[FFmpeg-cvslog] libspeexenc: add libspeex encoder
Justin Ruggles
git at videolan.org
Fri Oct 21 02:37:06 CEST 2011
ffmpeg | branch: master | Justin Ruggles <justin.ruggles at gmail.com> | Tue Oct 18 12:16:27 2011 -0700| [b606a017593b2a7a5f435f2b75b8de163c367ac6] | committer: Justin Ruggles
libspeexenc: add libspeex encoder
> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=b606a017593b2a7a5f435f2b75b8de163c367ac6
---
Changelog | 1 +
configure | 3 +-
doc/general.texi | 2 +-
libavcodec/Makefile | 1 +
libavcodec/allcodecs.c | 2 +-
libavcodec/libspeexenc.c | 324 ++++++++++++++++++++++++++++++++++++++++++++++
libavcodec/version.h | 2 +-
7 files changed, 331 insertions(+), 4 deletions(-)
diff --git a/Changelog b/Changelog
index f61d3e2..3041632 100644
--- a/Changelog
+++ b/Changelog
@@ -53,6 +53,7 @@ easier to use. The changes are:
- lut, lutrgb, and lutyuv filters
- boxblur filter
- Ut Video decoder
+- Speex encoding via libspeex
version 0.7:
diff --git a/configure b/configure
index a036873..1860dc8 100755
--- a/configure
+++ b/configure
@@ -178,7 +178,7 @@ External library support:
--enable-libopenjpeg enable JPEG 2000 decoding via OpenJPEG [no]
--enable-librtmp enable RTMP[E] support via librtmp [no]
--enable-libschroedinger enable Dirac support via libschroedinger [no]
- --enable-libspeex enable Speex decoding via libspeex [no]
+ --enable-libspeex enable Speex support via libspeex [no]
--enable-libtheora enable Theora encoding via libtheora [no]
--enable-libvo-aacenc enable AAC encoding via libvo-aacenc [no]
--enable-libvo-amrwbenc enable AMR-WB encoding via libvo-amrwbenc [no]
@@ -1406,6 +1406,7 @@ libopenjpeg_decoder_deps="libopenjpeg"
libschroedinger_decoder_deps="libschroedinger"
libschroedinger_encoder_deps="libschroedinger"
libspeex_decoder_deps="libspeex"
+libspeex_encoder_deps="libspeex"
libtheora_encoder_deps="libtheora"
libvo_aacenc_encoder_deps="libvo_aacenc"
libvo_amrwbenc_encoder_deps="libvo_amrwbenc"
diff --git a/doc/general.texi b/doc/general.texi
index c4c4414..b1c2534 100644
--- a/doc/general.texi
+++ b/doc/general.texi
@@ -682,7 +682,7 @@ following image formats are supported:
@tab Used in Sierra VMD files.
