[FFmpeg-devel] [PATCH v4 5/5] libavfilter: VAAPI surface converter

wm4 nfxjfg at googlemail.com
Sun Jan 24 13:51:54 CET 2016


On Sat, 23 Jan 2016 19:17:00 +0000
Mark Thompson <sw at jkqxz.net> wrote:

> ---
>  configure                   |   2 +
>  libavfilter/Makefile        |   1 +
>  libavfilter/allfilters.c    |   1 +
>  libavfilter/vf_vaapi_conv.c | 537 ++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 541 insertions(+)
>  create mode 100644 libavfilter/vf_vaapi_conv.c
> 
> diff --git a/configure b/configure
> index f30ddab..a068d05 100755
> --- a/configure
> +++ b/configure
> @@ -2920,6 +2920,7 @@ stereo3d_filter_deps="gpl"
>  subtitles_filter_deps="avformat avcodec libass"
>  super2xsai_filter_deps="gpl"
>  tinterlace_filter_deps="gpl"
> +vaapi_conv_filter_deps="vaapi_recent VAProcPipelineParameterBuffer"
>  vidstabdetect_filter_deps="libvidstab"
>  vidstabtransform_filter_deps="libvidstab"
>  pixfmts_super2xsai_test_deps="super2xsai_filter"
> @@ -5362,6 +5363,7 @@ check_type "va/va.h" "VAPictureParameterBufferHEVC"
>  check_type "va/va.h" "VADecPictureParameterBufferVP9"
>  check_type "va/va.h" "VAEncPictureParameterBufferH264"
>  check_type "va/va.h" "VAEncPictureParameterBufferHEVC"
> +check_type "va/va.h" "VAProcPipelineParameterBuffer"
> 
>  check_type "vdpau/vdpau.h" "VdpPictureInfoHEVC"
> 
> diff --git a/libavfilter/Makefile b/libavfilter/Makefile
> index b93e5f2..c8ed7c8 100644
> --- a/libavfilter/Makefile
> +++ b/libavfilter/Makefile
> @@ -248,6 +248,7 @@ OBJS-$(CONFIG_TRANSPOSE_FILTER)              += vf_transpose.o
>  OBJS-$(CONFIG_TRIM_FILTER)                   += trim.o
>  OBJS-$(CONFIG_UNSHARP_FILTER)                += vf_unsharp.o
>  OBJS-$(CONFIG_USPP_FILTER)                   += vf_uspp.o
> +OBJS-$(CONFIG_VAAPI_CONV_FILTER)             += vf_vaapi_conv.o
>  OBJS-$(CONFIG_VECTORSCOPE_FILTER)            += vf_vectorscope.o
>  OBJS-$(CONFIG_VFLIP_FILTER)                  += vf_vflip.o
>  OBJS-$(CONFIG_VIDSTABDETECT_FILTER)          += vidstabutils.o vf_vidstabdetect.o
> diff --git a/libavfilter/allfilters.c b/libavfilter/allfilters.c
> index 1d48970..12e3859 100644
> --- a/libavfilter/allfilters.c
> +++ b/libavfilter/allfilters.c
> @@ -268,6 +268,7 @@ void avfilter_register_all(void)
>      REGISTER_FILTER(TRIM,           trim,           vf);
>      REGISTER_FILTER(UNSHARP,        unsharp,        vf);
>      REGISTER_FILTER(USPP,           uspp,           vf);
> +    REGISTER_FILTER(VAAPI_CONV,     vaapi_conv,     vf);
>      REGISTER_FILTER(VECTORSCOPE,    vectorscope,    vf);
>      REGISTER_FILTER(VFLIP,          vflip,          vf);
>      REGISTER_FILTER(VIDSTABDETECT,  vidstabdetect,  vf);
> diff --git a/libavfilter/vf_vaapi_conv.c b/libavfilter/vf_vaapi_conv.c
> new file mode 100644
> index 0000000..c8034e7
> --- /dev/null
> +++ b/libavfilter/vf_vaapi_conv.c
> @@ -0,0 +1,537 @@
> +/*
> + * VAAPI converter (scaling and colour conversion).
> + *
> + * Copyright (C) 2016 Mark Thompson <mrt at jkqxz.net>
> + *
> + * This file is part of FFmpeg.
> + *
> + * FFmpeg is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * FFmpeg is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with FFmpeg; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +
> +#include "avfilter.h"
> +#include "formats.h"
> +#include "internal.h"
> +
> +#include "libavutil/avassert.h"
> +#include "libavutil/opt.h"
> +#include "libavutil/pixdesc.h"
> +#include "libavutil/vaapi.h"
> +
> +#include <va/va_vpp.h>
> +
> +typedef struct VAAPIConvContext {
> +    const AVClass *class;
> +
> +    AVVAAPIHardwareContext *hardware_context;
> +    AVVAAPIPipelineConfig  pipeline_config;
> +    AVVAAPIPipelineContext pipeline;
> +    int pipeline_initialised;
> +
> +    int input_is_vaapi;
> +    AVVAAPISurfaceConfig input_config;
> +    AVVAAPISurfacePool   input_pool;
> +    AVVAAPISurfaceConfig output_config;
> +    AVVAAPISurfacePool   output_pool;
> +
> +    int output_width;
> +    int output_height;
> +
> +    struct {
> +        int64_t hardware_context;
> +        int output_size[2];
> +    } options;
> +
> +} VAAPIConvContext;
> +
> +
> +static int vaapi_conv_query_formats(AVFilterContext *avctx)
> +{
> +    VAAPIConvContext *ctx = avctx->priv;
> +    VAStatus vas;
> +    VAConfigAttrib rt_format = {
> +        .type = VAConfigAttribRTFormat
> +    };
> +    enum AVPixelFormat pix_fmt_list[16] = {
> +        AV_PIX_FMT_VAAPI,
> +    };
> +    int pix_fmt_count = 1, err;
> +
> +#if 0
> +    // The Intel driver doesn't return anything useful here - it only
> +    // declares support for YUV 4:2:0 formats, despite working perfectly
> +    // with 32-bit RGB ones.  Given another usable platform, this will
> +    // need to be updated.
> +    vas = vaGetConfigAttributes(ctx->hardware_context->display,
> +                                VAProfileNone, VAEntrypointVideoProc,
> +                                &rt_format, 1);

