Debian unstable

uname -a
Linux mcguyver.whyi.org 2.4.19 #1 Mon Oct 14 00:57:45 PDT 2002 i586 AMD-K6(tm) 3D processor AuthenticAMD GNU/Linux

ls -l /lib/libc[.-]*
-rwxr-xr-x    1 root     root      1109900 Oct 17 06:48 /lib/libc-2.3.1.so
lrwxrwxrwx    1 root     root           14 Oct 14 00:31 /lib/libc.so.5 -> libc.so.5.4.46
-rw-r--r--    1 root     root       563068 Feb  4  2002 /lib/libc.so.5.4.46
lrwxrwxrwx    1 root     root           13 Oct 18 22:55 /lib/libc.so.6 -> libc-2.3.1.so

X -version

XFree86 Version 4.2.1 (Debian 4.2.1-3 20021016191246 branden@deadbeast.net) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18 i686 [ELF]
Module Loader present

gcc -v
Reading specs from /usr/lib/gcc-lib/i386-linux/2.95.4/specs
gcc version 2.95.4 20011002 (Debian prerelease)

ld -v
GNU ld version 2.13.90.0.10 20021010 Debian GNU/Linux

as --version
GNU assembler 2.13.90.0.10 20021010 Debian GNU/Linux
Copyright 2002 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License.  This program has absolutely no warranty.
This assembler was configured for a target of `i386-linux'.

cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 5
model           : 8
model name      : AMD-K6(tm) 3D processor
stepping        : 12
cpu MHz         : 350.803
cache size      : 64 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr
bogomips        : 699.59

lspci -vv
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
        Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin V/V+ AGP System Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 64
        Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: [b0] AGP version 1.0
                Status: RQ=27 SBA+ 64bit- FW- Rate=x1,x2
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M1541 PCI to AGP Controller (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: e4000000-e7ffffff
        Prefetchable memory behind bridge: e8000000-e9ffffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev c3)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
        Latency: 0

00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
        Subsystem: D-Link System Inc: Unknown device 1301
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 3
        Region 0: I/O ports at d000 [size=256]
        Region 1: Memory at eb101000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1) (prog-if fa)
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 3
        Region 4: I/O ports at f000 [size=16]

00:10.0 RAID bus controller: Promise Technology, Inc. 20246 (rev 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 7
        Region 0: I/O ports at d400 [size=8]
        Region 1: I/O ports at d804 [size=4]
        Region 2: I/O ports at dc00 [size=8]
        Region 3: I/O ports at e004 [size=4]
        Region 4: I/O ports at e400 [size=32]
        Expansion ROM at ea000000 [disabled] [size=64K]

00:12.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
        Subsystem: Creative Labs CT4850 SBLive! Value
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at e800 [size=32]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:12.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 01)
        Subsystem: Creative Labs Gameport Joystick
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Region 0: I/O ports at ec00 [size=8]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:14.0 Multimedia video controller: Auravision VxP524
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at eb000000 (32-bit, non-prefetchable) [disabled] [size=1M]

01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
        Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=32M]
        Region 1: Memory at e8000000 (32-bit, prefetchable) [size=32M]
        Region 2: I/O ports at c000 [size=256]
        Expansion ROM at e6000000 [disabled] [size=64K]
        Capabilities: [54] AGP version 1.0
                Status: RQ=7 SBA+ 64bit+ FW- Rate=x1,x2
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
        Capabilities: [60] Power Management version 1
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-