[FFmpeg-devel] [PATCH 3/4] doc/filters: reference ffmpeg-utils manual for color and sizes options
Stefano Sabatini
stefasab at gmail.com
Mon Oct 14 20:24:45 CEST 2013
On date Sunday 2013-10-13 18:37:12 -0700, Timothy Gu encoded:
> Signed-off-by: Timothy Gu <timothygu99 at gmail.com>
> ---
> doc/filters.texi | 117 +++++++++++++++++++++++++++++++------------------------
> 1 file changed, 66 insertions(+), 51 deletions(-)
>
> diff --git a/doc/filters.texi b/doc/filters.texi
> index fe4ad36..0bf945b 100644
> --- a/doc/filters.texi
> +++ b/doc/filters.texi
> @@ -3191,8 +3191,8 @@ The expressions which specify the width and height of the box, if 0 they are int
> the input width and height. Default to 0.
>
> @item color, c
> -Specify the color of the box to write, it can be the name of a color
> -(case insensitive match) or a 0xRRGGBB[AA] sequence. If the special
> +Specify the color of the box to write. For the general syntax of this option,
> +check the "Color" section in the ffmpeg-utils manual. If the special
> value @code{invert} is used, the box edge color is the same as the
> video with inverted luma.
See commit d17aaad6308150828bbae2c78ad789401753b22d
This could translate to:
check @ref{color_syntax,,the "Color" section in the ffmpeg-utils(1) manual,ffmpeg-utils} ...
>
> @@ -3288,12 +3288,10 @@ input width and height, respectively, minus @code{thickness}, so image gets
> framed. Default to 0.
>
> @item color, c
> -Specify the color of the grid, it can be the name of a color
> -(case insensitive match) or a 0xRRGGBB[AA] sequence. If the special
> +Specify the color of the grid. For the general syntax of this option,
> +check the "Color" section in the ffmpeg-utils manual. If the special
> value @code{invert} is used, the grid color is the same as the
> video with inverted luma.
> -Note that you can append opacity value (in range of 0.0 - 1.0)
> -to color name after @@ sign.
>
> @item thickness, t
> The expression which sets the thickness of the grid line. Default value is @code{1}.
> @@ -3373,9 +3371,9 @@ Value should be either 1 (enable) or 0 (disable).
> The default value of @var{box} is 0.
>
> @item boxcolor
> -The color to be used for drawing box around text.
> -Either a string (e.g. "yellow") or in 0xRRGGBB[AA] format
> -(e.g. "0xff00ff"), possibly followed by an alpha specifier.
> +The color to be used for drawing box around text. For the syntax of this
> +option, check the "Color" section in the ffmpeg-utils manual.
> +
> The default value of @var{boxcolor} is "white".
>
> @item expansion
> @@ -3388,9 +3386,9 @@ below for details.
> If true, check and fix text coords to avoid clipping.
>
> @item fontcolor
> -The color to be used for drawing fonts.
> -Either a string (e.g. "red") or in 0xRRGGBB[AA] format
> -(e.g. "0xff000033"), possibly followed by an alpha specifier.
> +The color to be used for drawing fonts. For the syntax of this option, check
> +the "Color" section in the ffmpeg-utils manual.
> +
> The default value of @var{fontcolor} is "black".
>
> @item fontfile
> @@ -3430,9 +3428,9 @@ For more information consult the documentation for the FT_LOAD_*
> libfreetype flags.
>
> @item shadowcolor
> -The color to be used for drawing a shadow behind the drawn text. It
> -can be a color name (e.g. "yellow") or a string in the 0xRRGGBB[AA]
> -form (e.g. "0xff00ff"), possibly followed by an alpha specifier.
> +The color to be used for drawing a shadow behind the drawn text. For the
> +syntax of this option, check the "Color" section in the ffmpeg-utils manual.
> +
> The default value of @var{shadowcolor} is "black".
>
> @item shadowx
> @@ -4357,9 +4355,9 @@ A '|'-separated list of parameters to pass to the frei0r effect.
>
> A frei0r effect parameter can be a boolean (whose values are specified
> with "y" and "n"), a double, a color (specified by the syntax
> - at var{R}/@var{G}/@var{B}, @var{R}, @var{G}, and @var{B} being float
> -numbers from 0.0 to 1.0) or by an @code{av_parse_color()} color
> -description), a position (specified by the syntax @var{X}/@var{Y},
> + at var{R}/@var{G}/@var{B}, (@var{R}, @var{G}, and @var{B} being float
> +numbers from 0.0 to 1.0) or by a color description specified in the "Color"
> +section in the ffmpeg-utils manual), a position (specified by the syntax @var{X}/@var{Y},
> @var{X} and @var{Y} being float numbers) and a string.
