[FFmpeg-user] Issues Live Streaming Audio Only
Brett Garrett
brett at edgewaterbroadcasting.com
Wed Oct 31 23:23:15 EET 2018
I've been trying to stream an audio feed from a live source using the RTSP
protocol. The main goal is to eventually utilize jitter buffers or other
techniques to reduce/remove stutters and skips. Although, at the moment I
can't seem to get any audio to transfer over the network at all. I do have
a somewhat unique setup, and therefore don't have many other options to
work with.
I'm currently using Debian 9 with no gui for both the server and client(s).
I would say the biggest hangup or issue is having to use Jack (which uses
an ALSA device) for my output as it is used in several other applications
that interact with the audio output. All of which are not running for the
time being because I'm still just trying to get the stream from one
computer to another across my local network. Here's what I'm hoping is
enough information and that I'm not vomiting too much text.
A little info on our audio card specs...
root at test-9:~# *aplay -l*
**** List of PLAYBACK Hardware Devices ****
card 0: M44 [M Audio Delta 44], device 0: ICE1712 multi [ICE1712 multi]
Subdevices: 1/1
Subdevice #0: subdevice #0
root at test-9:~# *arecord --dump-hw-params -D hw:0,0*
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:0,0":
--------------------
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S32_LE
SUBFORMAT: STD
SAMPLE_BITS: 32
FRAME_BITS: 384
CHANNELS: 12
RATE: [8000 96000]
PERIOD_TIME: (20 341250]
PERIOD_SIZE: [2 2730]
PERIOD_BYTES: [96 131040]
PERIODS: [1 1024]
BUFFER_TIME: (20 682625]
BUFFER_SIZE: [2 5461]
BUFFER_BYTES: [96 262128]
TICK_TIME: ALL
--------------------
arecord: set_params:1299: Sample format non available
Available formats:
- S32_LE
Audio comes in through an analog XLR connection. Verified audio input is
good by using the following commands...
root at test-9:~# /usr/bin/dbus-run-session ffmpeg -f jack -i ffmpeg -y
output.wav
root at test-9:~# jack_connect system:capture_1 ffmpeg:input_1 && jack_connect
system:capture_2 ffmpeg:input_2
Waited a while then killed the tasks. Acquired the output.wav and it played
with good audio. Although, I need to be able to get it from one computer to
another through a live feed (not recording to some single file that will
grow to crazy sizes).
So here's my server config setup. Without the comments.
root at test-9:~# *grep ^[^#] /etc/ffserver.conf*
HTTPPort 8585
RTSPPort 15151
HTTPBindAddress 0.0.0.0
MaxHTTPConnections 2000
MaxClients 1000
MaxBandwidth 1000
CustomLog -
<Feed feed1.ffm>
File /tmp/feed1.ffm
FileMaxSize 200K
ACL allow 127.0.0.1
</Feed>
<Stream test1-rtsp.ogg>
Format rtp
Feed feed1.ffm
NoVideo
AudioCodec aac
AudioChannels 2
AudioBitRate 64
AudioSampleRate 48000
AVOptionAudio flags +global_header
</Stream>
<Stream stat.html>
Format status
ACL allow localhost
ACL allow 192.168.0.0 192.168.255.255
</Stream>
<Redirect index.html>
URL http://www.ffmpeg.org/
</Redirect>
root at test-9:~# *ffserver -loglevel debug &*
[1] 11631
root at test-9:~# ffserver version 3.2.10-1~deb9u1 Copyright (c) 2000-2018 the
FFmpeg developers
built with gcc 6.3.0 (Debian 6.3.0-18) 20170516
configuration: --prefix=/usr --extra-version='1~deb9u1'
--toolchain=hardened --libdir=/usr/lib/i386-linux-gnu
--incdir=/usr/include/i386-linux-gnu --enable-gpl --disable-stripping
--enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa
--enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca
