[FFmpeg-devel] [PATCH 2/7] hwcontext_vaapi: Add support for legacy DRM mapping
Rostislav Pehlivanov
atomnuker at gmail.com
Mon Mar 12 02:01:36 EET 2018
On 11 March 2018 at 22:41, Mark Thompson <sw at jkqxz.net> wrote:
> The old vaAcquireBufferHandle() API works in fewer cases and provides
> less information than the current vaExportSurfaceHandle(), but it exists
> on older versions and is already used by the OpenCL code. This probably
> doesn't have much use directly, but it will be used to replace the ad-hoc
> OpenCL code in a following patch.
> ---
> libavutil/hwcontext_vaapi.c | 191 ++++++++++++++++++++++++++++++
> +++++++++++---
> 1 file changed, 179 insertions(+), 12 deletions(-)
>
> diff --git a/libavutil/hwcontext_vaapi.c b/libavutil/hwcontext_vaapi.c
> index 99f76b9169..15f1c4d1c0 100644
> --- a/libavutil/hwcontext_vaapi.c
> +++ b/libavutil/hwcontext_vaapi.c
> @@ -1073,8 +1073,9 @@ static int vaapi_map_from_drm(AVHWFramesContext
> *src_fc, AVFrame *dst,
> return 0;
> }
>
> -static void vaapi_unmap_to_drm(AVHWFramesContext *dst_fc,
> - HWMapDescriptor *hwmap)
> +#if VA_CHECK_VERSION(1, 1, 0)
> +static void vaapi_unmap_to_drm_esh(AVHWFramesContext *hwfc,
> + HWMapDescriptor *hwmap)
> {
> AVDRMFrameDescriptor *drm_desc = hwmap->priv;
> int i;
> @@ -1085,10 +1086,9 @@ static void vaapi_unmap_to_drm(AVHWFramesContext
> *dst_fc,
> av_freep(&drm_desc);
> }
>
> -static int vaapi_map_to_drm(AVHWFramesContext *hwfc, AVFrame *dst,
> - const AVFrame *src, int flags)
> +static int vaapi_map_to_drm_esh(AVHWFramesContext *hwfc, AVFrame *dst,
> + const AVFrame *src, int flags)
> {
> -#if VA_CHECK_VERSION(1, 1, 0)
> AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
> VASurfaceID surface_id;
> VAStatus vas;
> @@ -1140,7 +1140,7 @@ static int vaapi_map_to_drm(AVHWFramesContext
> *hwfc, AVFrame *dst,
> }
>
> err = ff_hwframe_map_create(src->hw_frames_ctx, dst, src,
> - &vaapi_unmap_to_drm, drm_desc);
> + &vaapi_unmap_to_drm_esh, drm_desc);
> if (err < 0)
> goto fail;
>
> @@ -1155,15 +1155,182 @@ fail:
> close(va_desc.objects[i].fd);
> av_freep(&drm_desc);
> return err;
> -#else
> - // Older versions without vaExportSurfaceHandle() are not supported -
> - // in theory this is possible with a combination of vaDeriveImage()
> - // and vaAcquireBufferHandle(), but it doesn't carry enough metadata
> - // to actually use the result in a generic way.
> - return AVERROR(ENOSYS);
> +}
> #endif
> +
> +typedef struct VAAPIDRMImageBufferMapping {
> + VAImage image;
> + VABufferInfo buffer_info;
> +
> + AVDRMFrameDescriptor drm_desc;
> +} VAAPIDRMImageBufferMapping;
> +
> +static void vaapi_unmap_to_drm_abh(AVHWFramesContext *hwfc,
> + HWMapDescriptor *hwmap)
> +{
> + AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
> + VAAPIDRMImageBufferMapping *mapping = hwmap->priv;
> + VASurfaceID surface_id;
> + VAStatus vas;
> +
> + surface_id = (VASurfaceID)(uintptr_t)hwmap->source->data[3];
> + av_log(hwfc, AV_LOG_DEBUG, "Unmap VAAPI surface %#x from DRM.\n",
> + surface_id);
> +
> + // DRM PRIME file descriptors are closed by vaReleaseBufferHandle(),
> + // so we shouldn't close them separately.
