+
.SH DESCRIPTION
-.I mencoder
+.B mencoder
MEncoder (MPlayer's Movie Encoder) is a simple movie encoder, designed to
-encode MPlayer-playable movies (AVI/DVD/VCD/VOB/MPG/MOV/VIV/NET) to other
-MPlayer-playable formats (see below). Currently it and encodes to divx4/xvid
-(using divx4linux/xvid core), libavcodec formats (including divx3 and mpeg4),
-raw uncompressed rgb (usable with virtualdub etc), PCM/MP3/VBRMP3 audio.
-Also has stream copying abilities.
-You can use MPlayer's video filters, so scale, crop, expand, flip, etc.
-.LP
-.SH "GENERAL OPTIONS"
-.TP
+encode MPlayer-playable movies (AVI/DVD/VCD/VOB/MPG/MOV/VIV/VIV/FLI/RM/NUV/NET)
+to other MPlayer-playable formats (see below). It encodes to DivX4
+(1, 2 or 3 passes), xvid, codecs of libavcodec, PCM/MP3/VBRMP3 audio.
+Also has stream copying abilities, a powerfull plugin system
+(crop, expand, flip, postprocess, rotate, scale, rgb/yuv conversion) and more.
+
+.SH "OPTIONS"
.I NOTE
Every "flag" option has "noflag" pair, e.g. -flag opposite is -noflag
-.TP
+.BR
.I NOTE
-CHECK THE HTML DOCUMENTATION TOO !
-.TP
+CHECK THE HTML DOCUMENTATION TOO!
+.BR
.I NOTE
As MEncoder uses the same 'libmpdemux' as MPlayer, their options are
-_sometimes the same_ ! So although for example the -sid option isn't
+_sometimes the same_! So although for example the -sid option isn't
mentioned here, you can use it in MEncoder too! (for encoding DVD with
subtitles)
.TP
-.B \-vcd <track number>
-Encode the specified VCD track.
-.TP
-.B \-dvd <title number>
-Encode the specified DVD title.
-.TP
-.B \-chapter <chapter id>
-Use with -dvd option (see above). Start encoding at the specified chapter.
-.TP
-.B \-dvdangle <angle id>
-Use with -dvd option (see above), and if the DVD disc has multiple angles.
-It will encode the angle specified here.
-.TP
-.B \-dvdkey <key>
-Used to decrypt CSS-encrypted streams on hard disk (with given CSS decrypt
-key).
-.TP
-.B \-nobps
-Used only for AVIs. Doesn't use the bps value in the AVI header, instead
-calculates it.
-.TP
-.B \-aid <audio stream id>
-If the source media contains multiple audio streams (for example DVDs), encode
-the specified one.
-.TP
-.B \-vid <video stream id>
-If the source media contains multiple video streams, encode the specified one.
-.TP
-.B \-pp <value>
-See man mplayer.
-.TP
-.B \-vc <codec name>
-Use specified codec (according to codecs.conf) for decoding input video
-stream.
+.B \-ac3file <filename>
.TP
.B \-ac <codec name>
Use specified codec (according to codecs.conf) for decoding input audio
stream.
.TP
-.B \-vfm <video codec family>
+.B \-afm <codec family>
Force decoding by using a specific codec FAMILY, and FALLBACK to default
if failed. For examples see MPlayer manpage.
.TP
-.B \-afm <audio codec family>
-Force decoding by using a specific codec FAMILY, and FALLBACK to default
-if failed. For examples see MPlayer manpage.
-.TP
-.B \-include
-specify config file to be parsed after the default
+.B \-aid <stream id>
+If the source media contains multiple audio streams (for example DVDs), encode
+the specified one.
.TP
-.B \-mc\ seconds/frame
-maximum sync correction per frame (in seconds).
-Use -mc 0 to disable input A/V sync.
+.B \-audiofile <filename>
+Copy audio from external file.
.TP
-.B \-v
-Increase verbosity.
+.B \-chapter <chapter id>
+Use with -dvd option (see above). Start encoding at the specified chapter.
.TP
-.B \-ovc <codecname>
-Encode with the given codec (codec names are from codecs.conf).
-Examples:
+.B \-divx4opts <options>
+If encoding to DivX4, you can specify its parameters here, like:
- -ovc help get help
- -ovc copy no encoding, just streamcopy
- -ovc divx4 encode to DivX4/DivX5 or XviD
- -ovc rawrgb encode to uncompressed RGB24
- -ovc lavc encode with a libavcodec codec
-.TP
-.B \-oac <codecname>
-Encode with the given codec (codec names are from codecs.conf).