--enable-libcdio --enable-libebur128 --enable-libflite
--enable-libfontconfig --enable-libfreetype --enable-libfribidi
--enable-libgme --enable-libgsm --enable-libmp3lame --enable-libopenjpeg
--enable-libopenmpt --enable-libopus --enable-libpulse
--enable-librubberband --enable-libshine --enable-libsnappy
--enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora
--enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack
--enable-libwebp --enable-libx265 --enable-libxvid --enable-libzmq
--enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2
--enable-libdc1394 --enable-libiec61883 --enable-chromaprint
--enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
libavutil 55. 34.101 / 55. 34.101
libavcodec 57. 64.101 / 57. 64.101
libavformat 57. 56.101 / 57. 56.101
libavdevice 57. 1.100 / 57. 1.100
libavfilter 6. 65.100 / 6. 65.100
libavresample 3. 1. 0 / 3. 1. 0
libswscale 4. 2.100 / 4. 2.100
libswresample 2. 3.100 / 2. 3.100
libpostproc 54. 1.100 / 54. 1.100
Tue Oct 30 13:23:01 2018 [file @ 0xfe65c0]Setting default whitelist
'file,crypto'
Tue Oct 30 13:23:01 2018 [ffm @ 0xfe39e0]Using AVStream.codec to pass codec
parameters to muxers is deprecated, use AVStream.codecpar instead.
Tue Oct 30 13:23:01 2018 writing recommended configuration:
ac=2,b=64000,ar=48000,flags=+global_header
Tue Oct 30 13:23:01 2018 [AVIOContext @ 0xfe6660]Statistics: 0 seeks, 1
writeouts
Tue Oct 30 13:23:01 2018 FFserver started.
root at test-9:~# */usr/bin/dbus-run-session ffmpeg -f jack -i ffmpeg
http://127.0.0.1:8585/feed1.ffm <http://127.0.0.1:8585/feed1.ffm>*
ffmpeg version 3.2.10-1~deb9u1 Copyright (c) 2000-2018 the FFmpeg developers
built with gcc 6.3.0 (Debian 6.3.0-18) 20170516
configuration: --prefix=/usr --extra-version='1~deb9u1'
--toolchain=hardened --libdir=/usr/lib/i386-linux-gnu
--incdir=/usr/include/i386-linux-gnu --enable-gpl --disable-stripping
--enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa
--enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca
--enable-libcdio --enable-libebur128 --enable-libflite
--enable-libfontconfig --enable-libfreetype --enable-libfribidi
--enable-libgme --enable-libgsm --enable-libmp3lame --enable-libopenjpeg
--enable-libopenmpt --enable-libopus --enable-libpulse
--enable-librubberband --enable-libshine --enable-libsnappy
--enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora
--enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack
--enable-libwebp --enable-libx265 --enable-libxvid --enable-libzmq
--enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2
--enable-libdc1394 --enable-libiec61883 --enable-chromaprint
--enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
libavutil 55. 34.101 / 55. 34.101
libavcodec 57. 64.101 / 57. 64.101
libavformat 57. 56.101 / 57. 56.101
libavdevice 57. 1.100 / 57. 1.100
libavfilter 6. 65.100 / 6. 65.100
libavresample 3. 1. 0 / 3. 1. 0
libswscale 4. 2.100 / 4. 2.100
libswresample 2. 3.100 / 2. 3.100
libpostproc 54. 1.100 / 54. 1.100
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jackdmp 1.9.11
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2014 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
no message buffer overruns
no message buffer overruns
no message buffer overruns
JACK server starting in realtime mode with priority 10
self-connect-mode is "Don't restrict self connect requests"
audio_reservation_init
Acquire audio card Audio0
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
