[FFmpeg-devel] Configure: commit 6dfcbd80ad446ff163b47f2bf432bbf706436ea8 broke my builds
hydra3333 at gmail.com
hydra3333 at gmail.com
Sun Oct 15 02:46:04 EEST 2017
Hello. Per ticket https://trac.ffmpeg.org/ticket/6731 I too am having
trouble cross-compiling ffmpeg.
This is the configure being used
./configure --arch=x86 --target-os=mingw32 --cross-prefix=/home/u/Desktop/ffmpeg-windows-build-helpers-withOpenCL-master/sandbox/cross_compilers/mingw-w64-i686/bin/i686-w64-mingw32-
--pkg-config=pkg-config --pkg-config-flags=--static --enable-gray --enable-version3
--disable-debug --disable-doc --disable-htmlpages --disable-manpages --disable-podpages
--disable-txtpages --disable-w32threads --enable-nvenc --enable-cuda --enable-cuvid
--enable-d3d11va --enable-libsoxr --enable-fontconfig --enable-libass --enable-libbluray
--enable-iconv --enable-libtwolame --enable-libzvbi --enable-libcaca --enable-libmodplug
--extra-libs=-lstdc++ --extra-libs=-lpng --extra-libs=-loleaut32 --enable-libmp3lame
--enable-version3 --enable-zlib --enable-librtmp --enable-libvorbis --enable-libtheora
--enable-libspeex --enable-libopenjpeg --enable-gnutls --enable-libgsm --enable-libfreetype
--enable-libopus --enable-bzlib --enable-libopencore-amrnb --enable-libopencore-amrwb
--enable-libvo-amrwbenc --enable-libvpx --enable-libilbc --enable-libwavpack
--enable-libwebp --enable-libgme --enable-dxva2 --enable-gray --enable-libopenh264
--enable-libmysofa --enable-libflite --enable-lzma --enable-libsnappy --enable-libzimg
--enable-libbs2b --enable-gmp --enable-libfribidi --enable-cross-compile
--enable-pic --extra-libs=-lpsapi --extra-libs=-lspeexdsp --disable-schannel
--extra-cflags=-DLIBTWOLAME_STATIC --extra-cflags=-DMODPLUG_STATIC --extra-cflags=-DCACA_STATIC
--enable-gpl --enable-avisynth --enable-frei0r --enable-filter=frei0r --enable-librubberband
--enable-libvidstab --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid
--enable-libmfx --enable-avresample --enable-libcdio --extra-cflags=-mtune=generic
--extra-cflags=-O3 --enable-static --disable-shared --prefix=/home/u/Desktop/ffmpeg-windows-build-helpers-withOpenCL-master/sandbox/cross_compilers/mingw-w64-i686/i686-w64-mingw32
--enable-nonfree --enable-decklink --enable-libfdk-aac --enable-opencl --enable-runtime-cpudetect
--disable-libx264 --extra-libs=-lpthread --extra-libs=-lcrypt32 --extra-libs=-lstdc++
--extra-libs=-lass --extra-libs=-lfontconfig --extra-libs=-lexpat --extra-libs=-lfribidi
--extra-libs=-lfreetype --extra-libs=-lharfbuzz --extra-libs=-lbz2 --extra-libs=-llzma
--extra-libs=-liconv --extra-libs=-lcdio --extra-libs=-lcdio_paranoia --extra-libs=-lz
--extra-libs=-lm --extra-libs=-lpsapi --extra-libs=-lspeexdsp
And this is a part of my script in which I am adding libraries one by one
once I see what error message appears in each subsequent attempt to build (I
started with a set I saw in another post somewhere).
# 2017.10.14 - START add this for various errors per
https://patchwork.ffmpeg.org/patch/5540/ - removed from being extralibs
being global any more ?
config_options+=" --extra-libs=-lpthread"
config_options+=" --extra-libs=-lcrypt32"
config_options+=" --extra-libs=-lstdc++"
config_options+=" --extra-libs=-lass"
config_options+=" --extra-libs=-lfontconfig"
config_options+=" --extra-libs=-lexpat"
config_options+=" --extra-libs=-lfribidi"
config_options+=" --extra-libs=-lfreetype"
config_options+=" --extra-libs=-lharfbuzz"
config_options+=" --extra-libs=-lpsapi" # dlfcn [frei0r?] requires this,
has no .pc file should put in frei0r.pc? ...
config_options+=" --extra-libs=-lspeexdsp" # libebur :|
config_options+=" --extra-libs=-lbz2"
config_options+=" --extra-libs=-llzma"
config_options+=" --extra-libs=-liconv"
config_options+=" --extra-libs=-lcdio"
config_options+=" --extra-libs=-lcdio_paranoia"
config_options+=" --extra-libs=-lz"
config_options+=" --extra-libs=-lm"
config_options+=" --extra-libs=-lgdi32"
However I'm not quite sure what to do when I see the following errors in
config.log, so advice would be appreciated.