-Examples:
+ -divx4opts br=1800:deinterlace:key=250
- -oac help get help
- -oac copy no encoding, just streamcopy
- -oac pcm encode to uncompressed PCM
- -oac mp3lame encode to MP3 (using Lame)
+Available options:
+
+ help get help
+ br=<value> specify bitrate in
+ kbit <4\-16000> or
+ bit <16001\-24000000>
+ key=<value> maximum keyframe interval
+ (in frames)
+ deinterlace enable deinterlacing
+ (don't use, DivX4 is buggy!)
+ q=<value> quality (1\-fastest, 5\-best)
+ min_quant=<value> minimum quantizer (0\-32)
+ max_quant=<value> maximum quantizer (0\-32)
+ rc_period=<value> rate control period
+ rc_reaction_period=<value>
+ rate control reaction period
+ rc_reaction_ratio=<value>
+ rate control reaction ratio
+ crispness=<value> (0\-100)
.TP
-.B \-nosound
-Encode only video, no audio stream.
+.B \-dvd <title id>
+Encode the specified DVD title.
.TP
-.B \-audiofile <file name>
-Copy audio from external file.
+.B \-dvdangle <angle id>
+Use with -dvd option (see above), and if the DVD disc has multiple angles.
+It will encode the angle specified here.
.TP
-.B \-mf <multifile options>
-Used when encoding from multiple JPEG files.
-Its sub-options are:
+.B \-dvdkey <CSS key>
+Used to decrypt CSS-encrypted streams on hard disk (with given CSS decrypt
+key).
+.TP
+.B \-endpos <time>
+Stop encoding at given time. Can be specified in many was :
- on turns on multifile support
- w=<value> width of the output file [autodetected]
- h=<value> height of the output file [autodetected]
- fps=<value> fps of the output file [default: 25fps]
- type=<value> type of input files (jpeg, png)
+ -endpos 56 encode only 56 seconds
+ -endpos 01:10:00 encode only 1 hours
+
+Can be used in conjuction with -ss!
.TP
-.B \-divx4opts
-If encoding to DivX4, you can specify its parameters here, like:
+.B \-ffourcc fourcc
+Can be used to force the video fourcc of the output file. For example -ffourcc
+div3 will have the output file contain "div3" as video fourcc.
+.TP
+.B \-frames <number>
+Encode only given number of frames.
+.TP
+.B \-include
+Specify config file to be parsed after the default
+.TP
+.B \-lameopts <options>
+If encoding to MP3 with libmp3lame, you can specify its parameters here, like:
- -divx4opts br=1800:deinterlace:key=250
+ -lameopts br=192:cbr
Available options:
- help get help
- br=XXX specify bitrate in
- kbit <4-16000> or
- bit <16001-24000000>
- key=XXX maximum keyframe interval
- (in frames)
- deinterlace enable deinterlacing
- (don't use, DivX4 is buggy!)
- q=XXXX quality (1-fastest, 5-best)
- min_quant=XXX minimum quantizer (0-32)
- max_quant=XXX maximum quantizer (0-32)
- rc_period=XXX rate control period
- rc_reaction_period=XXX rate control
- reaction period
- rc_reaction_ratio=XXX rate control
- reaction ratio
-
+ help get help
+ vbr=<value> variable bitrate method
+ 0=cbr
+ 1=mt
+ 2=rh(default)
+ 3=abr
+ 4=mtrh
+ abr average bitrate
+ cbr constant bitrate
+ br=<value> specify bitrate in
+ kbit <0-1024>
+ (only for CBR and ABR)
+ q=<value> Quality
+ (0-highest, 9-low)
+ (for VBR)
+ aq=<value> ?
+ ratio=<value> compression ratio <1-100>
+ vol=<value> set audio input gain <0-10>
+ mode=<value> 0=stereo
+ 1=joint-stereo
+ 2=dualchannel
+ 3=mono
+ (default: auto)
+ padding=<value> 0=no
+ 1=all
+ 2=adjust
.TP
-.B \-lavcopts
+.B \-lavcopts <options>
If encoding with a codec from libavcodec, you can specify its parameters here,
like:
@@ -193,114 +160,117 @@
Available options:
- help get help
+ help get help
- vcodec=XXX use the specified codec :
- mjpeg - Motion JPEG
- h263 - H263
- h263p - H263 Plus
- mpeg4 - DivX 4/5
- msmpeg4 - DivX 3
- rv10 - an old RealVideo codec
- mpeg1video - MPEG1 video :)
- There's no default, you must
- specify it.
