[FFmpeg-devel] [PATCH] lavc/qsvenc: add Tiles encode support for HEVC

Fu, Linjie linjie.fu at intel.com
Fri Nov 29 08:42:23 EET 2019


> -----Original Message-----
> From: ffmpeg-devel <ffmpeg-devel-bounces at ffmpeg.org> On Behalf Of
> Zhong Li
> Sent: Friday, November 29, 2019 13:13
> To: FFmpeg development discussions and patches <ffmpeg-
> devel at ffmpeg.org>
> Subject: Re: [FFmpeg-devel] [PATCH] lavc/qsvenc: add Tiles encode support
> for HEVC
> 
> Linjie Fu <linjie.fu at intel.com> 于2019年11月26日周二 下午12:04写道:
> >
> > Add -tile_rows and -tile_cols option to specify the number of tile rows
> > and columns for ICL+ (gen 11) platform.
> >
> > A tile must wholly contain all the slices within it. Slices cannot cross
> > tile boundaries. So the slice number would be implicitly resized to the
> > max(nSlice, nTile).
> 
> I would like to the check in the code too, instead of  just commit message.

Thanks, code link in MSDK should have been attached too:
https://github.com/Intel-Media-SDK/MediaSDK/blob/5a84af5fa61823a84f32e4b26d864730a927f48c/_studio/mfx_lib/encode_hw/h265/src/mfx_h265_encode_hw_par.cpp#L503

This is merged in:
https://github.com/Intel-Media-SDK/MediaSDK/commit/f8ba11a5b7d61422b117bec2b5b88e4a22bbd294

> 
> > Example:
> >     ffmpeg -v verbose -hwaccel qsv -init_hw_device qsv=hw
> >     -filter_hw_device hw -f rawvideo -s:v 1920x1080 -i ./input.nv12 -vf
> >     format=nv12,hwupload=extra_hw_frames=64 -c:v hevc_qsv -tile_rows 2
> >     -tile_cols 2 -slices 4 -y output.h265
> >
> > Also dump the actual quantity of encoded tiled rows and columns in run
> > time.
> >
> > Fix the enhancement #8400.
> >
> > Signed-off-by: Linjie Fu <linjie.fu at intel.com>
> > ---
> >  libavcodec/qsvenc.c      | 32 +++++++++++++++++++++++++++++++-
> >  libavcodec/qsvenc.h      |  7 +++++++
> >  libavcodec/qsvenc_hevc.c |  3 +++
> >  3 files changed, 41 insertions(+), 1 deletion(-)
> >
> > diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c
> > index e176d57..64814fc 100644
> > --- a/libavcodec/qsvenc.c
> > +++ b/libavcodec/qsvenc.c
> > @@ -139,6 +139,9 @@ static void dump_video_param(AVCodecContext
> *avctx, QSVEncContext *q,
> >  #if QSV_HAVE_CO3
> >      mfxExtCodingOption3 *co3 = (mfxExtCodingOption3*)coding_opts[2];
> >  #endif
> > +#if QSV_HAVE_EXT_HEVC_TILES
> > +    mfxExtHEVCTiles *exthevctiles = (mfxExtHEVCTiles *)coding_opts[3 +
> QSV_HAVE_CO_VPS];
> 
> Should change QSV_HAVE_CO_VPS to QSV_HAVE_EXT_HEVC_TILES?

There is possibility(MSDK version between 1.13 and 1.17) that MSDK has
MFX_EXTBUFF_HEVC_TILES buffer but has no MFX_EXT_BUFF_CODING_OPTION_VPS
buffer.

ext_buffers[]:
BUF_CO | BUF_CO2 | BUF_CO3 | BUF_VPS | BUF_TILE |...

Hence I'd like to check QSV_HAVE_CO_VPS to get the exact address of BUF_TILE
to dump the truly set values.