> +
> + vas = vaReleaseBufferHandle(hwctx->display, mapping->image.buf);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(hwfc, AV_LOG_ERROR, "Failed to release buffer "
> + "handle of image %#x (derived from surface %#x): "
> + "%d (%s).\n", mapping->image.buf, surface_id,
> + vas, vaErrorStr(vas));
> + }
> +
> + vas = vaDestroyImage(hwctx->display, mapping->image.image_id);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(hwfc, AV_LOG_ERROR, "Failed to destroy image "
> + "derived from surface %#x: %d (%s).\n",
> + surface_id, vas, vaErrorStr(vas));
> + }
> +
> + av_free(mapping);
> }
> +
> +static int vaapi_map_to_drm_abh(AVHWFramesContext *hwfc, AVFrame *dst,
> + const AVFrame *src, int flags)
> +{
> + AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
> + VAAPIDRMImageBufferMapping *mapping = NULL;
> + VASurfaceID surface_id;
> + VAStatus vas;
> + int err, i, p;
> +
> + surface_id = (VASurfaceID)(uintptr_t)src->data[3];
> + av_log(hwfc, AV_LOG_DEBUG, "Map VAAPI surface %#x to DRM.\n",
> + surface_id);
> +
> + mapping = av_mallocz(sizeof(*mapping));
> + if (!mapping)
> + return AVERROR(ENOMEM);
> +
> + vas = vaDeriveImage(hwctx->display, surface_id,
> + &mapping->image);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(hwfc, AV_LOG_ERROR, "Failed to derive image from "
> + "surface %#x: %d (%s).\n",
> + surface_id, vas, vaErrorStr(vas));
> + err = AVERROR(EIO);
> + goto fail;
> + }
> +
> + for (i = 0; i < FF_ARRAY_ELEMS(vaapi_drm_format_map); i++) {
> + if (vaapi_drm_format_map[i].va_fourcc ==
> + mapping->image.format.fourcc)
> + break;
> + }
> + if (i >= FF_ARRAY_ELEMS(vaapi_drm_format_map)) {
> + av_log(hwfc, AV_LOG_ERROR, "No matching DRM format for "
> + "VAAPI format %#x.\n", mapping->image.format.fourcc);
> + err = AVERROR(EINVAL);
> + goto fail_derived;
> + }
> +
> + mapping->buffer_info.mem_type =
> + VA_SURFACE_ATTRIB_MEM_TYPE_DRM_PRIME;
> +
> + mapping->drm_desc.nb_layers =
> + vaapi_drm_format_map[i].nb_layer_formats;
> + if (mapping->drm_desc.nb_layers > 1) {
> + if (mapping->drm_desc.nb_layers != mapping->image.num_planes) {
> + av_log(hwfc, AV_LOG_ERROR, "Image properties do not match "
> + "expected format: got %d planes, but expected %d.\n",
> + mapping->image.num_planes,
> mapping->drm_desc.nb_layers);
> + err = AVERROR(EINVAL);
> + goto fail_derived;
> + }
> +
> + for(p = 0; p < mapping->drm_desc.nb_layers; p++) {
> + mapping->drm_desc.layers[p] = (AVDRMLayerDescriptor) {
> + .format = vaapi_drm_format_map[i].layer_formats[p],
> + .nb_planes = 1,
> + .planes[0] = {
> + .object_index = 0,
> + .offset = mapping->image.offsets[p],
> + .pitch = mapping->image.pitches[p],
> + },
> + };
> + }
> + } else {
> + mapping->drm_desc.layers[0].format =
> + vaapi_drm_format_map[i].layer_formats[0];
> + mapping->drm_desc.layers[0].nb_planes =
> mapping->image.num_planes;
> + for (p = 0; p < mapping->image.num_planes; p++) {
> + mapping->drm_desc.layers[0].planes[p] =
> (AVDRMPlaneDescriptor) {
> + .object_index = 0,
> + .offset = mapping->image.offsets[p],
> + .pitch = mapping->image.pitches[p],
> + };
> + }
> + }
> +
> + vas = vaAcquireBufferHandle(hwctx->display, mapping->image.buf,
> + &mapping->buffer_info);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(hwfc, AV_LOG_ERROR, "Failed to get buffer "
> + "handle from image %#x (derived from surface %#x): "
> + "%d (%s).\n", mapping->image.buf, surface_id,
> + vas, vaErrorStr(vas));
> + err = AVERROR(EIO);
> + goto fail_derived;
> + }
> +
> + av_log(hwfc, AV_LOG_DEBUG, "DRM PRIME fd is %ld.\n",
> + mapping->buffer_info.handle);
> +
> + mapping->drm_desc.nb_objects = 1;
> + mapping->drm_desc.objects[0] = (AVDRMObjectDescriptor) {
> + .fd = mapping->buffer_info.handle,
> + .size = mapping->image.data_size,
> + // There is no way to get the format modifier with this API.
> + .format_modifier = DRM_FORMAT_MOD_NONE,
> + };
> +
> + err = ff_hwframe_map_create(src->hw_frames_ctx,
> + dst, src, &vaapi_unmap_to_drm_abh,
> + mapping);
> + if (err < 0)
> + goto fail_mapped;
> +
> + dst->data[0] = (uint8_t*)&mapping->drm_desc;
> + dst->width = src->width;
> + dst->height = src->height;
> +
> + return 0;
> +
> +fail_mapped:
> + vaReleaseBufferHandle(hwctx->display, mapping->image.buf);
> +fail_derived:
> + vaDestroyImage(hwctx->display, mapping->image.image_id);
> +fail:
> + av_freep(&mapping);
> + return err;
> +}
> +
> +static int vaapi_map_to_drm(AVHWFramesContext *hwfc, AVFrame *dst,
> + const AVFrame *src, int flags)
> +{
> +#if VA_CHECK_VERSION(1, 1, 0)
> + int err;
> + err = vaapi_map_to_drm_esh(hwfc, dst, src, flags);
> + if (err != AVERROR(ENOSYS))
> + return err;
> #endif
> + return vaapi_map_to_drm_abh(hwfc, dst, src, flags);
> +}
> +
> +#endif /* CONFIG_LIBDRM */
>
> static int vaapi_map_to(AVHWFramesContext *hwfc, AVFrame *dst,
> const AVFrame *src, int flags)
> --
> 2.16.1
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel at ffmpeg.org
> http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
Why? libva 1.1.0 is 6 years old now. It doesn't make sense to have 2 pieces
of code to do the same thing.
More information about the ffmpeg-devel
mailing list