[FFmpeg-cvslog] avdevice/decklink: add support for setting duplex mode
Marton Balint
git at videolan.org
Sun Jun 26 19:20:08 CEST 2016
ffmpeg | branch: master | Marton Balint <cus at passwd.hu> | Sat Jun 11 13:41:29 2016 +0200| [8f9fa49bd8bfd8cd2008da97eec7acf18873b960] | committer: Marton Balint
avdevice/decklink: add support for setting duplex mode
This patch also makes BlackMagic drivers v10.6.1 a hard requirement.
Reviewed-by: Deti Fliegl <deti at fliegl.de>
Signed-off-by: Marton Balint <cus at passwd.hu>
> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=8f9fa49bd8bfd8cd2008da97eec7acf18873b960
---
configure | 3 ++-
doc/indevs.texi | 4 ++++
libavdevice/decklink_common.cpp | 33 +++++++++++++++++++++++++++++++++
libavdevice/decklink_common.h | 3 +++
libavdevice/decklink_common_c.h | 1 +
libavdevice/decklink_dec.cpp | 1 +
libavdevice/decklink_dec_c.c | 4 ++++
7 files changed, 48 insertions(+), 1 deletion(-)
diff --git a/configure b/configure
index 6aadf9c..19aea61 100755
--- a/configure
+++ b/configure
@@ -5625,7 +5625,8 @@ enabled cuvid && { check_lib cuviddec.h cuvidCreateDecoder -lnvcuvid
enabled chromaprint && require chromaprint chromaprint.h chromaprint_get_version -lchromaprint
enabled coreimage_filter && { check_header_objcc QuartzCore/CoreImage.h || disable coreimage_filter; }
enabled coreimagesrc_filter && { check_header_objcc QuartzCore/CoreImage.h || disable coreimagesrc_filter; }
-enabled decklink && { check_header DeckLinkAPI.h || die "ERROR: DeckLinkAPI.h header not found"; }
+enabled decklink && { { check_header DeckLinkAPI.h || die "ERROR: DeckLinkAPI.h header not found"; } &&
+ { check_cpp_condition DeckLinkAPIVersion.h "BLACKMAGIC_DECKLINK_API_VERSION >= 0x0a060100" || die "ERROR: Decklink API version must be >= 10.6.1."; } }
enabled frei0r && { check_header frei0r.h || die "ERROR: frei0r.h header not found"; }
enabled gmp && require2 gmp gmp.h mpz_export -lgmp
enabled gnutls && require_pkg_config gnutls gnutls/gnutls.h gnutls_global_init
diff --git a/doc/indevs.texi b/doc/indevs.texi
index 3fb852b..479932a 100644
--- a/doc/indevs.texi
+++ b/doc/indevs.texi
@@ -251,6 +251,10 @@ To use this option, ffmpeg needs to be compiled with @code{--enable-libzvbi}.
Defines number of audio channels to capture. Must be @samp{2}, @samp{8} or @samp{16}.
Defaults to @samp{2}.
+ at item duplex_mode
+Sets the decklink device duplex mode. Must be @samp{unset}, @samp{half} or @samp{full}.
+Defaults to @samp{unset}.
+
@end table
@subsection Examples
diff --git a/libavdevice/decklink_common.cpp b/libavdevice/decklink_common.cpp
index 2711fc1..b6a2c96 100644
--- a/libavdevice/decklink_common.cpp
+++ b/libavdevice/decklink_common.cpp
@@ -111,6 +111,23 @@ int ff_decklink_set_format(AVFormatContext *avctx,
int i = 1;
HRESULT res;
+ if (ctx->duplex_mode) {
+ bool duplex_supported = false;
+
+ if (ctx->attr->GetFlag(BMDDeckLinkSupportsDuplexModeConfiguration, &duplex_supported) != S_OK)
+ duplex_supported = false;
+
+ if (duplex_supported) {
+ res = ctx->cfg->SetInt(bmdDeckLinkConfigDuplexMode, ctx->duplex_mode == 2 ? bmdDuplexModeFull : bmdDuplexModeHalf);
+ if (res != S_OK)
+ av_log(avctx, AV_LOG_WARNING, "Setting duplex mode failed.\n");
+ else
+ av_log(avctx, AV_LOG_VERBOSE, "Succesfully set duplex mode to %s duplex.\n", ctx->duplex_mode == 2 ? "full" : "half");
+ } else {
+ av_log(avctx, AV_LOG_WARNING, "Unable to set duplex mode, because it is not supported.\n");