Misses locking (it's disabled code though).

> +#else
> +    vas = VA_STATUS_SUCCESS;
> +    rt_format.value = VA_RT_FORMAT_YUV420 | VA_RT_FORMAT_RGB32;
> +#endif
> +    if(vas != VA_STATUS_SUCCESS) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to get config attributes: "
> +               "%d (%s).\n", vas, vaErrorStr(vas));
> +    } else {
> +        if(rt_format.value & VA_RT_FORMAT_YUV420) {
> +            av_log(ctx, AV_LOG_DEBUG, "YUV420 formats supported.\n");
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_YUV420P;
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_NV12;
> +        }
> +        if(rt_format.value & VA_RT_FORMAT_YUV422) {
> +            av_log(ctx, AV_LOG_DEBUG, "YUV422 formats supported.\n");
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_YUV422P;
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_YUYV422;
> +        }
> +        if(rt_format.value & VA_RT_FORMAT_YUV444) {
> +            av_log(ctx, AV_LOG_DEBUG, "YUV444 formats supported.\n");
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_YUV444P;
> +        }
> +        if(rt_format.value & VA_RT_FORMAT_YUV400) {
> +            av_log(ctx, AV_LOG_DEBUG, "Grayscale formats supported.\n");
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_GRAY8;
> +        }
> +        if(rt_format.value & VA_RT_FORMAT_RGB32) {
> +            av_log(ctx, AV_LOG_DEBUG, "RGB32 formats supported.\n");
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_RGBA;
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_BGRA;
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_RGB0;
> +            pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_BGR0;
> +        }
> +    }
> +
> +    pix_fmt_list[pix_fmt_count] = AV_PIX_FMT_NONE;
> +
> +    if(avctx->inputs[0]) {
> +        err = ff_formats_ref(ff_make_format_list(pix_fmt_list),
> +                             &avctx->inputs[0]->out_formats);
> +        if(err < 0)
> +            return err;
> +    }
> +
> +    if(avctx->outputs[0]) {
> +        // Truncate the list: no support for normal output yet.
> +        pix_fmt_list[1] = AV_PIX_FMT_NONE;
> +
> +        err = ff_formats_ref(ff_make_format_list(pix_fmt_list),
> +                             &avctx->outputs[0]->in_formats);
> +        if(err < 0)
> +            return err;
> +    }
> +
> +    return 0;
> +}
> +
> +static int vaapi_conv_config_pipeline(VAAPIConvContext *ctx)
> +{
> +    AVVAAPIPipelineConfig *config = &ctx->pipeline_config;
> +    int err;
> +
> +    if(ctx->pipeline_initialised) {
> +        av_log(ctx, AV_LOG_ERROR, "Pipeline reinitialisation not supported");
> +        return AVERROR(EINVAL);
> +    }
> +
> +    config->profile = VAProfileNone;
> +    config->entrypoint = VAEntrypointVideoProc;
> +
> +    config->attribute_count = 0;
> +
> +    av_vaapi_lock_hardware_context(ctx->hardware_context);
> +
> +    err = av_vaapi_pipeline_init(&ctx->pipeline, ctx->hardware_context,
> +                                 &ctx->pipeline_config, &ctx->output_pool);
> +    if(err) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to create video processing "
> +               "pipeline: " "%d (%s).\n", err, av_err2str(err));
> +    }
> +
> +    av_vaapi_unlock_hardware_context(ctx->hardware_context);
> +
> +    ctx->pipeline_initialised = 1;
> +
> +    return err;
> +}
> +
> +static int vaapi_conv_config_input(AVFilterLink *inlink)
> +{
> +    AVFilterContext *avctx = inlink->dst;
> +    VAAPIConvContext *ctx = avctx->priv;
> +    AVVAAPISurfaceConfig *config = &ctx->input_config;
> +    int err;
> +
> +    if(inlink->format == AV_PIX_FMT_VAAPI) {
> +        av_log(ctx, AV_LOG_DEBUG, "Input is VAAPI (using incoming surfaces).\n");
> +        ctx->input_is_vaapi = 1;
> +        return 0;
> +    }
> +    ctx->input_is_vaapi = 0;
> +
> +    config->rt_format = VA_RT_FORMAT_YUV420;
> +    config->av_format = AV_PIX_FMT_VAAPI;
> +
> +    switch(inlink->format) {
> +    case AV_PIX_FMT_BGR0:
> +    case AV_PIX_FMT_BGRA:
> +        config->image_format.fourcc     = VA_FOURCC_BGRX;
> +        config->image_format.byte_order = VA_LSB_FIRST;
> +        config->image_format.bits_per_pixel = 32;
> +        config->image_format.depth      = 8;
> +        config->image_format.red_mask   = 0x00ff0000;
> +        config->image_format.green_mask = 0x0000ff00;
> +        config->image_format.blue_mask  = 0x000000ff;
> +        config->image_format.alpha_mask = 0x00000000;
> +        break;
> +
> +    case AV_PIX_FMT_RGB0:
> +    case AV_PIX_FMT_RGBA:
> +        config->image_format.fourcc     = VA_FOURCC_RGBX;
> +        config->image_format.byte_order = VA_LSB_FIRST;
> +        config->image_format.bits_per_pixel = 32;
> +        config->image_format.depth      = 8;
> +        config->image_format.red_mask   = 0x000000ff;
> +        config->image_format.green_mask = 0x0000ff00;
> +        config->image_format.blue_mask  = 0x00ff0000;
> +        config->image_format.alpha_mask = 0x00000000;
> +        break;
> +
> +    case AV_PIX_FMT_NV12:
> +        config->image_format.fourcc = VA_FOURCC_NV12;
> +        config->image_format.bits_per_pixel = 12;
> +        break;
> +    case AV_PIX_FMT_YUV420P:
> +        config->image_format.fourcc = VA_FOURCC_YV12;
> +        config->image_format.bits_per_pixel = 12;
> +        break;

Again, repeats stuff libva can return?

