[FFmpeg-devel] [PATCH V7] avcodec/libvpxenc: add ROI-based encoding support for VP8/VP9
Guo, Yejun
yejun.guo at intel.com
Wed Sep 11 04:02:25 EEST 2019
please ignore this patch since the version number in libavcodec/version.h has been changed,
and so conflicts, I'll rebase it and send out a new V8 patch.
> -----Original Message-----
> From: Guo, Yejun
> Sent: Thursday, August 29, 2019 10:35 AM
> To: ffmpeg-devel at ffmpeg.org
> Cc: Guo, Yejun <yejun.guo at intel.com>
> Subject: [PATCH V7] avcodec/libvpxenc: add ROI-based encoding support for
> VP8/VP9
>
> example command line to verify it:
> ./ffmpeg -i input.stream -vf addroi=0:0:iw/3:ih/3:-0.8 -c:v libvpx -b:v 2M
> tmp.webm
>
> Signed-off-by: Guo, Yejun <yejun.guo at intel.com>
> ---
> libavcodec/libvpxenc.c | 189
> +++++++++++++++++++++++++++++++++++++++++++++++++
> libavcodec/version.h | 2 +-
> 2 files changed, 190 insertions(+), 1 deletion(-)
>
> diff --git a/libavcodec/libvpxenc.c b/libavcodec/libvpxenc.c
> index feb52ea..dfee5cc 100644
> --- a/libavcodec/libvpxenc.c
> +++ b/libavcodec/libvpxenc.c
> @@ -116,6 +116,9 @@ typedef struct VPxEncoderContext {
> int tune_content;
> int corpus_complexity;
> int tpl_model;
> + // If the driver does not support ROI then warn the first time we
> + // encounter a frame with ROI side data.
> + int roi_warned;
> } VPxContext;
>
> /** String mappings for enum vp8e_enc_control_id */
> @@ -1057,6 +1060,184 @@ static int queue_frames(AVCodecContext *avctx,
> AVPacket *pkt_out)
> return size;
> }
>
> +static int set_roi_map(AVCodecContext *avctx, const AVFrameSideData *sd,
> int frame_width, int frame_height,
> + vpx_roi_map_t *roi_map, int block_size, int
> segment_cnt)
> +{
> + /* range of vpx_roi_map_t.delta_q[i] is [-63, 63] */
> +#define MAX_DELTA_Q 63
> +
> + const AVRegionOfInterest *roi = NULL;
> + int nb_rois;
> + uint32_t self_size;
> + int segment_id;
> +
> + /* record the mapping from delta_q to "segment id + 1" in
> segment_mapping[].
> + * the range of delta_q is [-MAX_DELTA_Q, MAX_DELTA_Q],
> + * and its corresponding array index is [0, 2 * MAX_DELTA_Q],
> + * and so the length of the mapping array is 2 * MAX_DELTA_Q + 1.
> + * "segment id + 1", so we can say there's no mapping if the value of
> array element is zero.
> + */
> + int segment_mapping[2 * MAX_DELTA_Q + 1] = { 0 };
> +
> + memset(roi_map, 0, sizeof(*roi_map));
> +
> + /* segment id 0 in roi_map is reserved for the areas not covered by
> AVRegionOfInterest.
> + * segment id 0 in roi_map is also for the areas with
> AVRegionOfInterest.qoffset near 0.
> + * (delta_q of segment id 0 is 0).
> + */
> + segment_mapping[MAX_DELTA_Q] = 1;
> + segment_id = 1;
> +
> + roi = (const AVRegionOfInterest*)sd->data;
> + self_size = roi->self_size;
> + if (!self_size || sd->size % self_size != 0) {
> + av_log(avctx, AV_LOG_ERROR, "Invalid
> AVRegionOfInterest.self_size.\n");
> + return AVERROR(EINVAL);
> + }
> + nb_rois = sd->size / self_size;
> +
> + /* This list must be iterated from zero because regions are
> + * defined in order of decreasing importance. So discard less
> + * important areas if they exceed the segment count.