@item Smacker audio @tab @tab X
@item SMPTE 302M AES3 audio @tab @tab X
- at item Speex @tab @tab E
+ at item Speex @tab E @tab E
@tab supported through external library libspeex
@item True Audio (TTA) @tab @tab X
@item TrueHD @tab @tab X
diff --git a/libavcodec/Makefile b/libavcodec/Makefile
index c47424e..81881e4 100644
--- a/libavcodec/Makefile
+++ b/libavcodec/Makefile
@@ -576,6 +576,7 @@ OBJS-$(CONFIG_LIBSCHROEDINGER_ENCODER) += libschroedingerenc.o \
libschroedinger.o \
libdirac_libschro.o
OBJS-$(CONFIG_LIBSPEEX_DECODER) += libspeexdec.o
+OBJS-$(CONFIG_LIBSPEEX_ENCODER) += libspeexenc.o
OBJS-$(CONFIG_LIBTHEORA_ENCODER) += libtheoraenc.o
OBJS-$(CONFIG_LIBVO_AACENC_ENCODER) += libvo-aacenc.o mpeg4audio.o
OBJS-$(CONFIG_LIBVO_AMRWBENC_ENCODER) += libvo-amrwbenc.o
diff --git a/libavcodec/allcodecs.c b/libavcodec/allcodecs.c
index f85f06d..64669b7 100644
--- a/libavcodec/allcodecs.c
+++ b/libavcodec/allcodecs.c
@@ -370,7 +370,7 @@ void avcodec_register_all(void)
REGISTER_DECODER (LIBOPENCORE_AMRWB, libopencore_amrwb);
REGISTER_DECODER (LIBOPENJPEG, libopenjpeg);
REGISTER_ENCDEC (LIBSCHROEDINGER, libschroedinger);
- REGISTER_DECODER (LIBSPEEX, libspeex);
+ REGISTER_ENCDEC (LIBSPEEX, libspeex);
REGISTER_ENCODER (LIBTHEORA, libtheora);
REGISTER_ENCODER (LIBVO_AACENC, libvo_aacenc);
REGISTER_ENCODER (LIBVO_AMRWBENC, libvo_amrwbenc);
diff --git a/libavcodec/libspeexenc.c b/libavcodec/libspeexenc.c
new file mode 100644
index 0000000..18f973f
--- /dev/null
+++ b/libavcodec/libspeexenc.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2009 Justin Ruggles
+ * Copyright (c) 2009 Xuggle Incorporated
+ *
+ * This file is part of Libav.
+ *
+ * Libav is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * Libav is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with Libav; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ * libspeex Speex audio encoder
+ *
+ * Usage Guide
+ * This explains the values that need to be set prior to initialization in
+ * order to control various encoding parameters.
+ *
+ * Channels
+ * Speex only supports mono or stereo, so avctx->channels must be set to
+ * 1 or 2.
+ *
+ * Sample Rate / Encoding Mode
+ * Speex has 3 modes, each of which uses a specific sample rate.
+ * narrowband : 8 kHz
+ * wideband : 16 kHz
+ * ultra-wideband : 32 kHz
+ * avctx->sample_rate must be set to one of these 3 values. This will be
+ * used to set the encoding mode.
+ *
+ * Rate Control
+ * VBR mode is turned on by setting CODEC_FLAG_QSCALE in avctx->flags.
+ * avctx->global_quality is used to set the encoding quality.
+ * For CBR mode, avctx->bit_rate can be used to set the constant bitrate.
+ * Alternatively, the 'cbr_quality' option can be set from 0 to 10 to set
+ * a constant bitrate based on quality.
+ * For ABR mode, set avctx->bit_rate and set the 'abr' option to 1.
+ * Approx. Bitrate Range:
+ * narrowband : 2400 - 25600 bps
+ * wideband : 4000 - 43200 bps
+ * ultra-wideband : 4400 - 45200 bps
+ *
+ * Complexity
+ * Encoding complexity is controlled by setting avctx->compression_level.
+ * The valid range is 0 to 10. A higher setting gives generally better
+ * quality at the expense of encoding speed. This does not affect the
+ * bit rate.
+ *
+ * Frames-per-Packet
+ * The encoder defaults to using 1 frame-per-packet. However, it is
+ * sometimes desirable to use multiple frames-per-packet to reduce the
+ * amount of container overhead. This can be done by setting the
+ * 'frames_per_packet' option to a value 1 to 8.