> +
> +    default:
> +        av_log(ctx, AV_LOG_ERROR, "Tried to configure with invalid input "
> +               "format %s.\n", av_get_pix_fmt_name(inlink->format));
> +        return AVERROR(EINVAL);
> +    }
> +
> +    config->width  = inlink->w;
> +    config->height = inlink->h;
> +
> +    config->attribute_count = 0;
> +
> +    err = av_vaapi_surface_pool_init(&ctx->input_pool,
> +                                     ctx->hardware_context, config, 4);
> +    if(err) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to create input surface pool: "
> +               "%d (%s).\n", err, av_err2str(err));
> +        return err;
> +    }
> +
> +    if(ctx->output_width == 0)
> +        ctx->output_width = inlink->w;
> +    if(ctx->output_height == 0)
> +        ctx->output_height = inlink->h;
> +
> +    return 0;
> +}
> +
> +static int vaapi_conv_config_output(AVFilterLink *outlink)
> +{
> +    AVFilterContext *avctx = outlink->src;
> +    VAAPIConvContext *ctx = avctx->priv;
> +    AVVAAPISurfaceConfig *config = &ctx->output_config;
> +    int err;
> +
> +    av_assert0(outlink->format == AV_PIX_FMT_VAAPI);
> +    outlink->w = ctx->output_width;
> +    outlink->h = ctx->output_height;
> +
> +    config->rt_format = VA_RT_FORMAT_YUV420;
> +    config->av_format = AV_PIX_FMT_VAAPI;
> +
> +    config->image_format.fourcc = VA_FOURCC_NV12;
> +    config->image_format.bits_per_pixel = 12;

Wait, what about other formats? I'm fairly sure you can use it e.g. to
convert to RGB? Also, libva is going to add 10 bit yuv formats soon.