> + */
> + for (int i = 0; i < nb_rois; i++) {
> + int delta_q;
> + int mapping_index;
> +
> + roi = (const AVRegionOfInterest*)(sd->data + self_size * i);
> + if (roi->qoffset.den == 0) {
> + av_log(avctx, AV_LOG_ERROR,
> "AVRegionOfInterest.qoffset.den must not be zero.\n");
> + return AVERROR(EINVAL);
> + }
> +
> + delta_q = (int)(roi->qoffset.num * 1.0f / roi->qoffset.den *
> MAX_DELTA_Q);
> + delta_q = av_clip(delta_q, -MAX_DELTA_Q, MAX_DELTA_Q);
> +
> + mapping_index = delta_q + MAX_DELTA_Q;
> + if (!segment_mapping[mapping_index]) {
> + if (segment_id == segment_cnt) {
> + av_log(avctx, AV_LOG_WARNING,
> + "ROI only supports %d segments (and segment 0
> is reserved for non-ROIs), skipping the left ones.\n",
> + segment_cnt);
> + break;
> + }
> +
> + segment_mapping[mapping_index] = segment_id + 1;
> + roi_map->delta_q[segment_id] = delta_q;
> + segment_id++;
> + }
> + }
> +
> +
> + roi_map->rows = (frame_height + block_size - 1) / block_size;
> + roi_map->cols = (frame_width + block_size - 1) / block_size;
> + roi_map->roi_map = av_mallocz_array(roi_map->rows * roi_map->cols,
> sizeof(*roi_map->roi_map));
> + if (!roi_map->roi_map) {
> + av_log(avctx, AV_LOG_ERROR, "roi_map alloc failed.\n");
> + return AVERROR(ENOMEM);
> + }
> +
> + /* This list must be iterated in reverse, so for the case that
> + * two regions are overlapping, the more important area takes effect.
> + */
> + for (int i = nb_rois - 1; i >= 0; i--) {
> + int delta_q;
> + int mapping_value;
> + int starty, endy, startx, endx;
> +
> + roi = (const AVRegionOfInterest*)(sd->data + self_size * i);
> +
> + starty = av_clip(roi->top / block_size, 0, roi_map->rows);
> + endy = av_clip((roi->bottom + block_size - 1) / block_size, 0,
> roi_map->rows);
> + startx = av_clip(roi->left / block_size, 0, roi_map->cols);
> + endx = av_clip((roi->right + block_size - 1) / block_size, 0,
> roi_map->cols);
> +
> + delta_q = (int)(roi->qoffset.num * 1.0f / roi->qoffset.den *
> MAX_DELTA_Q);
> + delta_q = av_clip(delta_q, -MAX_DELTA_Q, MAX_DELTA_Q);
> +
> + mapping_value = segment_mapping[delta_q + MAX_DELTA_Q];
> + if (mapping_value) {
> + for (int y = starty; y < endy; y++)
> + for (int x = startx; x < endx; x++)
> + roi_map->roi_map[x + y * roi_map->cols] =
> mapping_value - 1;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int vp9_encode_set_roi(AVCodecContext *avctx, int frame_width, int
> frame_height, const AVFrameSideData *sd)
> +{
> + VPxContext *ctx = avctx->priv_data;
> +
> +#ifdef VPX_CTRL_VP9E_SET_ROI_MAP
> + int version = vpx_codec_version();
> + int major = VPX_VERSION_MAJOR(version);
> + int minor = VPX_VERSION_MINOR(version);
> + int patch = VPX_VERSION_PATCH(version);
> +
> + if (major > 1 || (major == 1 && minor > 8) || (major == 1 && minor == 8
> && patch >= 1)) {
> + vpx_roi_map_t roi_map;
> + int segment_cnt = 8;
> + int block_size = 8;
> + int ret;
> +
> + if (ctx->aq_mode > 0 || ctx->cpu_used < 5 || ctx->deadline !=
> VPX_DL_REALTIME) {
> + if (!ctx->roi_warned) {
> + ctx->roi_warned = 1;