+ */
+
+#include <speex/speex.h>
+#include <speex/speex_header.h>
+#include <speex/speex_stereo.h>
+#include "libavutil/mathematics.h"
+#include "libavutil/opt.h"
+#include "avcodec.h"
+#include "internal.h"
+
+typedef struct {
+ AVClass *class; ///< AVClass for private options
+ SpeexBits bits; ///< libspeex bitwriter context
+ SpeexHeader header; ///< libspeex header struct
+ void *enc_state; ///< libspeex encoder state
+ int frames_per_packet; ///< number of frames to encode in each packet
+ float vbr_quality; ///< VBR quality 0.0 to 10.0
+ int cbr_quality; ///< CBR quality 0 to 10
+ int abr; ///< flag to enable ABR
+ int pkt_frame_count; ///< frame count for the current packet
+ int lookahead; ///< encoder delay
+ int sample_count; ///< total sample count (used for pts)
+} LibSpeexEncContext;
+
+static av_cold void print_enc_params(AVCodecContext *avctx,
+ LibSpeexEncContext *s)
+{
+ const char *mode_str = "unknown";
+
+ av_log(avctx, AV_LOG_DEBUG, "channels: %d\n", avctx->channels);
+ switch (s->header.mode) {
+ case SPEEX_MODEID_NB: mode_str = "narrowband"; break;
+ case SPEEX_MODEID_WB: mode_str = "wideband"; break;
+ case SPEEX_MODEID_UWB: mode_str = "ultra-wideband"; break;
+ }
+ av_log(avctx, AV_LOG_DEBUG, "mode: %s\n", mode_str);
+ if (s->header.vbr) {
+ av_log(avctx, AV_LOG_DEBUG, "rate control: VBR\n");
+ av_log(avctx, AV_LOG_DEBUG, " quality: %f\n", s->vbr_quality);
+ } else if (s->abr) {
+ av_log(avctx, AV_LOG_DEBUG, "rate control: ABR\n");
+ av_log(avctx, AV_LOG_DEBUG, " bitrate: %d bps\n", avctx->bit_rate);
+ } else {
+ av_log(avctx, AV_LOG_DEBUG, "rate control: CBR\n");
+ av_log(avctx, AV_LOG_DEBUG, " bitrate: %d bps\n", avctx->bit_rate);
+ }
+ av_log(avctx, AV_LOG_DEBUG, "complexity: %d\n",
+ avctx->compression_level);
+ av_log(avctx, AV_LOG_DEBUG, "frame size: %d samples\n",
+ avctx->frame_size);
+ av_log(avctx, AV_LOG_DEBUG, "frames per packet: %d\n",
+ s->frames_per_packet);
+ av_log(avctx, AV_LOG_DEBUG, "packet size: %d\n",
+ avctx->frame_size * s->frames_per_packet);
+}
+
+static av_cold int encode_init(AVCodecContext *avctx)
+{
+ LibSpeexEncContext *s = avctx->priv_data;
+ const SpeexMode *mode;
+ uint8_t *header_data;
+ int header_size;
+ int32_t complexity;
+
+ /* channels */
+ if (avctx->channels < 1 || avctx->channels > 2) {
+ av_log(avctx, AV_LOG_ERROR, "Invalid channels (%d). Only stereo and "
+ "mono are supported\n", avctx->channels);
+ return AVERROR(EINVAL);
+ }
+
+ /* sample rate and encoding mode */
+ switch (avctx->sample_rate) {
+ case 8000: mode = &speex_nb_mode; break;
+ case 16000: mode = &speex_wb_mode; break;
+ case 32000: mode = &speex_uwb_mode; break;
+ default:
+ av_log(avctx, AV_LOG_ERROR, "Sample rate of %d Hz is not supported. "
+ "Resample to 8, 16, or 32 kHz.\n", avctx->sample_rate);
+ return AVERROR(EINVAL);
+ }
+
+ /* initialize libspeex */
+ s->enc_state = speex_encoder_init(mode);
+ if (!s->enc_state) {
+ av_log(avctx, AV_LOG_ERROR, "Error initializing libspeex\n");