>
> The number and kind of parameters depend on the loaded effect. If an
> @@ -5840,8 +5838,8 @@ expression, and vice versa.
> The default value of @var{x} and @var{y} is 0.
>
> @item color
> -Specify the color of the padded area, it can be the name of a color
> -(case insensitive match) or a 0xRRGGBB[AA] sequence.
> +Specify the color of the padded area. For the syntax of this option,
> +check the "Color" section in the ffmpeg-utils manual.
>
> The default value of @var{color} is "black".
> @end table
> @@ -6421,9 +6419,11 @@ it. Default value is 1.
>
> @item fillcolor, c
> Set the color used to fill the output area not covered by the rotated
> -image. If the special value "none" is selected then no background is
> -printed (useful for example if the background is never shown). Default
> -value is "black".
> +image. For the generalsyntax of this option, check the "Color" section in the
typotypo
> +ffmpeg-utils manual. If the special value "none" is selected then no
> +background is printed (useful for example if the background is never shown).
> +
> +Default value is "black".
> @end table
>
> The expressions for the angle and the output size can contain the
> @@ -6611,8 +6611,8 @@ complete list of values. If not explictly specified the filter applies
> the default flags.
>
> @item size, s
> -Set the video size, the value must be a valid abbreviation or in the
> -form @var{width}x at var{height}.
> +Set the video size. For the syntax of this option, check the "Video size"
> +section in the ffmpeg-utils manual.
>
> @item in_color_matrix
> @item out_color_matrix
> @@ -6978,8 +6978,8 @@ sample aspect ratio of the input frame, expressed in the form
> @var{num}/@var{den}
>
> @item s
> -size of the input frame, expressed in the form
> - at var{width}x at var{height}
> +size of the input frame. For the syntax of this option, check the "Video size"
> +section in the ffmpeg-utils manual.
>
> @item i
> interlaced mode ("P" for "progressive", "T" for top field first, "B"
> @@ -7247,8 +7247,10 @@ Set the filename of the subtitle file to read. It must be specified.
>
> @item original_size
> Specify the size of the original video, the video for which the ASS file
> -was composed. Due to a misdesign in ASS aspect ratio arithmetic, this is
> -necessary to correctly scale the fonts if the aspect ratio has been changed.
> +was composed. For the syntax of this option, check the "Video size" section in
> +the ffmpeg-utils manual. Due to a misdesign in ASS aspect ratio arithmetic,
> +this is necessary to correctly scale the fonts if the aspect ratio has been
> +changed.
>
> @item charenc
> Set subtitles input character encoding. @code{subtitles} filter only. Only
> @@ -7358,8 +7360,8 @@ The filter accepts the following options:
> @table @option
>
> @item layout
> -Set the grid size (i.e. the number of lines and columns) in the form
> -"@var{w}x at var{h}".
> +Set the grid size (i.e. the number of lines and columns). For the syntax of
> +this option, check the "Video size" section in the ffmpeg-utils manual.
>
> @item nb_frames
> Set the maximum number of frames to render in the given area. It must be less
> @@ -7375,9 +7377,9 @@ more advanced padding options (such as having different values for the edges),
> refer to the pad video filter.
>
> @item color
> -Specify the color of the unused area, it can be the name of a color
> -(case insensitive match) or a 0xRRGGBB[AA] sequence.
> -The default value of @var{color} is "black".
> +Specify the color of the unused areaFor the syntax of this option, check the
> +"Color" section in the ffmpeg-utils manual. The default value of @var{color}
> +is "black".
> @end table
>
> @subsection Examples
> @@ -8145,7 +8147,9 @@ This source accepts the following options:
> @table @option
>
> @item video_size
> -Specify the size (width and height) of the buffered video frames.
> +Specify the size (width and height) of the buffered video frames. For the
> +syntax of this option, check the "Video size" section in the ffmpeg-utils
> +manual.
>
> @item width
> Input video width.
> @@ -8245,7 +8249,8 @@ Set the cellular automaton rule, it is a number ranging from 0 to 255.
> Default value is 110.
>
> @item size, s
> -Set the size of the output video.
> +Set the size of the output video. For the syntax of this option, check
> +the "Video size" section in the ffmpeg-utils manual.