> +
> +    config->width  = outlink->w;
> +    config->height = outlink->h;
> +
> +    config->attribute_count = 0;
> +
> +    err = av_vaapi_surface_pool_init(&ctx->output_pool,
> +                                     ctx->hardware_context, config, 4);
> +    if(err) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to create output surface pool: "
> +               "%d (%s).\n", err, av_err2str(err));
> +        return err;
> +    }
> +
> +    return vaapi_conv_config_pipeline(ctx);
> +}
> +
> +static int vaapi_proc_colour_standard(enum AVColorSpace av_cs)
> +{
> +    switch(av_cs) {
> +#define CS(av, va) case AVCOL_SPC_ ## av: return VAProcColorStandard ## va;
> +        CS(BT709,     BT709);
> +        CS(BT470BG,   BT601);
> +        CS(SMPTE170M, SMPTE170M);
> +        CS(SMPTE240M, SMPTE240M);
> +#undef CS
> +    default:
> +        return VAProcColorStandardNone;
> +    }
> +}
> +
> +static int vaapi_conv_filter_frame(AVFilterLink *inlink, AVFrame *pic)
> +{
> +    AVFilterContext *avctx = inlink->dst;
> +    AVFilterLink *outlink = avctx->outputs[0];
> +    VAAPIConvContext *ctx = avctx->priv;
> +    AVFrame *input_image, *output_image;
> +    VASurfaceID input_surface, output_surface;
> +    VAProcPipelineParameterBuffer params;
> +    VABufferID params_id;
> +    VAStatus vas;
> +    int err;
> +
> +    av_log(ctx, AV_LOG_DEBUG, "Filter frame: %s, %ux%u.\n",
> +           av_get_pix_fmt_name(pic->format), pic->width, pic->height);
> +
> +    av_vaapi_lock_hardware_context(ctx->hardware_context);
> +
> +    if(pic->format == AV_PIX_FMT_VAAPI) {
> +        input_image = 0;
> +        input_surface = (VASurfaceID)pic->data[3];
> +
> +    } else {
> +        input_image = av_frame_alloc();
> +        if(!input_image) {
> +            av_log(ctx, AV_LOG_ERROR, "Failed to allocate input frame.");
> +            err = AVERROR(ENOMEM);
> +            goto fail;
> +        }
> +
> +        err = av_vaapi_surface_pool_get(&ctx->input_pool, input_image);
> +        if(err) {
> +            av_log(ctx, AV_LOG_ERROR, "Failed to allocate input frame "
> +                   "from surface pool: %d (%s).\n", err, av_err2str(err));
> +            goto fail;
> +        }
> +
> +        input_image->format = AV_PIX_FMT_VAAPI;
> +        input_image->width  = pic->width;
> +        input_image->height = pic->height;
> +
> +        err = av_vaapi_copy_to_surface(input_image, pic);
> +        if(err) {
> +            av_log(ctx, AV_LOG_ERROR, "Failed to copy to input surface: "
> +                   "%d (%s).\n", err, av_err2str(err));
> +            goto fail;
> +        }
> +
> +        input_surface = (VASurfaceID)input_image->data[3];
> +    }
> +    av_log(ctx, AV_LOG_DEBUG, "Using surface %#x for input image.\n",
> +           input_surface);
> +
> +    output_image = av_frame_alloc();
> +    if(!output_image) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to allocate output frame.");