> 
> > +#endif
> >
> >      av_log(avctx, AV_LOG_VERBOSE, "profile: %s; level: %"PRIu16"\n",
> >             print_profile(info->CodecProfile), info->CodecLevel);
> > @@ -204,6 +207,12 @@ static void dump_video_param(AVCodecContext
> *avctx, QSVEncContext *q,
> >      av_log(avctx, AV_LOG_VERBOSE, "RateDistortionOpt: %s\n",
> >             print_threestate(co->RateDistortionOpt));
> >
> > +#if QSV_HAVE_EXT_HEVC_TILES
> > +    if (avctx->codec_id == AV_CODEC_ID_HEVC)
> > +        av_log(avctx, AV_LOG_VERBOSE, "NumTileColumns: %"PRIu16";
> NumTileRows: %"PRIu16"\n",
> > +               exthevctiles->NumTileColumns, exthevctiles->NumTileRows);
> > +#endif
> > +
> >  #if QSV_HAVE_CO2
> >      av_log(avctx, AV_LOG_VERBOSE,
> >             "RecoveryPointSEI: %s IntRefType: %"PRIu16";
> IntRefCycleSize: %"PRIu16"; IntRefQPDelta: %"PRId16"\n",
> > @@ -771,6 +780,16 @@ FF_ENABLE_DEPRECATION_WARNINGS
> >      }
> >  #endif
> >
> > +#if QSV_HAVE_EXT_HEVC_TILES
> > +    if (avctx->codec_id == AV_CODEC_ID_HEVC) {
> > +        q->exthevctiles.Header.BufferId = MFX_EXTBUFF_HEVC_TILES;
> > +        q->exthevctiles.Header.BufferSz = sizeof(q->exthevctiles);
> > +        q->exthevctiles.NumTileColumns  = q->tile_cols;
> > +        q->exthevctiles.NumTileRows     = q->tile_rows;
> > +        q->extparam_internal[q->nb_extparam_internal++] = (mfxExtBuffer
> *)&q->exthevctiles;
> > +    }
> > +#endif
> > +
> >      if (!check_enc_param(avctx,q)) {
> >          av_log(avctx, AV_LOG_ERROR,
> >                 "some encoding parameters are not supported by the QSV "
> > @@ -887,7 +906,14 @@ static int
> qsv_retrieve_enc_params(AVCodecContext *avctx, QSVEncContext *q)
> >      };
> >  #endif
> >
> > -    mfxExtBuffer *ext_buffers[2 + QSV_HAVE_CO2 + QSV_HAVE_CO3 +
> QSV_HAVE_CO_VPS];
> > +#if QSV_HAVE_EXT_HEVC_TILES
> > +    mfxExtHEVCTiles hevc_tile_buf = {
> > +         .Header.BufferId = MFX_EXTBUFF_HEVC_TILES,
> > +         .Header.BufferSz = sizeof(hevc_tile_buf),
> > +    };
> > +#endif
> > +
> > +    mfxExtBuffer *ext_buffers[2 + QSV_HAVE_CO2 + QSV_HAVE_CO3 +
> QSV_HAVE_CO_VPS + QSV_HAVE_EXT_HEVC_TILES];
> >
> >      int need_pps = avctx->codec_id != AV_CODEC_ID_MPEG2VIDEO;
> >      int ret, ext_buf_num = 0, extradata_offset = 0;
> > @@ -905,6 +931,10 @@ static int
> qsv_retrieve_enc_params(AVCodecContext *avctx, QSVEncContext *q)
> >      if (q->hevc_vps)
> >          ext_buffers[ext_buf_num++] = (mfxExtBuffer*)&extradata_vps;
> >  #endif
> > +#if QSV_HAVE_EXT_HEVC_TILES
> > +    if (avctx->codec_id == AV_CODEC_ID_HEVC)
> > +        ext_buffers[ext_buf_num++] = (mfxExtBuffer*)&hevc_tile_buf;
> > +#endif
> >
> >      q->param.ExtParam    = ext_buffers;
> >      q->param.NumExtParam = ext_buf_num;
> > diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h
> > index ee35582..6609171 100644
> > --- a/libavcodec/qsvenc.h
> > +++ b/libavcodec/qsvenc.h
> > @@ -38,6 +38,7 @@
> >  #define QSV_HAVE_CO3 QSV_VERSION_ATLEAST(1, 11)
> >  #define QSV_HAVE_CO_VPS  QSV_VERSION_ATLEAST(1, 17)
> >
> > +#define QSV_HAVE_EXT_HEVC_TILES QSV_VERSION_ATLEAST(1, 13)
> >  #define QSV_HAVE_EXT_VP9_PARAM QSV_VERSION_ATLEAST(1, 26)
> >
> >  #define QSV_HAVE_TRELLIS QSV_VERSION_ATLEAST(1, 8)
> > @@ -124,6 +125,9 @@ typedef struct QSVEncContext {
> >      mfxExtMultiFrameParam   extmfp;
> >      mfxExtMultiFrameControl extmfc;
> >  #endif
> > +#if QSV_HAVE_EXT_HEVC_TILES
> > +    mfxExtHEVCTiles exthevctiles;
> > +#endif
> >  #if QSV_HAVE_EXT_VP9_PARAM
> >      mfxExtVP9Param  extvp9param;
> >  #endif
> > @@ -161,6 +165,9 @@ typedef struct QSVEncContext {
> >      int max_frame_size;
> >      int max_slice_size;
> >
> > +    int tile_cols;
> > +    int tile_rows;
> > +
> >      int aud;
> >
> >      int single_sei_nal_unit;
> > diff --git a/libavcodec/qsvenc_hevc.c b/libavcodec/qsvenc_hevc.c
> > index da64b4c..27e2232 100644
> > --- a/libavcodec/qsvenc_hevc.c
> > +++ b/libavcodec/qsvenc_hevc.c
> > @@ -243,6 +243,9 @@ static const AVOption options[] = {
> >
> >      { "gpb", "1: GPB (generalized P/B frame); 0: regular P frame",
> OFFSET(qsv.gpb), AV_OPT_TYPE_BOOL, { .i64 = 1 }, 0, 1, VE},
> >
> > +    { "tile_cols",  "Number of columns for tiled encoding",
> OFFSET(qsv.tile_cols),    AV_OPT_TYPE_INT, { .i64 = 0 }, 0, UINT16_MAX, VE },
> 
> should better to keep consist with other codecs such as vp9/av1 to set
> the name as tile_columns.
> 
> And I note the value is log2 in these codecs.

Yes, I've noticed the name and values in log2 formats. 
BTW, MSDK allows Tile structures (such as 3x3 Tiles) instead of only 2^.. Tiles,
would it be better to use log2 format to set the rows/columns?

> > +    { "tile_rows",  "Number of rows for tiled encoding",
> OFFSET(qsv.tile_rows),    AV_OPT_TYPE_INT, { .i64 = 0 }, 0, UINT16_MAX, VE },
> > +
> >      { NULL },
> >  };
> >
> > --
> > 2.7.4
> 
> One problem is that I have no ICL to test the patch.

Um...
It's true that's a problem.

Thanks,

- linjie


More information about the ffmpeg-devel mailing list