> + av_log(avctx, AV_LOG_WARNING, "ROI is only enabled
> when aq_mode is 0, cpu_used >= 5 "
> + "and deadline is
> REALTIME, so skipping ROI.\n");
> + return AVERROR(EINVAL);
> + }
> + }
> +
> + ret = set_roi_map(avctx, sd, frame_width, frame_height, &roi_map,
> block_size, segment_cnt);
> + if (ret) {
> + log_encoder_error(avctx, "Failed to set_roi_map.\n");
> + return ret;
> + }
> +
> + memset(roi_map.ref_frame, -1, sizeof(roi_map.ref_frame));
> +
> + if (vpx_codec_control(&ctx->encoder, VP9E_SET_ROI_MAP,
> &roi_map)) {
> + log_encoder_error(avctx, "Failed to set VP9E_SET_ROI_MAP
> codec control.\n");
> + ret = AVERROR_INVALIDDATA;
> + }
> + av_freep(&roi_map.roi_map);
> + return ret;
> + }
> +#endif
> +
> + if (!ctx->roi_warned) {
> + ctx->roi_warned = 1;
> + av_log(avctx, AV_LOG_WARNING, "ROI is not supported, please
> upgrade libvpx to version >= 1.8.1. "
> + "You may need to rebuild
> ffmpeg.\n");
> + }
> + return 0;
> +}
> +
> +static int vp8_encode_set_roi(AVCodecContext *avctx, int frame_width, int
> frame_height, const AVFrameSideData *sd)
> +{
> + vpx_roi_map_t roi_map;
> + int segment_cnt = 4;
> + int block_size = 16;
> + VPxContext *ctx = avctx->priv_data;
> +
> + int ret = set_roi_map(avctx, sd, frame_width, frame_height, &roi_map,
> block_size, segment_cnt);
> + if (ret) {
> + log_encoder_error(avctx, "Failed to set_roi_map.\n");
> + return ret;
> + }
> +
> + if (vpx_codec_control(&ctx->encoder, VP8E_SET_ROI_MAP, &roi_map)) {
> + log_encoder_error(avctx, "Failed to set VP8E_SET_ROI_MAP codec
> control.\n");
> + ret = AVERROR_INVALIDDATA;
> + }
> +
> + av_freep(&roi_map.roi_map);
> + return ret;
> +}
> +
> static int vpx_encode(AVCodecContext *avctx, AVPacket *pkt,
> const AVFrame *frame, int *got_packet)
> {
> @@ -1068,6 +1249,7 @@ static int vpx_encode(AVCodecContext *avctx,
> AVPacket *pkt,
> vpx_enc_frame_flags_t flags = 0;
>
> if (frame) {
> + const AVFrameSideData *sd = av_frame_get_side_data(frame,
> AV_FRAME_DATA_REGIONS_OF_INTEREST);
> rawimg = &ctx->rawimg;
> rawimg->planes[VPX_PLANE_Y] = frame->data[0];
> rawimg->planes[VPX_PLANE_U] = frame->data[1];
> @@ -1113,6 +1295,13 @@ static int vpx_encode(AVCodecContext *avctx,
> AVPacket *pkt,
> flags |= strtoul(en->value, NULL, 10);
> }
> }
> +
> + if (sd) {
> + if (avctx->codec_id == AV_CODEC_ID_VP8)
> + vp8_encode_set_roi(avctx, frame->width, frame->height,
> sd);
> + else
> + vp9_encode_set_roi(avctx, frame->width, frame->height,
> sd);
> + }
> }
>
> res = vpx_codec_encode(&ctx->encoder, rawimg, timestamp,
> diff --git a/libavcodec/version.h b/libavcodec/version.h
> index cda6dba..6d399a4 100644
> --- a/libavcodec/version.h
> +++ b/libavcodec/version.h
> @@ -29,7 +29,7 @@
>
> #define LIBAVCODEC_VERSION_MAJOR 58
> #define LIBAVCODEC_VERSION_MINOR 55
> -#define LIBAVCODEC_VERSION_MICRO 102
> +#define LIBAVCODEC_VERSION_MICRO 103
>
> #define LIBAVCODEC_VERSION_INT
> AV_VERSION_INT(LIBAVCODEC_VERSION_MAJOR, \
>
> LIBAVCODEC_VERSION_MINOR, \
> --
> 2.7.4
More information about the ffmpeg-devel
mailing list