[FFmpeg-devel] [PATCH 13/26] vaapi_encode: Add quality level to common options
Xiang, Haihao
haihao.xiang at intel.com
Thu Apr 26 08:34:04 EEST 2018
On Sun, 2018-04-22 at 16:29 +0100, Mark Thompson wrote:
> This was previously accessible only via AVCodecContext.compression_level
> for all encoders except H.264 where it was also a private option. This
> makes it an explicit option everywhere.
> ---
> libavcodec/vaapi_encode.c | 87 ++++++++++++++++++++++++++---------------
> -
> libavcodec/vaapi_encode.h | 8 ++++
> libavcodec/vaapi_encode_h264.c | 6 ---
> 3 files changed, 62 insertions(+), 39 deletions(-)
>
> diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
> index 9c39bcdeff..a5eb072843 100644
> --- a/libavcodec/vaapi_encode.c
> +++ b/libavcodec/vaapi_encode.c
> @@ -1381,6 +1381,52 @@ static av_cold int
> vaapi_encode_init_rate_control(AVCodecContext *avctx)
> return 0;
> }
>
> +static av_cold int vaapi_encode_init_quality(AVCodecContext *avctx)
> +{
> +#if VA_CHECK_VERSION(0, 36, 0)
> + VAAPIEncodeContext *ctx = avctx->priv_data;
> + VAStatus vas;
> + VAConfigAttrib attr = { VAConfigAttribEncQualityRange };
> +
> + vas = vaGetConfigAttributes(ctx->hwctx->display,
> + ctx->va_profile,
> + ctx->va_entrypoint,
> + &attr, 1);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(avctx, AV_LOG_ERROR, "Failed to query quality "
> + "config attribute: %d (%s).\n", vas, vaErrorStr(vas));
> + return AVERROR_EXTERNAL;
> + }
> +
> + if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
> + if (ctx->quality != 0) {
> + av_log(avctx, AV_LOG_WARNING, "Quality attribute is not "
> + "supported: will use default quality level.\n");
> + }
> + } else {
> + if (ctx->quality > attr.value) {
> + av_log(avctx, AV_LOG_WARNING, "Invalid quality level: "
> + "valid range is 0-%d, using %d.\n",
> + attr.value, attr.value);
> + ctx->quality = attr.value;
> + }
> +
> + ctx->quality_params.misc.type =
> + VAEncMiscParameterTypeQualityLevel;
> + ctx->quality_params.quality.quality_level =
> + ctx->quality;
> +
> + vaapi_encode_add_global_param(avctx, &ctx->quality_params.misc,
> + sizeof(ctx->quality_params));
> + }
> +#else
> + av_log(avctx, AV_LOG_WARNING, "The encode quality option is "
> + "not supported with this VAAPI version.\n");
> +#endif
> +
> + return 0;
> +}
> +
> static void vaapi_encode_free_output_buffer(void *opaque,
> uint8_t *data)
> {
> @@ -1562,6 +1608,14 @@ av_cold int ff_vaapi_encode_init(AVCodecContext *avctx)
> if (err < 0)
> goto fail;
>
> + if (!ctx->quality)
> + ctx->quality = avctx->compression_level;
0 means the default quality level in use in VAAPI, so does it make sense to
assign avctx->compression_level which is not FF_COMPRESSION_DEFAULT to ctx-
>quality?
