[FFmpeg-devel] [PATCH] libavformat: IEC61937_EAC3 decoding support

[Denis Shulyaka]

Hi,

How do I ask someone to review the patch? I am concerned if I submitted the
PR correctly.

Best regards,
Denis Shulyaka

вт, 16 мар. 2021 г. в 20:59, Denis Shulyaka <shulyaka at gmail.com>:

> This patch adds support to decode IEC61937_EAC3 (aka dolby digital plus).
>
> Signed-off-by: Denis Shulyaka <Shulyaka at gmail.com>
> ---
>  libavformat/spdifdec.c | 47 ++++++++++++++++++++++++++++++++++--------
>  1 file changed, 38 insertions(+), 9 deletions(-)
>
> diff --git a/libavformat/spdifdec.c b/libavformat/spdifdec.c
> index 1808fa9d65..58841e7775 100644
> --- a/libavformat/spdifdec.c
> +++ b/libavformat/spdifdec.c
> @@ -93,6 +93,10 @@ static int spdif_get_offset_and_codec(AVFormatContext
> *s,
>          *offset = 8192;
>          *codec = AV_CODEC_ID_DTS;
>          break;
> +    case IEC61937_EAC3:
> +        *offset = AC3_FRAME_SIZE << 4;
> +        *codec = AV_CODEC_ID_EAC3;
> +        break;
>      default:
>          if (s) { /* be silent during a probe */
>              avpriv_request_sample(s, "Data type 0x%04x in IEC 61937",
> @@ -103,9 +107,34 @@ static int spdif_get_offset_and_codec(AVFormatContext
> *s,
>      return 0;
>  }
>
> -/* Largest offset between bursts we currently handle, i.e. AAC with
> -   samples = 4096 */
> -#define SPDIF_MAX_OFFSET 16384
> +static int spdif_read_burst_payload_length(AVFormatContext *s,
> +                                           enum IEC61937DataType
> data_type)
> +{
> +    AVIOContext *pb = s->pb;
> +    int pkt_size_bits, pkt_size_bytes;
> +
> +    switch (data_type & 0xff) {
> +    case IEC61937_EAC3:
> +        pkt_size_bytes = avio_rl16(pb);
> +
> +        if (pkt_size_bytes % 2)
> +            avpriv_request_sample(s, "Packet not ending at a 16-bit
> boundary");
> +
> +        return FFALIGN(pkt_size_bytes, 2);
> +        break;
> +    default:
> +        pkt_size_bits = avio_rl16(pb);
> +
> +        if (pkt_size_bits % 16)
> +            avpriv_request_sample(s, "Packet not ending at a 16-bit
> boundary");
> +
> +        return FFALIGN(pkt_size_bits, 16) >> 3;
> +    }
> +    return 0;
> +}
> +
> +/* Largest offset between bursts we currently handle, i.e. E-AC-3 */
> +#define SPDIF_MAX_OFFSET 24576
>
>  static int spdif_probe(const AVProbeData *p)
>  {
> @@ -140,7 +169,7 @@ int ff_spdif_probe(const uint8_t *p_buf, int buf_size,
> enum AVCodecID *codec)
>                  break;
>
>              /* continue probing to find more sync codes */
> -            probe_end = FFMIN(buf + SPDIF_MAX_OFFSET, p_buf + buf_size -
> 1);
> +            probe_end = FFMIN(buf + SPDIF_MAX_OFFSET + 1, p_buf +
> buf_size - 1);
>
>              /* skip directly to the next sync code */
>              if (!spdif_get_offset_and_codec(NULL, (buf[2] << 8) | buf[1],
> @@ -176,7 +205,7 @@ int ff_spdif_read_packet(AVFormatContext *s, AVPacket
> *pkt)
>      enum IEC61937DataType data_type;
>      enum AVCodecID codec_id;
>      uint32_t state = 0;
> -    int pkt_size_bits, offset, ret;
> +    int pkt_size, offset, ret;
>
>      while (state != (AV_BSWAP16C(SYNCWORD1) << 16 |
> AV_BSWAP16C(SYNCWORD2))) {
>          state = (state << 8) | avio_r8(pb);
> @@ -185,12 +214,12 @@ int ff_spdif_read_packet(AVFormatContext *s,
> AVPacket *pkt)
>      }
>
>      data_type = avio_rl16(pb);
> -    pkt_size_bits = avio_rl16(pb);
> +    pkt_size = spdif_read_burst_payload_length(s, data_type);
>
> -    if (pkt_size_bits % 16)
> -        avpriv_request_sample(s, "Packet not ending at a 16-bit
> boundary");
> +    if (!pkt_size)
> +        return AVERROR_BUG;
>
> -    ret = av_new_packet(pkt, FFALIGN(pkt_size_bits, 16) >> 3);
> +    ret = av_new_packet(pkt, pkt_size);
>      if (ret)
>          return ret;
>
> --
> 2.30.2
>
>

-- 
Best regards,
Denis Shulyaka