-
- vbitrate=XXX specify bitrate in
- kbit <4-16000> or
- bit <16001-24000000>
- (warning: 1kbit = 1000 bits)
- default = 800k
-
- vratetol=XXX approximated *filesize* tolerance
- in kbits.
- (warning: 1kbit = 1000 bits)
- default = 1024*8 kbits = 1MByte
-
- keyint=XXX interval between keyframes
- (specify in frames, >300 are not
- recommended)
- default = 250 (one key frame every
- ten seconds in a 25fps movie)
-
- vhq high quality mode, macro blocks
- will be encoded multiple times and
- the smallest will be used.
- default = HQ disabled
-
- vme=XXX [0..5] motion estimation method :
- 0 - no ME at all
- 1 - ME_FULL
- 2 - ME_LOG
- 3 - ME_PHODS
- 4 - ME_EPZS
- 5 - ME_X1
- EPZS usually gives best results,
- but you can try X1 too. FULL is
- very slow and the others are
- experimental.
- default = EPZS
-
- vqcomp=XXX if the value is set to 1.0, the
- quantizer will stay nearly
- constant (high motion scenes will
- look bad). If it's 0.0, the
- quantizer will be changed
- to make all frames approximately
- equally sized (low motion scenes
- will look bad).
- default = 0.5
-
- vqblur=XXX blurs the quantizer graph over
- time.
- 0.0 : no blur
- 1.0 : average all past
- quantizers
- default = 0.5
-
- vqscale=XXX [2..31] gives each frame the same
- quantizer (selects fixed quantizer
- mode).
- default = 0 (fixed quantizer mode
- disabled)
-
- vrc_strategy=X [0..2] different strategies to
- decide which frames should get
- which quantizer.
- default = 2
-
- v4mv 4 motion vectors per macroblock,
- may gives you slightly better
- quality, can only be used in HQ
- mode and is buggy with B frames
- currently.
- default = disabled
-
- vpass=X [1,2] select internal first pass
- or second pass of 2-pass mode.
- default = 0 (1-pass mode)
+ vcodec=<value> use the specified codec :
+ mjpeg - Motion JPEG
+ h263 - H263
+ h263p - H263 Plus
+ mpeg4 - DivX 4/5
+ msmpeg4 - DivX 3
+ rv10 - an old RealVideo codec
+ mpeg1video - MPEG1 video :)
+ There's no default, you must
+ specify it.
+
+ vbitrate=<value> specify bitrate in
+ kbit <4-16000> or
+ bit <16001-24000000>
+ (warning: 1kbit = 1000 bits)
+ default = 800k
+
+ vratetol=<value> approximated *filesize* tolerance
+ in kbits.
+ (warning: 1kbit = 1000 bits)
+ default = 1024*8 kbits = 1MByte
+
+ keyint=<value> interval between keyframes
+ (specify in frames, >300 are not
+ recommended)
+ default = 250 (one key frame every
+ ten seconds in a 25fps movie)
+
+ vhq high quality mode, macro blocks
+ will be encoded multiple times and
+ the smallest will be used.
+ default = HQ disabled
+
+ vme=<value> [0..5] motion estimation method :
+ 0 - no ME at all
+ 1 - ME_FULL
+ 2 - ME_LOG
+ 3 - ME_PHODS
+ 4 - ME_EPZS
+ 5 - ME_X1
+ EPZS usually gives best results,
+ but you can try X1 too. FULL is
+ very slow and the others are
+ experimental.
+ default = EPZS
+
+ vqcomp=<value> if the value is set to 1.0, the
+ quantizer will stay nearly
+ constant (high motion scenes will
+ look bad). If it's 0.0, the
+ quantizer will be changed
+ to make all frames approximately
+ equally sized (low motion scenes
+ will look bad).
+ default = 0.5
+
+ vqblur=<value> blurs the quantizer graph over
+ time.
+ 0.0 : no blur
+ 1.0 : average all past
+ quantizers
+ default = 0.5
+
+ vqscale=<value> [2..31] gives each frame the same
+ quantizer (selects fixed quantizer
+ mode).
+ default = 0 (fixed quantizer mode
+ disabled)
+
+ vrc_strategy=<value>
+ [0..2] different strategies to
+ decide which frames should get
+ which quantizer.