+ return -1;
+ }
+ speex_init_header(&s->header, avctx->sample_rate, avctx->channels, mode);
+
+ /* rate control method and parameters */
+ if (avctx->flags & CODEC_FLAG_QSCALE) {
+ /* VBR */
+ s->header.vbr = 1;
+ speex_encoder_ctl(s->enc_state, SPEEX_SET_VBR, &s->header.vbr);
+ s->vbr_quality = av_clipf(avctx->global_quality / (float)FF_QP2LAMBDA,
+ 0.0f, 10.0f);
+ speex_encoder_ctl(s->enc_state, SPEEX_SET_VBR_QUALITY, &s->vbr_quality);
+ } else {
+ s->header.bitrate = avctx->bit_rate;
+ if (avctx->bit_rate > 0) {
+ /* CBR or ABR by bitrate */
+ if (s->abr) {
+ speex_encoder_ctl(s->enc_state, SPEEX_SET_ABR,
+ &s->header.bitrate);
+ speex_encoder_ctl(s->enc_state, SPEEX_GET_ABR,
+ &s->header.bitrate);
+ } else {
+ speex_encoder_ctl(s->enc_state, SPEEX_SET_BITRATE,
+ &s->header.bitrate);
+ speex_encoder_ctl(s->enc_state, SPEEX_GET_BITRATE,
+ &s->header.bitrate);
+ }
+ } else {
+ /* CBR by quality */
+ speex_encoder_ctl(s->enc_state, SPEEX_SET_QUALITY,
+ &s->cbr_quality);
+ speex_encoder_ctl(s->enc_state, SPEEX_GET_BITRATE,
+ &s->header.bitrate);
+ }
+ /* stereo side information adds about 800 bps to the base bitrate */
+ /* TODO: this should be calculated exactly */
+ avctx->bit_rate = s->header.bitrate + (avctx->channels == 2 ? 800 : 0);
+ }
+
+ /* set encoding complexity */
+ if (avctx->compression_level > FF_COMPRESSION_DEFAULT) {
+ complexity = av_clip(avctx->compression_level, 0, 10);
+ speex_encoder_ctl(s->enc_state, SPEEX_SET_COMPLEXITY, &complexity);
+ }
+ speex_encoder_ctl(s->enc_state, SPEEX_GET_COMPLEXITY, &complexity);
+ avctx->compression_level = complexity;
+
+ /* set packet size */
+ avctx->frame_size = s->header.frame_size;
+ s->header.frames_per_packet = s->frames_per_packet;
+
+ /* set encoding delay */
+ speex_encoder_ctl(s->enc_state, SPEEX_GET_LOOKAHEAD, &s->lookahead);
+ s->sample_count = -s->lookahead;
+
+ /* create header packet bytes from header struct */
+ /* note: libspeex allocates the memory for header_data, which is freed
+ below with speex_header_free() */
+ header_data = speex_header_to_packet(&s->header, &header_size);
+
+ /* allocate extradata and coded_frame */
+ avctx->extradata = av_malloc(header_size + FF_INPUT_BUFFER_PADDING_SIZE);
+ avctx->coded_frame = avcodec_alloc_frame();
+ if (!avctx->extradata || !avctx->coded_frame) {
+ speex_header_free(header_data);
+ speex_encoder_destroy(s->enc_state);
+ av_log(avctx, AV_LOG_ERROR, "memory allocation error\n");
+ return AVERROR(ENOMEM);
+ }
+
+ /* copy header packet to extradata */
+ memcpy(avctx->extradata, header_data, header_size);
+ avctx->extradata_size = header_size;
+ speex_header_free(header_data);
+
+ /* init libspeex bitwriter */
+ speex_bits_init(&s->bits);
+
+ print_enc_params(avctx, s);
+ return 0;
+}
+
+static int encode_frame(AVCodecContext *avctx, uint8_t *frame, int buf_size,
+ void *data)
+{
+ LibSpeexEncContext *s = avctx->priv_data;
+ int16_t *samples = data;
+ int sample_count = s->sample_count;
+
+ if (data) {
+ /* encode Speex frame */