/home/u/Desktop/ffmpeg-windows-build-helpers-withOpenCL-master/sandbox/cross_compilers/mingw-w64-i686/bin/i686-w64-mingw32-gcc
-Wl,--large-address-aware -Wl,--nxcompat,--dynamicbase -Wl,--as-needed -Wl,--pic-executable,-e,_mainCRTStartup
-o /tmp/ffconf.a5swywFH/test.exe
/tmp/ffconf.a5swywFH/test.o -lcdio_paranoia -lcdio_cdda -lcdio -lspeexdsp -lpsapi
-lm -lz -lcdio_paranoia -lcdio -liconv -llzma -lbz2 -lharfbuzz -lfreetype -lfribidi
-lexpat -lfontconfig -lass -lstdc++ -lcrypt32 -lpthread -lspeexdsp -lpsapi
-loleaut32 -lpng -lstdc++
/home/u/Desktop/ffmpeg-windows-build-helpers-withOpenCL-master/sandbox/cross_compilers/mingw-w64-i686/lib/gcc/i686-w64-mingw32/7.2.0/../../../../i686-w64-mingw32/lib/../lib/libcdio.a(win32.o):win32.c:(.text+0x80):
undefined reference to `_imp__mciSendCommandA at 16'
/home/u/Desktop/ffmpeg-windows-build-helpers-withOpenCL-master/sandbox/cross_compilers/mingw-w64-i686/lib/gcc/i686-w64-mingw32/7.2.0/../../../../i686-w64-mingw32/lib/../lib/libcdio.a(win32.o):win32.c:(.text+0xa2):
undefined reference to `_imp__mciGetErrorStringA at 12'
/home/u/Desktop/ffmpeg-windows-build-helpers-withOpenCL-master/sandbox/cross_compilers/mingw-w64-i686/lib/gcc/i686-w64-mingw32/7.2.0/../../../../i686-w64-mingw32/lib/../lib/libcdio.a(aspi32.o):aspi32.c:(.text+0x1b9a):
undefined reference to `_imp__mciSendCommandA at 16'
<snip lots>
/home/u/Desktop/ffmpeg-windows-build-helpers-withOpenCL-master/sandbox/cross_compilers/mingw-w64-i686/lib/gcc/i686-w64-mingw32/7.2.0/../../../../i686-w64-mingw32/lib/../lib/libcdio.a(aspi32.o):aspi32.c:(.text+0x3205):
undefined reference to `_imp__mciGetErrorStringA at 12'
/home/u/Desktop/ffmpeg-windows-build-helpers-withOpenCL-master/sandbox/cross_compilers/mingw-w64-i686/lib/gcc/i686-w64-mingw32/7.2.0/../../../../i686-w64-mingw32/lib/../lib/libcdio.a(aspi32.o):aspi32.c:(.text+0x3236):
undefined reference to `_imp__mciGetErrorStringA at 12'
collect2: error: ld returned 1 exit status
ERROR: No usable libcdio/cdparanoia found
From: James Almer
Sent: Sunday, October 15, 2017 1:05 AM
To: ffmpeg-devel at ffmpeg.org
Subject: Re: [FFmpeg-devel] Configure: commit
6dfcbd80ad446ff163b47f2bf432bbf706436ea8 broke my builds
On 10/14/2017 7:48 AM, Mark Himsley wrote:
> Update: for me with my specific set of libraries, I have had to apply
> this patch to configure in order to make configure accept my
> configuration parameters: specifically changes to mp3lame, openjpeg
> 1.5, x265 and xvid.