+ }
+ }
+
if (direction == DIRECTION_IN) {
res = ctx->dli->GetDisplayModeIterator (&itermode);
} else {
@@ -249,6 +266,10 @@ void ff_decklink_cleanup(AVFormatContext *avctx)
ctx->dli->Release();
if (ctx->dlo)
ctx->dlo->Release();
+ if (ctx->attr)
+ ctx->attr->Release();
+ if (ctx->cfg)
+ ctx->cfg->Release();
if (ctx->dl)
ctx->dl->Release();
}
@@ -279,5 +300,17 @@ int ff_decklink_init_device(AVFormatContext *avctx, const char* name)
if (!ctx->dl)
return AVERROR(ENXIO);
+ if (ctx->dl->QueryInterface(IID_IDeckLinkConfiguration, (void **)&ctx->cfg) != S_OK) {
+ av_log(avctx, AV_LOG_ERROR, "Could not get configuration interface for '%s'\n", name);
+ ff_decklink_cleanup(avctx);
+ return AVERROR_EXTERNAL;
+ }
+
+ if (ctx->dl->QueryInterface(IID_IDeckLinkAttributes, (void **)&ctx->attr) != S_OK) {
+ av_log(avctx, AV_LOG_ERROR, "Could not get attributes interface for '%s'\n", name);
+ ff_decklink_cleanup(avctx);
+ return AVERROR_EXTERNAL;
+ }
+
return 0;
}
diff --git a/libavdevice/decklink_common.h b/libavdevice/decklink_common.h
index ee39ff2..201eb15 100644
--- a/libavdevice/decklink_common.h
+++ b/libavdevice/decklink_common.h
@@ -44,6 +44,8 @@ struct decklink_ctx {
IDeckLink *dl;
IDeckLinkOutput *dlo;
IDeckLinkInput *dli;
+ IDeckLinkConfiguration *cfg;
+ IDeckLinkAttributes *attr;
decklink_output_callback *output_callback;
decklink_input_callback *input_callback;
@@ -77,6 +79,7 @@ struct decklink_ctx {
int list_formats;
int64_t teletext_lines;
double preroll;
+ int duplex_mode;
int frames_preroll;
int frames_buffer;
diff --git a/libavdevice/decklink_common_c.h b/libavdevice/decklink_common_c.h
index 2b5d92f..f24f8f0 100644
--- a/libavdevice/decklink_common_c.h
+++ b/libavdevice/decklink_common_c.h
@@ -34,6 +34,7 @@ struct decklink_cctx {
double preroll;
int v210;
int audio_channels;
+ int duplex_mode;
};
#endif /* AVDEVICE_DECKLINK_COMMON_C_H */
diff --git a/libavdevice/decklink_dec.cpp b/libavdevice/decklink_dec.cpp
index 371be20..fc9633f 100644
--- a/libavdevice/decklink_dec.cpp
+++ b/libavdevice/decklink_dec.cpp
@@ -445,6 +445,7 @@ av_cold int ff_decklink_read_header(AVFormatContext *avctx)
ctx->list_formats = cctx->list_formats;
ctx->teletext_lines = cctx->teletext_lines;
ctx->preroll = cctx->preroll;
+ ctx->duplex_mode = cctx->duplex_mode;
cctx->ctx = ctx;
#if !CONFIG_LIBZVBI
diff --git a/libavdevice/decklink_dec_c.c b/libavdevice/decklink_dec_c.c
index 40c21a7..72baa7d 100644
--- a/libavdevice/decklink_dec_c.c
+++ b/libavdevice/decklink_dec_c.c
@@ -36,6 +36,10 @@ static const AVOption options[] = {
{ "standard", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 0x7fff9fffeLL}, 0, 0, DEC, "teletext_lines"},
{ "all", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 0x7ffffffffLL}, 0, 0, DEC, "teletext_lines"},
{ "channels", "number of audio channels", OFFSET(audio_channels), AV_OPT_TYPE_INT , { .i64 = 2 }, 2, 16, DEC },
+ { "duplex_mode", "duplex mode", OFFSET(duplex_mode), AV_OPT_TYPE_INT, { .i64 = 0}, 0, 2, DEC, "duplex_mode"},
+ { "unset", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 0}, 0, 0, DEC, "duplex_mode"},
+ { "half", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 1}, 0, 0, DEC, "duplex_mode"},
+ { "full", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 2}, 0, 0, DEC, "duplex_mode"},
{ NULL },
};
More information about the ffmpeg-cvslog
mailing list