+ default = 2
+
+ v4mv 4 motion vectors per macroblock,
+ may gives you slightly better
+ quality, can only be used in HQ
+ mode and is buggy with B frames
+ currently.
+ default = disabled
+
+ vpass=<value> [1,2] select internal first pass
+ or second pass of 2-pass mode.
+ default = 0 (1-pass mode)
The next 3 options apply only to I & P frames :
- vqmin=XX [1..31] minimum quantizer,
- default = 3
+ vqmin=<value> [1..31] minimum quantizer,
+ default = 3
- vqmax=XX [1..31] maximum quantizer
- default = 15
+ vqmax=<value> [1..31] maximum quantizer
+ default = 15
- vqdiff=XX [1..31] quantizer difference.
- Limits the maximum quantizer
- difference between frames.
- default = 3
+ vqdiff=<value> [1..31] quantizer difference.
+ Limits the maximum quantizer
+ difference between frames.
+ default = 3
The following options apply only to B frames :
- vmax_b_frames=X [0..4] maximum number of frames
+ vmax_b_frames=<value>
+ [0..4] maximum number of frames
between each I/P frame.
default = 0 (B-frames generation
disabled)
- vb_strategy=X strategy to choose between
+ vb_strategy=<value>
+ strategy to choose between
I/P/B frames :
0 allways use max B
1 avoid B frames in high
@@ -324,41 +294,54 @@
vrc_strategy, vb_strategy
All other options can be used in all modes.
-
.TP
-.B \-lameopts
-If encoding to MP3 with libmp3lame, you can specify its parameters here, like:
-
- -lameopts br=192:cbr
+.B \-mc\ <seconds/frame>
+Maximum sync correction per frame (in seconds).
+Use -mc 0 to disable input A/V sync.
+.TP
+.B \-mf <multifile options>
+Used when encoding from multiple JPEG files.
+Its sub-options are:
-Available options:
+ on turns on multifile support
+ w=<value> width of the output file [autodetected]
+ h=<value> height of the output file [autodetected]
+ fps=<value> fps of the output file [default: 25fps]
+ type=<value> type of input files (jpeg, png)
+.TP
+.B \-nobps
+Used only for AVIs. Doesn't use the bps value in the AVI header, instead
+calculates it.
+.TP
+.B \-nosound
+Encode only video, no audio stream.
+.TP
+.B \-o <filename>
+Outputs to the given filename, instead of the default 'test.avi'.
+.TP
+.B \-oac <codec name>
+Encode with the given codec (codec names are from codecs.conf,
+use -ovc help to get a list of available codecs).
+Examples:
- help get help
- vbr=XXX variable bitrate method
- 0=cbr
- 1=mt
- 2=rh(default)
- 3=abr
- 4=mtrh
- abr average bitrate
- cbr constant bitrate
- br=XXX specify bitrate in
- kbit <0-1024>
- (only for CBR and ABR)
- q=XXX Quality
- (0-highest, 9-low)
- (for VBR)
- ratio=XXX compression ratio <1-100>
- vol=XXX set audio input gain <0-10>
- mode=XXX 0=stereo
- 1=joint-stereo
- 2=dualchannel
- 3=mono
- (default: auto)
- padding=XXX 0=no
- 1=all
- 2=adjust
+ -oac copy no encoding, just streamcopy
+ -oac pcm encode to uncompressed PCM
+ -oac mp3lame encode to MP3 (using Lame)
+.TP
+.B \-ofps <fps>
+The output file will have different frame/sec than the source.
+You MUST set it for variable fps (asf, some mov) and progressive
+(29.97fps telecined mpeg) files.
+.TP
+.B \-ovc <codec name>
+Encode with the given codec (codec names are from codecs.conf,
+use -ovc help to get a list of available codecs).
+Examples:
+ -ovc copy no encoding, just streamcopy
+ -ovc divx4 encode to DivX4/DivX5 or XviD
+ -ovc rawrgb encode to uncompressed RGB24
+ -ovc lavc encode with a libavcodec codec
.TP
.B \-pass <1/2>
With this you can encode 2pass DivX4 files. First encode with -pass 1, then
@@ -367,52 +350,50 @@
.TP
.B \-passlogfile <filename>
When encoding in 2pass mode, MEncoder dumps first pass' informations
-to the given file instead of the default divx2pass.log .
+to the given file instead of the default divx2pass.log.
.TP
-.B \-ofps <fps>
-The output file will have different frame/sec than the source.