>
> diff --git a/configure b/configure
> index dfbc251..67c012d 100755
> --- a/configure
> +++ b/configure
> @@ -6008,7 +6008,7 @@ enabled libkvazaar && require_pkg_config
> libkvazaar "kvazaar >= 0.8.1" kv
> enabled libmfx && { use_pkg_config libmfx libmfx
> "mfx/mfxvideo.h" MFXInit ||
> { require libmfx "mfx/mfxvideo.h"
> MFXInit -llibmfx && warn "using libmfx without pkg-config"; } }
> enabled libmodplug && require_pkg_config libmodplug libmodplug
> libmodplug/modplug.h ModPlug_Load
> -enabled libmp3lame && require "libmp3lame >= 3.98.3"
> lame/lame.h lame_set_VBR_quality -lmp3lame
> +enabled libmp3lame && require "libmp3lame >= 3.98.3"
> lame/lame.h lame_set_VBR_quality -lmp3lame -lm
Will fix this. Thanks.
> enabled libmysofa && require libmysofa "mysofa.h"
> mysofa_load -lmysofa
> enabled libnpp && { check_lib libnpp npp.h
> nppGetLibVersion -lnppig -lnppicc -lnppc ||
> check_lib libnpp npp.h
> nppGetLibVersion -lnppi -lnppc ||
> @@ -6027,7 +6027,7 @@ enabled libopenjpeg && { { check_lib
> libopenjpeg openjpeg-2.3/openjpeg.h o
> { check_lib libopenjpeg
> openjpeg-2.1/openjpeg.h opj_version -lopenjp2 -DOPJ_STATIC &&
> add_cppflags -DOPJ_STATIC; } ||
> check_lib libopenjpeg
> openjpeg-2.1/openjpeg.h opj_version -lopenjp2 ||
> { check_lib libopenjpeg
> openjpeg-2.0/openjpeg.h opj_version -lopenjp2 -DOPJ_STATIC &&
> add_cppflags -DOPJ_STATIC; } ||
> - { check_lib libopenjpeg
> openjpeg-1.5/openjpeg.h opj_version -lopenjpeg -DOPJ_STATIC &&
> add_cppflags -DOPJ_STATIC; } ||
> + { check_lib libopenjpeg
> openjpeg-1.5/openjpeg.h opj_version -lopenjpeg -lm -DOPJ_STATIC &&
> add_cppflags -DOPJ_STATIC; } ||
> { check_lib libopenjpeg openjpeg.h
> opj_version -lopenjpeg -DOPJ_STATIC && add_cppflags -DOPJ_STATIC; } ||
> die "ERROR: libopenjpeg not found"; }
OpenJPEG will be solved soon by switching to pkg-config (which adds the
math library ldflag).
> enabled libopenmpt && require_pkg_config libopenmpt
> "libopenmpt >= 0.2.6557" libopenmpt/libopenmpt.h openmpt_module_create
> @@ -6096,10 +6096,10 @@ enabled libx264 && { use_pkg_config
> libx264 x264 "stdint.h x264.h" x26
> require_cpp_condition x264.h "X264_BUILD
>> = 118" &&
> { check_cpp_condition x264.h "X264_MPEG2" &&
> enable libx262; }
> -enabled libx265 && require_pkg_config libx265 x265 x265.h
> x265_api_get &&
> +enabled libx265 && require_pkg_config libx265 x265 x265.h
> x265_api_get -lpthread &&
This one should be fixed by x265. It's them who should add a pthreads
dependency on their pkg-config file for static builds if it's required.
> require_cpp_condition x265.h "X265_BUILD >=
> 68"
> enabled libxavs && require libxavs "stdint.h xavs.h"
> xavs_encoder_encode -lxavs
> -enabled libxvid && require libxvid xvid.h
> xvid_global -lxvidcore
> +enabled libxvid && require libxvid xvid.h xvid_global
> -lxvidcore -lpthread -lm
Will fix it.
> enabled libzimg && require_pkg_config libzimg "zimg >=
> 2.3.0" zimg.h zimg_get_api_version
> enabled libzmq && require_pkg_config libzmq libzmq zmq.h
> zmq_ctx_new
> enabled libzvbi && require libzvbi libzvbi.h
> vbi_decoder_new -lzvbi &&
>
>
>
> On 14 October 2017 at 11:00, Mark Himsley <mark.himsley at gmail.com> wrote:
>> I build FFmpeg and all the libraries I need every night. Since 08:00
>> BST on 12-Oct-2017 that build has not worked, the previous build on
>> 11-Oct-2017 worked.