[jack @ 0x2494700] JACK client registered and activated (rate=48000Hz,
buffer_size=1024 frames)
Guessed Channel Layout for Input Stream #0.0 : stereo
Input #0, jack, from 'ffmpeg':
Duration: N/A, start: 1540927425.470458, bitrate: 3072 kb/s
Stream #0:0: Audio: pcm_f32le, 48000 Hz, stereo, flt, 3072 kb/s
Tue Oct 30 13:23:45 2018 [NULL @ 0xfe39e0]Opening '/tmp/feed1.ffm' for
reading
Tue Oct 30 13:23:45 2018 [file @ 0xfe46c0]Setting default whitelist
'file,crypto'
Tue Oct 30 13:23:45 2018 [ffm @ 0xfe39e0]Format ffm probed with size=2048
and score=101
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'ac' to
value '2'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'b' to
value '64000'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'ar' to
value '48000'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'flags' to
value '+global_header'
Tue Oct 30 13:23:45 2018 writing recommended configuration:
ac=2,b=64000,ar=48000,flags=+global_header
Tue Oct 30 13:23:45 2018 127.0.0.1 - - [GET] "/feed1.ffm HTTP/1.1" 200 4175
Tue Oct 30 13:23:45 2018 [AVIOContext @ 0xfe6720]Statistics: 4096 bytes
read, 0 seeks
Output #0, ffm, to 'http://127.0.0.1:8585/feed1.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #0:0: Audio: aac (LC), 48000 Hz, stereo, fltp, 64 kb/s
Metadata:
encoder : Lavc57.64.101 aac
Stream mapping:
Stream #0:0 -> #0:0 (pcm_f32le (native) -> aac (native))
Press [q] to stop, [?] for help
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'b' to
value '64000'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'ab' to
value '64000'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'flags' to
value '0x00400000'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'ar' to
value '48000'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'ac' to
value '2'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key
'frame_size' to value '1024'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'profile'
to value '1'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key
'channel_layout' to value '3'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key
'time_base' to value '1/48000'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key 'delay' to
value '1024'
Tue Oct 30 13:23:45 2018 [NULL @ 0xff0f20]Setting entry with key
'pkt_timebase' to value '1/1000000'
Changing text at the bottom makes it appear like 'somethings happening'.
There is a slow bit transfer because I have not connected the jack
inputs/outputs.
size= 72kB time=00:01:07.08 bitrate= 8.8kbits/s speed= 1x
root at test-9:~# *jack_connect system:capture_1 ffmpeg:input_1 &&
jack_connect system:capture_2 ffmpeg:input_2 && jack_lsp -c*
system:capture_1
ffmpeg:input_1
system:capture_2
ffmpeg:input_2
system:capture_3
system:capture_4
system:capture_5
system:capture_6
system:capture_7
system:capture_8
system:capture_9
system:capture_10
system:capture_11
system:capture_12
system:playback_1
system:playback_2
system:playback_3
system:playback_4
system:playback_5
system:playback_6
system:playback_7
system:playback_8
system:playback_9
system:playback_10
ffmpeg:input_1
system:capture_1
ffmpeg:input_2
system:capture_2
size= 800kB time=00:03:31.24 bitrate= 31.0kbits/s speed= 1x
The bitrate goes up, so I'm assuming this means it is receiving the audio
alright and that everything's in place. Go to
http://192.168.1.119:8585/stat.html the page comes up with...
[see attached picture]
Time to see if we can get the stream from another computer...