-You MUST set it for variable fps (asf, some mov) and progressive
-(29.97fps telecined mpeg) files.
-.TP
-.B \-o <filename>
-Outputs to the given filename, instead of the default 'test.avi' .
-.TP
-.B \-frames <number>
-Encode only given number of frames.
+.B \-pp <value>
+See man mplayer.
.TP
.B \-ss <time>
-seek to given time position. For example :
+Seek to given time position. For example:
-ss 56 seeks to 56 seconds
-ss 01:10:00 seeks to 1 hour 10 min
-Can start only from keyframes !
+Can start only from keyframes!
.TP
-.B \-sub <subtitle file name>
-given VOBsub/text subtitle will be encoded INTO the output file. Text
+.B \-sub <filename>
+Given VOBsub/text subtitle will be encoded INTO the output file. Text
subtitles need fonts properly installed.
.TP
-.B \-endpos <time>
-stop encoding at given time. Can be specified in many was :
-
- -endpos 56 encode only 56 seconds
- -endpos 01:10:00 encode only 1 hours
-
-Can be used in conjuction with -ss !
-.TP
-.B \-sws <0-2>
+.B \-sws <software scaler type>
Type of scaling method (use with -vop scale=w:h)
- 0 fast bilinear (default)
- 1 bilinear
- 2 bicubic (best quality)
+ 0 fast bilinear (default)
+ 1 bilinear
+ 2 bicubic (best quality)
+ 3 ?
+ 4 nearest neighbor (bad quality)
+ 5 area averageing scaling support
.TP
-.B \-ffourcc fourcc
-Can be used to force the video fourcc of the output file. For example -ffourcc
-div3 will have the output file contain "div3" as video fourcc.
-.IP
-.SH FILES AND DIRECTORIES
-.IP
+.B \-v, \-\-verbose
+Increase verbosity.
+.TP
+.B \-vc <codec name>
+Use specified codec (according to codecs.conf) for decoding input video
+stream.
+.TP
+.B \-vcd <track>
+Encode the specified VCD track.
+.TP
+.B \-vfm <codec family>
+Force decoding by using a specific codec FAMILY, and FALLBACK to default
+if failed. For examples see MPlayer manpage.
+.TP
+.B \-vid <stream id>
+If the source media contains multiple video streams, encode the specified one.
+
.SH "EXAMPLES"
.B Encoding DVD title #2
mencoder -dvd 2 -o title2.avi
@@ -423,33 +404,37 @@
.B The same, but with libavcodec family, MJPEG compression
mencoder -dvd 2 -o title2.avi -ovc lavc -lavcopts vcodec=mjpeg -ffourcc mjpg
.TP
+.B Encoding all *.jpg files in the current dir
+mencoder \*.jpg -mf on:w=800:h=600:fps=25 -o output.avi
+.TP
.B Encoding from HTTP
mencoder http://mplayer.hq/example.avi -o example.avi
.TP
+.B Encoding from tuner (see documentation!)
+mencoder -tv on:driver=v4l:width=640:height=480 -o tv.avi
+.TP
.B Encoding from a pipe
rar p test-SVCD.rar | mencoder -divx4opts br=800 -ofps 24 -pass 1 -- -
.TP
.B Encoding multiple *.vob files
cat *.vob | mencoder <options> -
-.IP
+
.SH BUGS
-Probably. Check the documentation.
+Probably. PLEASE, double-check the documentation (especially bugreports.html),
+the FAQ and the mail archive before!
-Bugreports should be addressed to the MPlayer-users mailing list
-(mplayer-users at mplayerhq.hu) ! If you want to submit a bugreport
-(which we love to receive!), please double-check the bugreports.html, and
-tell us all that we need to know to identify your problem.
+Send your complete bugreports to the MPlayer-users mailing list at
+<mplayer-users at mplayerhq.hu>. We love complete bugreports :)
-.LP
.SH AUTHORS
-Check documentation !
+Check documentation!
-MPlayer is (C) 2000-2002
+MPlayer is (C) 2000\-2002
.I Arpad Gereoffy <sendmail at to.mplayer-users>
This manpage is written and maintained by
-.I Gabucino .
-.LP
+.I Gabucino <sendmail at to.mplayer\-users>.
+
.SH STANDARD DISCLAIMER
Use only at your own risk! There may be errors and inaccuracies that could
be damaging to your system or your eye. Proceed with caution, and although
More information about the MPlayer-cvslog
mailing list