> +        err = AVERROR(ENOMEM);
> +        goto fail;
> +    }
> +
> +    av_frame_copy_props(output_image, pic);
> +
> +    err = av_vaapi_surface_pool_get(&ctx->output_pool, output_image);
> +    if(err) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to allocate output frame "
> +               "from surface pool: %d (%s).\n", err, av_err2str(err));
> +        goto fail;
> +    }
> +
> +    output_surface = (VASurfaceID)output_image->data[3];
> +    av_log(ctx, AV_LOG_DEBUG, "Using surface %#x for output image.\n",
> +           output_surface);
> +
> +    memset(&params, 0, sizeof(params));
> +
> +    params.surface = input_surface;
> +    params.surface_region = 0;
> +    params.surface_color_standard =
> +        vaapi_proc_colour_standard(pic->colorspace);
> +
> +    params.output_region = 0;
> +    params.output_background_color = 0xff000000;
> +    params.output_color_standard = params.surface_color_standard;
> +
> +    params.pipeline_flags = 0;
> +    params.filter_flags = VA_FILTER_SCALING_HQ;
> +
> +    vas = vaBeginPicture(ctx->hardware_context->display,
> +                         ctx->pipeline.context_id, output_surface);
> +    if(vas != VA_STATUS_SUCCESS) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to attach new picture: "
> +               "%d (%s).\n", vas, vaErrorStr(vas));
> +        err = AVERROR_EXTERNAL;
> +        goto fail;
> +    }
> +
> +    vas = vaCreateBuffer(ctx->hardware_context->display,
> +                         ctx->pipeline.context_id,
> +                         VAProcPipelineParameterBufferType,
> +                         sizeof(params), 1, &params, &params_id);
> +    if(vas != VA_STATUS_SUCCESS) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to create parameter buffer: "
> +               "%d (%s).\n", vas, vaErrorStr(vas));
> +        err = AVERROR_EXTERNAL;
> +        goto fail;
> +    }
> +    av_log(ctx, AV_LOG_DEBUG, "Pipeline parameter buffer is %#x.\n",
> +           params_id);
> +
> +    vas = vaRenderPicture(ctx->hardware_context->display,
> +                          ctx->pipeline.context_id, &params_id, 1);
> +    if(vas != VA_STATUS_SUCCESS) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to render parameter buffer: "
> +               "%d (%s).\n", vas, vaErrorStr(vas));
> +        err = AVERROR_EXTERNAL;
> +        goto fail;

Is it a good idea to fail without "releasing" it with vaEndPicture?

> +    }
> +
> +    vas = vaEndPicture(ctx->hardware_context->display,
> +                       ctx->pipeline.context_id);
> +    if(vas != VA_STATUS_SUCCESS) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to start picture processing: "
> +               "%d (%s).\n", vas, vaErrorStr(vas));
> +        err = AVERROR_EXTERNAL;
> +        goto fail;
> +    }
> +
> +    vas = vaSyncSurface(ctx->hardware_context->display, output_surface);

Is this needed?