> + if (ctx->quality >= 0) {
> + err = vaapi_encode_init_quality(avctx);
> + if (err < 0)
> + goto fail;
> + }
> +
> vas = vaCreateConfig(ctx->hwctx->display,
> ctx->va_profile, ctx->va_entrypoint,
> ctx->config_attributes, ctx->nb_config_attributes,
> @@ -1611,39 +1665,6 @@ av_cold int ff_vaapi_encode_init(AVCodecContext *avctx)
> goto fail;
> }
>
> - if (avctx->compression_level >= 0) {
> -#if VA_CHECK_VERSION(0, 36, 0)
> - VAConfigAttrib attr = { VAConfigAttribEncQualityRange };
> -
> - vas = vaGetConfigAttributes(ctx->hwctx->display,
> - ctx->va_profile,
> - ctx->va_entrypoint,
> - &attr, 1);
> - if (vas != VA_STATUS_SUCCESS) {
> - av_log(avctx, AV_LOG_WARNING, "Failed to query quality "
> - "attribute: will use default compression level.\n");
> - } else {
> - if (avctx->compression_level > attr.value) {
> - av_log(avctx, AV_LOG_WARNING, "Invalid compression "
> - "level: valid range is 0-%d, using %d.\n",
> - attr.value, attr.value);
> - avctx->compression_level = attr.value;
> - }
> -
> - ctx->quality_params.misc.type =
> - VAEncMiscParameterTypeQualityLevel;
> - ctx->quality_params.quality.quality_level =
> - avctx->compression_level;
> -
> - vaapi_encode_add_global_param(avctx, &ctx->quality_params.misc,
> - sizeof(ctx->quality_params));
> - }
> -#else
> - av_log(avctx, AV_LOG_WARNING, "The encode compression level "
> - "option is not supported with this VAAPI version.\n");
> -#endif
> - }
> -
> ctx->input_order = 0;
> ctx->output_delay = avctx->max_b_frames;
> ctx->decode_delay = 1;
> diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h
> index 9e0826b30e..35d48eff2f 100644
> --- a/libavcodec/vaapi_encode.h
> +++ b/libavcodec/vaapi_encode.h
> @@ -111,6 +111,10 @@ typedef struct VAAPIEncodeContext {
>
> // Global options.
>
> + // Encoding quality level.
> + // (Also exposed via AVCodecContext.compression_level.)
> + int quality;
> +
AVCodecContext.compression_level just takes effects when quality is 0 in the
current implementation, it would be better to mention this limitation in the
comment.
> // Use low power encoding mode.
> int low_power;
>
> @@ -302,6 +306,10 @@ int ff_vaapi_encode_close(AVCodecContext *avctx);
>
>
> #define VAAPI_ENCODE_COMMON_OPTIONS \
> + { "quality", \
> + "Set encode quality (trades off against speed, higher is faster)", \
> + OFFSET(common.quality), AV_OPT_TYPE_INT, \
> + { .i64 = 0 }, 0, INT_MAX, FLAGS }, \
> { "low_power", \
> "Use low-power encoding mode (only available on some platforms; " \
> "may not support all encoding features)", \
> diff --git a/libavcodec/vaapi_encode_h264.c b/libavcodec/vaapi_encode_h264.c
> index 49dc5229b5..a20cf15c1e 100644
> --- a/libavcodec/vaapi_encode_h264.c
> +++ b/libavcodec/vaapi_encode_h264.c
> @@ -51,7 +51,6 @@ typedef struct VAAPIEncodeH264Context {
>
> // User options.
> int qp;
> - int quality;
> int coder;
> int aud;
> int sei;
> @@ -828,9 +827,6 @@ static av_cold int
> vaapi_encode_h264_configure(AVCodecContext *avctx)
> av_assert0(0 && "Invalid RC mode.");
> }
>
> - if (avctx->compression_level == FF_COMPRESSION_DEFAULT)
> - avctx->compression_level = priv->quality;
> -
> if (priv->sei & SEI_IDENTIFIER) {
> const char *lavc = LIBAVCODEC_IDENT;
> const char *vaapi = VA_VERSION_S;
> @@ -970,8 +966,6 @@ static const AVOption vaapi_encode_h264_options[] = {
>
> { "qp", "Constant QP (for P-frames; scaled by qfactor/qoffset for I/B)",
> OFFSET(qp), AV_OPT_TYPE_INT, { .i64 = 20 }, 0, 52, FLAGS },
> - { "quality", "Set encode quality (trades off against speed, higher is
> faster)",
> - OFFSET(quality), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 8, FLAGS },
> { "coder", "Entropy coder type",
> OFFSET(coder), AV_OPT_TYPE_INT, { .i64 = 1 }, 0, 1, FLAGS, "coder" },
> { "cavlc", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 0 }, INT_MIN,
> INT_MAX, FLAGS, "coder" },
More information about the ffmpeg-devel
mailing list