>>
>> My configure command for building 64bit Linux that is run on an Ubuntu
>> 16.04 system, which worked on Wednesday but not on Thursday, is:
>>
>> ./configure --extra-version=static_x86_64-pc-linux-gnu
>> --extra-cflags="--static -static" --extra-libs="-static"
>> --pkg-config-flags="--static" --cross-prefix= --arch=x86_64
>> --target-os=linux --prefix="/opt/bbc/ff_lib" --enable-gpl
>> --enable-nonfree --disable-ffplay --disable-dxva2 --enable-libmp3lame
>> --enable-libfdk-aac --enable-libspeex --enable-libtheora
>> --enable-libvorbis --enable-libopus --enable-libopenjpeg
>> --enable-libvpx --enable-libxvid --enable-libx264 --enable-libx265
>>
>> (yes, the configure contains options, like cross-prefix and arch and
>> target that are not necessarily normally needed, but I build for
>> Linux, Windows 32 and 64 bit static binaries and macOS static binary
>> with the same configure command but with different variable
>> substitutions)
>>
>> The configure.log extract is:
>>
>> ...
>> require libmp3lame >= 3.98.3 lame/lame.h lame_set_VBR_quality -lmp3lame
>> check_lib libmp3lame lame/lame.h lame_set_VBR_quality -lmp3lame
>> check_func_headers lame/lame.h lame_set_VBR_quality -lmp3lame
>> check_ld cc -lmp3lame
>> check_cc
>> BEGIN /tmp/ffconf.Daqbd9DA/test.c
>> 1 #include <lame/lame.h>
>> 2 #include <stdint.h>
>> 3 long check_lame_set_VBR_quality(void) { return (long)
>> lame_set_VBR_quality; }
>> 4 int main(void) { int ret = 0;
>> 5 ret |= ((intptr_t)check_lame_set_VBR_quality) & 0xFFFF;
>> 6 return ret; }
>> END /tmp/ffconf.Daqbd9DA/test.c
>> gcc --static -static -I/opt/bbc/ff_lib/include -D_ISOC99_SOURCE
>> -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_POSIX_C_SOURCE=200112
>> -D_XOPEN_SOURCE=600 --static -static -I/opt/bbc/ff_lib/include
>> --static -static -std=c11 -fomit-frame
>> -pointer -pthread -I/opt/bbc/ff_lib/include -c -o
>> /tmp/ffconf.Daqbd9DA/test.o /tmp/ffconf.Daqbd9DA/test.c
>> gcc -L/opt/bbc/ff_lib/lib -static -Wl,--as-needed -Wl,-z,noexecstack
>> -o /tmp/ffconf.Daqbd9DA/test /tmp/ffconf.Daqbd9DA/test.o -lmp3lame
>> -static
>> /opt/bbc/ff_lib/lib/libmp3lame.a(gain_analysis.o): In function
>> `AnalyzeSamples':
>> gain_analysis.c:(.text+0xedd): undefined reference to `log10'
>> /opt/bbc/ff_lib/lib/libmp3lame.a(gain_analysis.o): In function
>> `analyzeResult':
>> gain_analysis.c:(.text+0x12aa): undefined reference to `ceil'
>> /opt/bbc/ff_lib/lib/libmp3lame.a(lame.o): In function `filter_coef':
>> lame.c:(.text+0xb1): undefined reference to `cos'
>> /opt/bbc/ff_lib/lib/libmp3lame.a(lame.o): In function `lame_init_params':
>> lame.c:(.text+0x320c): undefined reference to `pow'
>> lame.c:(.text+0x3463): undefined reference to `powf'
>> /opt/bbc/ff_lib/lib/libmp3lame.a(lame.o): In function
>> `lame_print_internals':
>> lame.c:(.text+0x4613): undefined reference to `log10'
>> ...
>>
>> Etc. Which suggests to me that -lm is missing.
>>
>> When I checkout 58143b15adda6391ec07f3eb19e80ed91d801edd, the parent
>> of 6dfcbd80ad446ff163b47f2bf432bbf706436ea8, my configure works.
>> When I checkout 6dfcbd80ad446ff163b47f2bf432bbf706436ea8 my configure
>> fails.
>>
>>
>> If I edit configure to add -lm to the mp3lame tests, which works for
>> that library, the next library test fails in a similar way. I think
>> 6dfcbd80ad446ff163b47f2bf432bbf706436ea8 has done sevear damage to the
>> configuration of FFmpeg. I wonder if building static was considered,
>> or whether my configure command line is not passing the right
>> parameters to make a static builds.
>>
>> --
>> Mark Himsley
>
>
>
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel at ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
More information about the ffmpeg-devel
mailing list