> +    if(vas != VA_STATUS_SUCCESS) {
> +        av_log(ctx, AV_LOG_ERROR, "Failed to sync picture completion: "
> +               "%d (%s).\n", vas, vaErrorStr(vas));
> +        err = AVERROR_EXTERNAL;
> +        goto fail;
> +    }
> +
> +    av_frame_free(&input_image);
> +    if(pic->format != AV_PIX_FMT_VAAPI)
> +        av_frame_free(&pic);
> +
> +    av_vaapi_unlock_hardware_context(ctx->hardware_context);
> +
> +    return ff_filter_frame(outlink, output_image);
> +
> +  fail:
> +    av_vaapi_unlock_hardware_context(ctx->hardware_context);
> +    return err;
> +}
> +
> +static av_cold int vaapi_conv_init(AVFilterContext *avctx)
> +{
> +    VAAPIConvContext *ctx = avctx->priv;
> +
> +    if(ctx->options.hardware_context == 0) {
> +        av_log(ctx, AV_LOG_ERROR, "VAAPI encode requires hardware context.\n");
> +        return AVERROR(EINVAL);
> +    }
> +    ctx->hardware_context =
> +        (AVVAAPIHardwareContext*)ctx->options.hardware_context;
> +
> +    ctx->output_width  = ctx->options.output_size[0];
> +    ctx->output_height = ctx->options.output_size[1];
> +
> +    return 0;
> +}
> +
> +static av_cold void vaapi_conv_uninit(AVFilterContext *avctx)
> +{
> +    VAAPIConvContext *ctx = avctx->priv;
> +    int err;
> +
> +    if(ctx->pipeline_initialised) {
> +        av_vaapi_lock_hardware_context(ctx->hardware_context);
> +
> +        err = av_vaapi_pipeline_uninit(&ctx->pipeline);
> +        if(err) {
> +            av_log(ctx, AV_LOG_ERROR, "Failed to uninitialise video "
> +                   "processing pipeline: %d (%s).\n", err, av_err2str(err));
> +        }
> +
> +        err = av_vaapi_surface_pool_uninit(&ctx->output_pool);
> +        if(err) {
> +            av_log(ctx, AV_LOG_ERROR, "Failed to uninitialise output "
> +                   "surface pool: %d (%s).\n", err, av_err2str(err));
> +        }
> +
> +        if(!ctx->input_is_vaapi) {
> +            err = av_vaapi_surface_pool_uninit(&ctx->input_pool);
> +            if(err) {
> +                av_log(ctx, AV_LOG_ERROR, "Failed to uninitialise input "
> +                       "surface pool: %d (%s).\n", err, av_err2str(err));
> +            }
> +        }
> +
> +        av_vaapi_unlock_hardware_context(ctx->hardware_context);
> +    }
> +}
> +
> +
> +#define OFFSET(member) offsetof(VAAPIConvContext, options.member)
> +#define FLAGS (AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM)
> +static const AVOption vaapi_conv_options[] = {
> +    { "hardware_context", "VAAPI hardware context",
> +      OFFSET(hardware_context), AV_OPT_TYPE_INT64,
> +      { .i64 = 0 }, INT64_MIN, INT64_MAX, AV_OPT_FLAG_VIDEO_PARAM },
> +    { "size", "Set output size",
> +      OFFSET(output_size), AV_OPT_TYPE_IMAGE_SIZE,
> +      { 0 }, 0, 0, FLAGS },
> +    { 0 },
> +};
> +
> +static const AVClass vaapi_conv_class = {
> +    .class_name = "VAAPI/conv",
> +    .item_name  = av_default_item_name,
> +    .option     = vaapi_conv_options,
> +    .version    = LIBAVUTIL_VERSION_INT,
> +};
> +
> +static const AVFilterPad vaapi_conv_inputs[] = {
> +    {
> +        .name         = "default",
> +        .type         = AVMEDIA_TYPE_VIDEO,
> +        .filter_frame = &vaapi_conv_filter_frame,
> +        .config_props = &vaapi_conv_config_input,
> +    },
> +    { 0 }
> +};
> +
> +static const AVFilterPad vaapi_conv_outputs[] = {
> +    {
> +        .name = "default",
> +        .type = AVMEDIA_TYPE_VIDEO,
> +        .config_props = &vaapi_conv_config_output,
> +    },
> +    { 0 }
> +};
> +
> +AVFilter ff_vf_vaapi_conv = {
> +    .name          = "vaapi_conv",
> +    .description   = NULL_IF_CONFIG_SMALL("Convert to/from VAAPI surfaces."),
> +    .priv_size     = sizeof(VAAPIConvContext),
> +    .init          = &vaapi_conv_init,
> +    .uninit        = &vaapi_conv_uninit,
> +    .query_formats = &vaapi_conv_query_formats,
> +    .inputs        = vaapi_conv_inputs,
> +    .outputs       = vaapi_conv_outputs,
> +    .priv_class    = &vaapi_conv_class,
> +};



More information about the ffmpeg-devel mailing list