[FFmpeg-soc] [soc] libavsequencer [PATCH 07/08] Sample synth sound public API header file.
Sebastian Vater
cdgs.basty at googlemail.com
Sun Jul 11 22:11:49 CEST 2010
Michael Niedermayer a écrit :
> On Wed, Jul 07, 2010 at 10:49:34PM +0200, Sebastian Vater wrote:
>
> [...]
>
>> + /** 0x01: KILL vX+YYYY
>> + Stops and frees current channel, most likely to be used in NNA
>> + handling code. vX+YYYY is the number of ticks to wait before
>> + the channel actually will be killed. Synth code instruction
>> + processing continues as normally until the wait counter has
>> + been reached. Please note that even with YYYY set to zero, all
>> + instructions executing in the same tick as the KILL instruction
>> + will continue do so. If you don't want this, just place a STOP
>> + instruction straight afterwards. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_KILL 0x01
>> +
>> + /** 0x02: WAIT vX+YYYY
>> + Waits the given amount in ticks specified by vX+YYYY before
>> + continue processing of synth code instructions. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_WAIT 0x02
>> +
>> + /** 0x03: WAITVOL vX+YYYY
>> + Waits until the volume handling code has reached the line
>> + specified by vX+YYYY. The delay can be until song end if
>> + the volume code never reaches the specified line. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_WAITVOL 0x03
>> +
>> + /** 0x04: WAITPAN vX+YYYY
>> + Waits until the panning handling code has reached the line
>> + specified by vX+YYYY. The delay can be until song end if
>> + the panning code never reaches the specified line. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_WAITPAN 0x04
>> +
>> + /** 0x05: WAITSLD vX+YYYY
>> + Waits until the slide handling code has reached the line
>> + specified by vX+YYYY. The delay can be until song end if
>> + the slide code never reaches the specified line. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_WAITSLD 0x05
>> +
>> + /** 0x06: WAITSPC vX+YYYY
>> + Waits until the special handling code has reached the line
>> + specified by vX+YYYY. The delay can be until song end if
>> + the special code never reaches the specified line. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_WAITSPC 0x06
>> +
>> + /** 0x07: JUMP vX+YYYY
>> + Jumps to the target line number within the same synth
>> + code specified by vX+YYYY. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_JUMP 0x07
>> +
>> + /** 0x08: JUMPEQ vX+YYYY
>> + Jumps to the target line number within the same synth
>> + code specified by vX+YYYY if the zero flag of the
>> + condition variable is set otherwise do nothing. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_JUMPEQ 0x08
>> +
>> + /** 0x09: JUMPNE vX+YYYY
>> + Jumps to the target line number within the same synth
>> + code specified by vX+YYYY if the zero flag of the
>> + condition variable is cleared otherwise do nothing. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_JUMPNE 0x09
>> +
>> + /** 0x0A: JUMPPL vX+YYYY
>> + Jumps to the target line number within the same synth
>> + code specified by vX+YYYY if the negative flag of the
>> + condition variable is cleared otherwise do nothing. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_JUMPPL 0x0A
>> +
>> + /** 0x0B: JUMPMI vX+YYYY
>> + Jumps to the target line number within the same synth
>> + code specified by vX+YYYY if the negative flag of the
>> + condition variable is set otherwise do nothing. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_JUMPMI 0x0B
>> +
>> + /** 0x0C: JUMPLT vX+YYYY
>> + Jumps to the target line number within the same synth
>> + code specified by vX+YYYY if either the negative or
>> + the overflow flag of the condition variable are set,
>> + like a signed less than comparision, otherwise will
>> + do nothing. */
>> +#define AVSEQ_SYNTH_CODE_INSTRUCTION_JUMPLT 0x0C
>> +
>>
>
> that all looks like it should use a enum
>
Will do this in the following days, changing this will require huge
changes in player.c
>
> [...]