root at test-17:~# ffplay -nodisp rtsp://192.168.1.119:15151/test1-rtsp.ogg
ffplay version 3.2.12-1~deb9u1 Copyright (c) 2003-2018 the FFmpeg developers
built with gcc 6.3.0 (Debian 6.3.0-18+deb9u1) 20170516
configuration: --prefix=/usr --extra-version='1~deb9u1'
--toolchain=hardened --libdir=/usr/lib/i386-linux-gnu
--incdir=/usr/include/i386-linux-gnu --enable-gpl --disable-stripping
--enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa
--enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca
--enable-libcdio --enable-libebur128 --enable-libflite
--enable-libfontconfig --enable-libfreetype --enable-libfribidi
--enable-libgme --enable-libgsm --enable-libmp3lame --enable-libopenjpeg
--enable-libopenmpt --enable-libopus --enable-libpulse
--enable-librubberband --enable-libshine --enable-libsnappy
--enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora
--enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack
--enable-libwebp --enable-libx265 --enable-libxvid --enable-libzmq
--enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2
--enable-libdc1394 --enable-libiec61883 --enable-chromaprint
--enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
libavutil 55. 34.101 / 55. 34.101
libavcodec 57. 64.101 / 57. 64.101
libavformat 57. 56.101 / 57. 56.101
libavdevice 57. 1.100 / 57. 1.100
libavfilter 6. 65.100 / 6. 65.100
libavresample 3. 1. 0 / 3. 1. 0
libswscale 4. 2.100 / 4. 2.100
libswresample 2. 3.100 / 2. 3.100
libpostproc 54. 1.100 / 54. 1.100
nan : 0.000 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
Then it just sits there. No audio, but that's not surprising since normally
I'd have to pipe the audio out through jack (no doable with ffmpeg, to my
knowledge). So I re-enabled the integrated audio to see if it might
automatically pipe the audio out to that device, but I get the same output
noted above and still no audio. When I run the same command on server. I
get the exact same output on the new ssh prompt I opened up. Even if I
change the ip address to 'localhost'. Although, on the ssh prompt where I
started up ffserver from I get the following output pop up along with the
constantly updating bitrate...
Wed Oct 30 14:37:35 2018 [NULL @ 0x128cfe0]Opening '/tmp/feed1.ffm' for
reading
Wed Oct 30 14:37:35 2018 [file @ 0x127be20]Setting default whitelist
'file,crypto'
Wed Oct 30 14:37:35 2018 [ffm @ 0x128cfe0]Format ffm probed with size=2048
and score=101
Wed Oct 30 14:37:35 2018 [NULL @ 0x128e8a0]Setting entry with key 'strict'
to value '-2'
Wed Oct 30 14:37:35 2018 [NULL @ 0x128e8a0]Setting entry with key 'ac' to
value '2'
Wed Oct 30 14:37:35 2018 [NULL @ 0x128e8a0]Setting entry with key 'b' to
value '128000'
Wed Oct 30 14:37:35 2018 [NULL @ 0x128e8a0]Setting entry with key 'ar' to
value '48000'
Wed Oct 30 14:37:35 2018 [NULL @ 0x128e8a0]Setting entry with key 'flags'
to value '+global_header'
Wed Oct 30 14:37:35 2018 [rtp @ 0x128f440]No default whitelist set
Wed Oct 30 14:37:35 2018 [udp @ 0x1290c20]No default whitelist set
Wed Oct 30 14:37:35 2018 [udp @ 0x1290d60]No default whitelist set
Wed Oct 30 14:37:35 2018 192.168.1.119:31830 - - "PLAY
test1-rtsp.ogg/streamid=0 RTP/UDP"
Wed Oct 30 14:37:35 2018 Failed to parse interval end specification ''
I couldn't find much on the final line there about the "Failed to parse
interval end specification ''" or of a way to fix it I mean. I've tried
adding -analyzeduration and -probesize on both the ffmpeg command that
uploads the audio to the feed, and also on the ffplay command that should
play the feed. They did absolutely nothing to change anything.
I'm pretty sure it's not firewall related. ufw and iptables are not
installed.
root at test-9:~# iptables
-su: iptables: command not found
root at test-9:~# ufw
-su: ufw: command not found
It feels like I'm missing some config option somewhere, but I can't figure
out where. All I see everywhere are examples of people setting up streams
with webcams or other video related formats and very little that just deals
with audio only, nothing has worked for me so far. I'm open to any and all
suggestions. Thank you for your time.
--
Brett
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rtsp server status.PNG
Type: image/png
Size: 32850 bytes
Desc: not available
URL: <http://ffmpeg.org/pipermail/ffmpeg-user/attachments/20181031/90116b64/attachment.png>
More information about the ffmpeg-user
mailing list