>
> If @option{filename} or @option{pattern} is specified, the size is set
> by default to the width of the specified initial state row, and the
> @@ -8363,7 +8368,8 @@ Set frame rate, expressed as number of frames per second. Default
> value is "25".
>
> @item size, s
> -Set frame size. Default value is "640x480".
> +Set frame size. For the syntax of this option, check the "Video
> +size" section in the ffmpeg-utils manual. Default value is "640x480".
>
> @item start_scale
> Set the initial scale value. Default value is 3.0.
> @@ -8445,8 +8451,8 @@ This source accepts the following options:
> @table @option
>
> @item size
> -The size of the video to generate, may be a string of the form
> - at var{width}x at var{height} or a frame size abbreviation.
> +The size of the video to generate. For the syntax of this option, check the
> +"Video size" section in the ffmpeg-utils manual.
>
> @item framerate
> Framerate of the generated video, may be a string of the form
> @@ -8534,7 +8540,8 @@ cells, and will born a new cell if there are three alive cells around
> a dead cell.
>
> @item size, s
> -Set the size of the output video.
> +Set the size of the output video. For the syntax of this option, check the
> +"Video size" section in the ffmpeg-utils manual.
>
> If @option{filename} is specified, the size is set by default to the
> same size of the input file. If @option{size} is set, it must contain
> @@ -8562,6 +8569,9 @@ used to represent a dead cell.
>
> @item mold_color
> Set mold color, for definitely dead and moldy cells.
> +
> +For the syntax of these 3 color options, check the "Color" section in the
> +ffmpeg-utils manual.
> @end table
>
> @subsection Examples
> @@ -8631,9 +8641,8 @@ The sources accept the following options:
>
> @item color, c
> Specify the color of the source, only available in the @code{color}
> -source. It can be the name of a color (case insensitive match) or a
> -0xRRGGBB[AA] sequence, possibly followed by an alpha specifier. The
> -default value is "black".
> +source. For the syntax of this option, check the "Color" section in the
> +ffmpeg-utils manual.
>
> @item level
> Specify the level of the Hald CLUT, only available in the @code{haldclutsrc}
> @@ -8642,9 +8651,9 @@ pixels to be used as identity matrix for 3D lookup tables. Each component is
> coded on a @code{1/(N*N)} scale.
>
> @item size, s
> -Specify the size of the sourced video, it may be a string of the form
> - at var{width}x at var{height}, or the name of a size abbreviation. The
> -default value is "320x240".
> +Specify the size of the sourced video. For the syntax of this option, check the
> +"Video size" section in the ffmpeg-utils manual. The default value is
> +"320x240".
>
> This option is not available with the @code{haldclutsrc} filter.
>
> @@ -8773,7 +8782,8 @@ Same as above but not rotated.
> Default value is @samp{lissajous}.
>
> @item size, s
> -Set the video size for the output. Default value is @code{400x400}.
> +Set the video size for the output. For the syntax of this option, check the "Video size"
> +section in the ffmpeg-utils manual. Default value is @code{400x400}.
>
> @item rate, r
> Set the output frame rate. Default value is @code{25}.
> @@ -8912,8 +8922,9 @@ option is set or no. The video stream will be the first output stream if
> activated. Default is @code{0}.
>
> @item size
> -Set the video size. This option is for video only. Default and minimum
> -resolution is @code{640x480}.
> +Set the video size. This option is for video only. For the syntax of this
> +option, check the "Video size" section in the ffmpeg-utils manual. Default
> +and minimum resolution is @code{640x480}.
>
> @item meter
> Set the EBU scale meter. Default is @code{9}. Common values are @code{9} and
> @@ -9555,7 +9566,9 @@ The filter accepts the following options:
>
> @table @option
> @item size, s
> -Specify the video size for the output. Default value is @code{640x512}.
> +Specify the video size for the output. For the syntax of this option, check
> +the "Video size" section in the ffmpeg-utils manual. Default value is
> + at code{640x512}.
>
> @item slide
> Specify if the spectrum should slide along the window. Default value is
> @@ -9639,7 +9652,9 @@ The filter accepts the following options:
>
> @table @option
> @item size, s
> -Specify the video size for the output. Default value is "600x240".
> +Specify the video size for the output. For the syntax of this option, check
> +the "Video size" section in the ffmpeg-utils manual. Default value
> +is "600x240".
Same could be done above (but I'll probably commit the patch in the
current form if you don't plan to work more on this).
--
FFmpeg = Fanciful and Frightening Mere Political Embarassing Gigant
More information about the ffmpeg-devel
mailing list