>
>> + /** Initial status of volume variable condition status register. */
>> + uint16_t vol_cond_var;
>> +#define AVSEQ_SYNTH_VOL_COND_VAR_CARRY 0x01 ///< Carry (C) bit for volume condition variable
>> +#define AVSEQ_SYNTH_VOL_COND_VAR_OVERFLOW 0x02 ///< Overflow (V) bit for volume condition variable
>> +#define AVSEQ_SYNTH_VOL_COND_VAR_ZERO 0x04 ///< Zero (Z) bit for volume condition variable
>> +#define AVSEQ_SYNTH_VOL_COND_VAR_NEGATIVE 0x08 ///< Negative (N) bit for volume condition variable
>> +#define AVSEQ_SYNTH_VOL_COND_VAR_EXTEND 0x10 ///< Extend (X) bit for volume condition variable
>> +
>> + /** Initial status of panning variable condition status register. */
>> + uint16_t pan_cond_var;
>> +#define AVSEQ_SYNTH_PAN_COND_VAR_CARRY 0x01 ///< Carry (C) bit for panning condition variable
>> +#define AVSEQ_SYNTH_PAN_COND_VAR_OVERFLOW 0x02 ///< Overflow (V) bit for panning condition variable
>> +#define AVSEQ_SYNTH_PAN_COND_VAR_ZERO 0x04 ///< Zero (Z) bit for panning condition variable
>> +#define AVSEQ_SYNTH_PAN_COND_VAR_NEGATIVE 0x08 ///< Negative (N) bit for panning condition variable
>> +#define AVSEQ_SYNTH_PAN_COND_VAR_EXTEND 0x10 ///< Extend (X) bit for panning condition variable
>> +
>> + /** Initial status of slide variable condition status register. */
>> + uint16_t slide_cond_var;
>> +#define AVSEQ_SYNTH_SLD_COND_VAR_CARRY 0x01 ///< Carry (C) bit for slide condition variable
>> +#define AVSEQ_SYNTH_SLD_COND_VAR_OVERFLOW 0x02 ///< Overflow (V) bit for slide condition variable
>> +#define AVSEQ_SYNTH_SLD_COND_VAR_ZERO 0x04 ///< Zero (Z) bit for slide condition variable
>> +#define AVSEQ_SYNTH_SLD_COND_VAR_NEGATIVE 0x08 ///< Negative (N) bit for slide condition variable
>> +#define AVSEQ_SYNTH_SLD_COND_VAR_EXTEND 0x10 ///< Extend (X) bit for slide condition variable
>> +
>> + /** Initial status of special variable condition status register. */
>> + uint16_t special_cond_var;
>> +#define AVSEQ_SYNTH_SPC_COND_VAR_CARRY 0x01 ///< Carry (C) bit for special condition variable
>> +#define AVSEQ_SYNTH_SPC_COND_VAR_OVERFLOW 0x02 ///< Overflow (V) bit for special condition variable
>> +#define AVSEQ_SYNTH_SPC_COND_VAR_ZERO 0x04 ///< Zero (Z) bit for special condition variable
>> +#define AVSEQ_SYNTH_SPC_COND_VAR_NEGATIVE 0x08 ///< Negative (N) bit for special condition variable
>> +#define AVSEQ_SYNTH_SPC_COND_VAR_EXTEND 0x10 ///< Extend (X) bit for special condition variable
>>
>
> these defines are repeated, i guess that could be avoided
> the same seems true for other flags in this file
>
Fixed.
> also there are a huge number of large headers, is all this needed as public
> interface between file reading - playing - editing - writing?
>
Yes, of course. A tracker should give possibility to edit all fields
which change module data. Please note that the synth sound assembler was
planned from me for end-users also, so they can fully customize their
synthesized sounds.
--
Best regards,
:-) Basty/CDGS (-:
-------------- next part --------------
A non-text attachment was scrubbed...
Name: synth.h_20100711.patch
Type: text/x-patch
Size: 13360 bytes
Desc: not available
URL: <http://lists.mplayerhq.hu/pipermail/ffmpeg-soc/attachments/20100711/436fb76a/attachment.bin>
More information about the FFmpeg-soc
mailing list