+ if (avctx->channels == 2)
+ speex_encode_stereo_int(samples, s->header.frame_size, &s->bits);
+ speex_encode_int(s->enc_state, samples, &s->bits);
+ s->pkt_frame_count++;
+ s->sample_count += avctx->frame_size;
+ } else {
+ /* handle end-of-stream */
+ if (!s->pkt_frame_count)
+ return 0;
+ /* add extra terminator codes for unused frames in last packet */
+ while (s->pkt_frame_count < s->frames_per_packet) {
+ speex_bits_pack(&s->bits, 15, 5);
+ s->pkt_frame_count++;
+ }
+ }
+
+ /* write output if all frames for the packet have been encoded */
+ if (s->pkt_frame_count == s->frames_per_packet) {
+ s->pkt_frame_count = 0;
+ avctx->coded_frame->pts =
+ av_rescale_q(sample_count, (AVRational){ 1, avctx->sample_rate },
+ avctx->time_base);
+ if (buf_size > speex_bits_nbytes(&s->bits)) {
+ int ret = speex_bits_write(&s->bits, frame, buf_size);
+ speex_bits_reset(&s->bits);
+ return ret;
+ } else {
+ av_log(avctx, AV_LOG_ERROR, "output buffer too small");
+ return AVERROR(EINVAL);
+ }
+ }
+ return 0;
+}
+
+static av_cold int encode_close(AVCodecContext *avctx)
+{
+ LibSpeexEncContext *s = avctx->priv_data;
+
+ speex_bits_destroy(&s->bits);
+ speex_encoder_destroy(s->enc_state);
+
+ av_freep(&avctx->coded_frame);
+ av_freep(&avctx->extradata);
+
+ return 0;
+}
+
+#define OFFSET(x) offsetof(LibSpeexEncContext, x)
+#define AE AV_OPT_FLAG_AUDIO_PARAM | AV_OPT_FLAG_ENCODING_PARAM
+static const AVOption options[] = {
+ { "abr", "Use average bit rate", OFFSET(abr), AV_OPT_TYPE_INT, { 0 }, 0, 1, AE },
+ { "cbr_quality", "Set quality value (0 to 10) for CBR", OFFSET(cbr_quality), AV_OPT_TYPE_INT, { 8 }, 0, 10, AE },
+ { "frames_per_packet", "Number of frames to encode in each packet", OFFSET(frames_per_packet), AV_OPT_TYPE_INT, { 1 }, 1, 8, AE },
+ { NULL },
+};
+
+static const AVClass class = {
+ .class_name = "libspeex",
+ .item_name = av_default_item_name,
+ .option = options,
+ .version = LIBAVUTIL_VERSION_INT,
+};
+
+static const AVCodecDefault defaults[] = {
+ { "b", "0" },
+ { "compression_level", "3" },
+ { NULL },
+};
+
+AVCodec ff_libspeex_encoder = {
+ .name = "libspeex",
+ .type = AVMEDIA_TYPE_AUDIO,
+ .id = CODEC_ID_SPEEX,
+ .priv_data_size = sizeof(LibSpeexEncContext),
+ .init = encode_init,
+ .encode = encode_frame,
+ .close = encode_close,
+ .capabilities = CODEC_CAP_DELAY,
+ .sample_fmts = (const enum SampleFormat[]){ AV_SAMPLE_FMT_S16, AV_SAMPLE_FMT_NONE },
+ .long_name = NULL_IF_CONFIG_SMALL("libspeex Speex"),
+ .priv_class = &class,
+ .defaults = defaults,
+};
diff --git a/libavcodec/version.h b/libavcodec/version.h
index b89e6f1..ef30a69 100644
--- a/libavcodec/version.h
+++ b/libavcodec/version.h
@@ -21,7 +21,7 @@
#define AVCODEC_VERSION_H
#define LIBAVCODEC_VERSION_MAJOR 53
-#define LIBAVCODEC_VERSION_MINOR 13
+#define LIBAVCODEC_VERSION_MINOR 14
#define LIBAVCODEC_VERSION_MICRO 0
#define LIBAVCODEC_VERSION_INT AV_VERSION_INT(LIBAVCODEC_VERSION_MAJOR, \
More information about the ffmpeg-cvslog
mailing list